Design Engineer – Boiler

7 days ago

Hyderabad, Telangana, India Hylenr Technologies Private Limited Full time ₹ 12,00,000 - ₹ 24,00,000 per year

Job Title:
Design Engineer – Boiler & Heat Exchanger Design

Location:
Hyderabad

Experience:
3-7 years

Job Summary:

We are seeking a skilled and detail-oriented Design Engineer with experience in Waste Heat Recovery Boilers (WHRB), sponge iron (DRI) processes, and associated heat exchanger systems. The candidate will be responsible for complete mechanical and process design activities including equipment sizing, layout preparation, and detailed engineering documentation for high-temperature process systems such as tail gas boilers, steam generation units, piping systems, and other critical equipment.

Key Responsibilities:

  1. Heat Exchanger & Boiler System Design


• Design and analysis of Waste Heat Recovery Boilers (WHRB), tail gas boilers, and steam generation systems.
• Perform heat and mass balance (HMBD) calculations.


• Carry out tube thickness calculation for heat exchangers and boilers as per relevant codes (ASME/API).


• Select appropriate materials of construction for high-temperature and corrosive environments.

  1. Equipment Sizing & Specification


• Pump sizing and valve selection including manual, motorized, control, safety, relief, blowdown, and sacrificing valves.


• Safety valve calculation and specification as per boiler codes.


• Fan sizing and selection for forced/induced draft systems.


• Design and selection of demister pads, silencers, boiler feed water pumps, and deaerators.

  1. Piping & Utility Design


• Perform pipe sizing calculations for steam, water, and process gases.


• Prepare detailed pipeline list, duct schedules, riser and downcomer specifications, and utility balance.


• Develop insulation and refractory schedules based on process conditions.

  1. Engineering Documentation


• Preparation of P&IDs, General Arrangement (GA) drawings, and layout drawings.


• Develop and maintain engineering documents such as: o Contract Data Sheets (CDS) o Valve & equipment specifications o Design basis documents o Datasheets for pumps, valves, demisters, silencers, etc.

  1. Cross-functional Collaboration


• Interface with procurement, fabrication, and site teams for technical clarifications.


• Coordinate with vendors for sizing and selection of bought-out items.


• Support project execution with design inputs and documentation.

Required Skills & Competencies:


• Strong understanding of thermodynamics, fluid mechanics, and heat transfer principles.


• Hands-on experience with steam generation systems, boiler auxiliary systems, and coke calcination processes.


• Proficient in design codes such as ASME Section I / VIII, API, TEMA, and piping standards.


• Experience with engineering tools/software such as AutoCAD, SolidWorks, HTRI, or similar.


• Excellent documentation and communication skills.


• Ability to handle multiple projects and meet deadlines.

Preferred Experience:


• Prior experience in sponge iron plants, coke oven gas systems, or process utilities is a strong advantage.


• Exposure to EPC projects and plant design workflows.

Immediate Joiners are preferred.

  • Design Engineer- Boilers

    2 days ago

    Hyderabad, Telangana, India Hylenr Technologies Full time ₹ 8,00,000 - ₹ 12,00,000 per year

    Job Title: Design Engineer Boiler & Heat Exchanger DesignLocation: HyderabadExperience: 3-7 yearsJob Summary:We are seeking a skilled and detail-oriented Design Engineer with experience in Waste Heat Recovery Boilers (WHRB), sponge iron (DRI) processes, and associated heat exchanger systems. The candidate will be responsible for complete mechanical and...

  • Design Engineer

    2 weeks ago

    Hyderabad, Telangana, India Hylenr Technologies Private Limited Full time ₹ 5,00,000 - ₹ 15,00,000 per year

    Job Title: Design Engineer – Heat Exchanger DesignLocation: HyderabadExperience: 3-7 yearsJob Summary:We are seeking a skilled and detail-oriented Design Engineer with experience in Waste Heat Recovery Boilers (WHRB), sponge iron (DRI) processes, and associated heat exchanger systems. The candidate will be responsible for complete mechanical and process...

