Quality Assurance

Company Description

Morphedo Technologies Pvt. Ltd. is a deep-tech engineering company dedicated to advancing R&D, prototyping, and product development across Aerospace & Defence, Medical Devices, Industrial IoT, Embedded Systems, and AI-integrated solutions. Focused on "Make-in-India" and "Certify-for-the-World" strategies, we support innovation from concept to commercialization. Our strong global partnerships and in-house R&D capabilities enable us to develop world-class products. Morphedo is committed to driving technological excellence and contributing to the development of cutting-edge solutions.

Role Description

This is a full-time, on-site role located in Noida for a Quality Assurance & Production Engineer. The selected candidate will handle quality control processes, implement quality assurance measures, and maintain adherence to Good Manufacturing Practices (GMP). Responsibilities include conducting quality audits, enhancing production processes, and collaborating with cross-functional teams to ensure the manufacturing of world-class products. The role also involves documenting and maintaining compliance with quality management standards.

Location:
Noida

Function:
Manufacturing & Operations – QA, NPI, Production Engineering

Domains:
Aerospace & Defence, Medical Devices, IoT & Embedded Systems

About the Role

You'll sit at the intersection of
quality, manufacturing, and productization,
owning incoming/in-process/final QA, building robust test processes, and driving NPI from proto to pilot to production. If you love turning engineering intent into
repeatable, auditable, and scalable
build processes, this role is for you.

What You'll Do

• Quality Assurance
• Run
  incoming, in-process, and final inspection (IQC/IPQC/FQC)
  for electro-mechanical assemblies, PCBs, cables, enclosures, and finished devices.
• Establish and maintain
  SOPs, WIs, checklists, control plans, and traceability
  (DHR/DMR where applicable).
• Lead
  first article inspection (FAI)
  , GR&R/MSA studies, and
  SPC
  (control charts, Cp/Cpk).
• Drive
  non-conformance
  handling: NCR logging, root-cause analysis (5-Why, Fishbone),
  8D/CAPA
  , and corrective/preventive actions.
• Conduct
  process & product audits
  ; support supplier audits and qualification with Procurement/Engineering.
• Ensure
  ESD
  ,
  5S
  , calibration, and safety compliance on the shop floor.
• Production Engineering
• Own
  NPI
  ramps: build routing, station setup,
  DFM/DFA
  reviews, jigs/fixtures/testers, and build validation (EVT/DVT/PVT).
• Create/maintain
  BOMs
  and
  routers
  ; coordinate with engineering for
  ECNs/ECOs
  ; maintain revision control.
• Define
  test plans
  : electrical (ICT/FCT), functional, burn-in, endurance; manage calibration cycles and golden units.
• Improve
  yield, takt time, throughput, and OEE
  with Lean methods (Kaizen, SMED, Kanban).
• Coordinate
  production planning
  with Operations; ensure materials readiness and line balancing.
• Liaise with external labs for
  environmental/reliability testing
  (e.g., thermal, vibration) and regulatory pre-checks.

Must-Haves

• 2–5 years
  in
  QA/Production/Manufacturing engineering
  for electro-mechanical, electronics, or medical/industrial products.
• Hands-on with
  inspection tools
  (calipers, micrometers, pin gauges),
  electrical test gear
  (DMM, LCR meter, oscilloscope), and basic
  debug
  .
• Strong grasp of
  SOPs/WIs
  ,
  NCR → CAPA → Verification
  ,
  SPC
  ,
  FAI
  , and
  traceability
  .
• Experience setting up
  assembly & test
  stations, creating
  jigs/fixtures
  , and writing
  test procedures
  .
• Familiar with
  DFM/DFA
  ,
  Lean/5S
  , and
  ESD
  practices.
• Clear communication, structured documentation, and cross-functional collaboration with design, supply chain, and vendors.

Good to Have (Big Plus)

• Exposure to any of:
  ISO 9001
  ,
  ISO medical)
  ,
  AS9100 (aero)
  ,
  IEC 60601
  ,
  IEC 61010
  ,
  IEC 62366
  ,
  MIL-STD-810
  .
• PCB assembly standards (
  IPC-A-610
  ,
  J-STD-001
  ), cable harness (
  IPC/WHMA-A-620
  ).
• Experience with
  ICT/FCT
  , boundary scan, automated optical inspection (
  AOI
  ),
  X-ray
  , environmental chambers.
• Familiarity with
  ERP/MES
  (BOMs, routings, lot/serial traceability),
  Minitab
  or similar for stats, and simple
  Python
  scripts for test automation/log parsing.
• Vendor/supplier quality exposure and
  audit participation
  .

Tools & Stack (Representative)

• Measurement & Test: DMM, oscilloscope, LCR, hipot, functional testers, AOI/X-ray (where applicable), thermal/vibration chambers.
• Process & Data: Google Workspace/Excel, ERP/MES, basic SQL/CSV handling; Minitab/SPC; Jira/Confluence or equivalent.
• Methods: 5S, PFMEA/DFMEA, 8D, 5-Why, Ishikawa, control plans, GR&R.

Education

Diploma/B.Tech in
Mechanical/Electronics/Mechatronics/Industrial
or equivalent. Certifications in
Lean/6σ
,
IPC
, or
ISO
are an advantage.

What Success Looks Like at Morphedo

Reliable builds that pass audits, scale smoothly from proto to production, and
delight customers with consistent quality
—without slowing down innovation.

Hiring Process (Quick)

Intro call → Technical & problem-solving round (QA + Production) → Case assessment or portfolio walk-through → Final round & offer.

How to Apply

Email

• with subject
  "QA & Production Engineer – 2–5 yrs – YourName"
  . Attach your resume and list
  two improvements
  you shipped (before/after metrics).