CNC Bending Operetor

4 days ago

Virar Mumbai Maharashtra, India BALAJI METAL CRAFT Full time

1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
2) Positions and clamps end stops on machine to set specified location of bend.
3) Inserts or screws plug stops into guide wheel to set specified degree of bend.
4) Positions workpiece against end stop.
5) Locks holding clamp and guide clamp onto workpiece.
6) Lubricates workpiece with oil.
7) Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
8) May slide mandrel into tubing instead of using guide clamp.
9) May preheat workpiece, using hand torch or heating furnace.
10) May use hand-powered bending machine for short runs.
11) May fill tubes or pipe with sand, resin, or lead to prevent wrinkling or collapsing during bending operation.
12) May heat tube, using torch, and manually bend tube or pipe around forming blocks.
13) May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.
14) May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator I; Tube-Bending-Machine Operator I.

2) Positions and clamps end stops on machine to set specified location of bend.
3) Inserts or screws plug stops into guide wheel to set specified degree of bend.
4) Positions workpiece against end stop.
5) Locks holding clamp and guide clamp onto workpiece.
6) Lubricates workpiece with oil.
7) Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
8) May slide mandrel into tubing instead of using guide clamp.
9) May preheat workpiece, using hand torch or heating furnace.
10) May use hand-powered bending machine for short runs.
11) May fill tubes or pipe with sand, resin, or lead to prevent wrinkling or collapsing during bending operation.
12) May heat tube, using torch, and manually bend tube or pipe around forming blocks.
13) May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.
14) May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator I; Tube-Bending-Machine Operator I.

**Salary**: ₹15,000.00 - ₹20,000.00 per month

Schedule:

- Day shift
- Night shift

**Speak with the employer**
+91 9324209157

  • CNC Bending Operetor

    5 days ago

    Mumbai, India BALAJI METAL CRAFT Full time

    1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes,...

  • CNC Bending Operetor

    1 day ago

    Mumbai, India BALAJI METAL CRAFT Full time

    1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes,...

  • CNC Bending Operator

    4 days ago

    Velu, Pune, Maharashtra, India Bharat Lasers Full time

    CNC Bending Operator required having experience in sheet metal bending machine, understating of bending drawing and also knowledge of bending tools required as per bending jobs. **Job Types**: फ़ुल-टाइम, स्थायी Pay: ₹15,000.00 - ₹24,000.00 per month **Experience**: - Bending operator: 1 year (preferred) Shift...

  • CNC Bending Operator

    11 hours ago

    Chakan, Pune, Maharashtra, India Vimal Group Facilities Management Full time

    **Post - Cnc Bending Operator.**: - **Edu - No matter.Exp - 2 to 8 years**: - **Knowledge - Laser machine design drawing.**: - **Location - Chakan, Pune.**: - **Salary - 18,000/- rs to 22,000/- rs**: - **Contact - 7304490505/7758983822** **Salary**: ₹18,000.00 - ₹22,000.00 per month **Speak with the employer** +91 7758983822

  • CNC Operator

    5 days ago

    Wagholi, Pune, Maharashtra, India NCLOTECH SYSTEMS AND CONTROLS LLP Full time

    **CNC sheet bending machine operator** **Job description** **Roles and Responsibilities**: Understanding / reading of drawing given for work Operation on CNC controller and basic settings **Required Education and Experience**: High School Diploma or ITI. Basic knowledge of computer. Knowledge of machines and tools, including their designs, uses, repair...

  • Laser/bending Operator

    3 days ago

    Pirangut, Pune, Maharashtra, India Ms. Autocal Engineers Full time

    _**Third Party Pay Role Job**_ - **Company **_- MNC_ - **Job Profile**_ _- Laser/Bending Machine Operator/Programmer_ - **Job Location **_- Pirangut,Pune_ - **Education **_- ITI/DME / BE_ - **Experience **_-1-2 Years’ Experience in Laser operator_ - **Salary**_ _- 18000 TO 22000 CTC PM_ - **Role & Responsibilities**_ 1) Perform typical laser cutting...

  • CNC Bending Operator

    11 hours ago

    Mumbai, India Vision Display Pvt Ltd Full time

    Minimum of a High School Diploma. - Minimum of 2 years of experience as a CNC machine operator. - Strong computer skills. - Strong math skills. - Excellent technical skills. - Highly developed attention to detail. - Excellent analytical skills. - Highly developed concentration and precision. **Job Types**: Full-time, Regular / Permanent **Salary**:...

  • CNC Press Brake Operator

    5 days ago

    Pune, Maharashtra, India Techno Kraft Engineers Full time

    Require smart CNC press brake operator for various sheet metal bending purposes. Pay: ₹12,161.24 - ₹20,000.00 per month Schedule: - Day shift Supplemental Pay: - Overtime pay - Yearly bonus Work Location: In person

  • Metal Laser Machine Operator

    3 days ago

    Mumbai, Maharashtra, India Brand Sphere Full time

    Metal cutting machine operator And bending operator **Salary**: ₹15,000.00 - ₹20,000.00 per month Schedule: - Day shift Supplemental pay types: - Yearly bonus Ability to commute/relocate: - Mumbai, Maharashtra: Reliably commute or planning to relocate before starting work (required) **Education**: - Diploma (preferred) **Experience**: - CNC...

  • Press Shop Incharge

    11 hours ago

    Hingna, Nagpur, Maharashtra, India Eros Furnitures Pvt. Ltd. Full time

    **Must Have knowledge of fabrication work.** **Responsibilities and Duties** **Have to Supervise the working of Press Shop or Machine Shop Section and Assembly Section for fabrication work.** Sheet Metal fabrication work from Start to End Optimized Utilizations of Laser M/c and CNC bending m/c, MIG Welding & CNC Pipe Bending Able to handle 100...