  • Hiring – Design Engineer

    4 days ago

    Hyderabad, Telangana, India Speriti Solutions Full time ₹ 6,00,000 - ₹ 18,00,000 per year

    Job Title:Design Engineer – Boiler & Heat Exchanger DesignLocation:Hyderabad work from officeExperience:3-7 years (Immediate Joiners are preferred.)Job Summary:We are seeking a skilled and detail-oriented Design Engineer with experience in Waste Heat Recovery Boilers (WHRB), sponge iron (DRI) processes, and associated heat exchanger systems. The candidate...

  • Senior Electrical Design Engineer(Detail Engineering Boilers)

    2 weeks ago

    Hyderabad, Telangana, India Thermal Systems Full time ₹ 15,00,000 - ₹ 25,00,000 per year

    Ideally, an applicant shall process the fallowing skills and experience is essential..Role & responsibilities:Develop cable routing layouts, grounding/earthing layouts, and lighting systems for boiler houses and power plants.Ensure compliance with IS, IEC, IEEE standards and statutory requirements (CEIG, CEA, IBR-related electrical compliance).Review vendor...

  • Boiler design in Power Plant/BE Mech/12yrs/18laks/Hyderabad

    2 weeks ago

    Hyderabad, Telangana, India Prathiba Management Consultants Full time ₹ 2,16,000 - ₹ 7,20,000 per year

    BE Mechanical with 12 yrs experience in Boiler design in power plant preferbly in waste heat recovery Boilers. Clear technical thinking, software fluency, oral&written com skills with consultant and various engg depts.Design exp of various equipments

  • Electrical Design Engineer

    2 weeks ago

    Hyderabad, Telangana, India Thermal Systems Full time ₹ 9,00,000 - ₹ 12,00,000 per year

    Job Role:As an Electrical Design Engineer, you will support the Detail Engineering Department in preparing and reviewing electrical designs for industrial and utility boilers. You will be responsible for developing deliverables under the guidance of senior team members, ensuring accuracy and compliance with standards.Key Responsibilities:Prepare and review...

  • Instrumentation design in Boilers/BE Instrumemn/10yrs/14laks/Hyderabad

    2 weeks ago

    Hyderabad, Telangana, India Prathiba Management Consultants Full time ₹ 5,00,000 - ₹ 15,00,000 per year

    BE Instrumentation with 10-12 yrs experience in Instrumentation design in Boiler manufacturing or erection plant application willing 2 move to Hyderabad.Clear thinking, soft ware fluency, good written and oral communication skills good track record.

  • Welder

    2 weeks ago

    Hyderabad, Telangana, India S.A.L.C Boiler Engineering Works Full time

    We're Hiring – Fabrication Welder Join our team at S.A.L.C Boiler Engineering WorksWe are looking for a skilled and experienced Fabrication Weldercapable of handling a variety of industrial fabrication and erection works.Job Responsibilities:Fabrication and installation of industrial ducting with precision and accuracy.Pipeline and steam line fabrication...

  • Electrical Design Enggr in Boiler indus/BE Electrical/8yr/10lak/Hydbad

    2 weeks ago

    Hyderabad, Telangana, India Prathiba Management Consultants Full time ₹ 8,00,000 - ₹ 12,00,000 per year

    BE Electrical&*Electronics with 10 yrs experience in Electrical design in power plant or in Boiler manufacturing or in Projects with design as the primary focus. Must have clear technical thinking, software fluency, written&oral communication skill

  • Electrical Design Enggr in Boiler indus/BE Elec/15yr/15lak/Hyderabad

    6 days ago

    Hyderabad, Telangana, India Prathiba Management Consultants Full time ₹ 6,00,000 - ₹ 18,00,000 per year

    BE Elec14 yrs experience in Electrical designing in Power/Boiler industry.Must be proficient in cable scheduling, routing,voltage calculation, cable sizing for LT and HT,calculations of transformer sizing, voltage drop, Bus bar and cable tray sizing