SME - Floating Structure Design
1 month ago
BU: EDRC (Common) PT&D – Substation, Transmission Lines, Renewables
Title: Subject Matter Expert / Specialist (SME) – Floating Structure Design
MUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysis
Reports to (Job – Role) : Head of R&D (Renewables)
Reportee (Job – Role) : Senior Design Engineer
Education: Doctorate / M.Tech. in the field of Marine Architect / Marine Engineering / Off-shore Structure Engineering
Experience : 5+ years after Post Graduation OR 2 years of experience after Ph.D..
The experience shall cover practice in real time operating projects in the industry and in academics.
Exposure in Renewable Energy sectors like floating PV plants in the field of Structural Engineering.
Experience in analysing structures (Steel) subjected to mechanical / operating loads, mechanical vibrations, knowledge about CFD/FEA/FSI analysis, Wind Tunnel and Wave Pool Study, load stresses and behaviour of structures would be an advantage.
Objective: Responsible for timely, innovative, cost effective and workable engineering solutions for innovative and complex Structural Engineering challenges identified for Renewable Energy Sector.
The SME shall co-ordinate with of other disciplines viz., Electrical, MEP and others (BU) for receiving innovative and complex challenges and deliver necessary solutions.
The SME shall be able to prepare / review the anchoring and mooring design calculations, bring in structure design optimization, bring in innovative solutions, review of vendor documents, foundation design and review etc.
SME shall advise the Engineering team members as required to gain exposure and expertise to manage the Structural Engineering activities within budgeted cost / quantity, deliver on time and maintaining a high quality of engineering.
Key Responsibilities : Design, Analysis, Optimization, preparing fabrication drawing,
Floats Floats Shapes and sizing of Floats Arrangement / layout of floats Internal stiffening arrangement Strength assessment of the floats (FRP/ HDPE) Detail fabrication drawing for float laminates, stiffening arrangement. Walkways / Accessways Arrangement of walkways around floats Accessibility structures for panels servicing / maintenance Equipment foundations and arrangement Connections of walkway to the floats and strength assessment. Fabrication drawing for walkway, ladders, access platforms, equipment foundations. Float Interconnections Design of the horizontal interconnections of floats Strength assessment of the overall modules with the interconnection structure Fabrication drawings for horizontal interconnections. Connection design and strength assessmentFloat interconnections.
Design of the horizontal interconnections of floats Strength assessment of the overall modules with the interconnection structure Fabrication drawings for horizontal interconnections. Connection design and strength assessmentFloats Vertical Posts
Design and analysis of Vertical Posts Integration with floats and FPV panels Fabrication drawing preparation for vertical posts, connections with floats and FPV Connection design and Strength analysis Mooring pattern and mooring lines Arrangement of mooring lines Mooring analysis Connections of anchor lines with the module structure Fabrication drawing for mooring arrangement. Mooring anchorsAnchor pattern arrangement. Anchor design Fabrication drawing Module ConnectionsLayout of modules with feasibility of upscaling of the Plant capacity Connection design Global analysis for module interaction Fabrication drawings for module connections Module patterns and combined anchoring Arrangement of Array of modules Arrangement of Array of modules Limiting array size Combined mooring arrangementThe Execution of above-mentioned activities shall be done in following ways:
Detailed evaluation of Wind Loads. Hydrostatic analyses for the Float size and shape determinations Hydrodynamic analyses to evaluation of loading on floats Stability Analysis Mooring Analysis for mooring system design Structural analysis for strength design of Floats / Connection and topside. Finalization of Connections, scantlings and arrangements as per strength requirement. Final Hydrodynamic, mooring and structural analysis. Production of detailed fabrication drawing. Global Hydrodynamic, mooring and Structural Analysis with interconnected floats SME will be responsible to solve challenging Floating Structure Engineering issues by incorporating innovative designs, materials, assembly / manufacturing processes etc., which leads to techno-commercially advanced product, solutions leading to successful commercialization of such innovative designs / products offering an edge over competitors and over existing engineering practise as required by different Business Units of PTD IC. Must be capable of preparing detailed technical specifications and 2D / 3D designs / drawings, detailed BoM, construction methodology, production friendly design, cost effective materials / methods, defining necessary test procedure, standards and compliances, 3rd party certifications, conduct and assess results of field trials to commercialize R&D products / technologies. Must possess proven command over innovative materials and advanced manufacturing techniques / tools for cost-effective production. Provide necessary advice / recommendations / solutions to critical structural design issues faced by project engineering teams of different BUs to enable them towardsCorrect interpretation of contract specification to ensure proper adherence to the scope of work and technical requirements.Receiving necessary approvals from Clients, Consultants, or other parties as per project requirementsReview and recommend over critical issues pertaining to Structural EngineeringRisk analysis for taking proper decisions, analysing the risk, impacts and mitigation measures. Generating Intellectual Property (IP) and knowledge sharing for the company through Filling and defending existing and new patents, design registrations, copyrights etc. Presentation of findings through research papers, popular talks in seminars, white papers, podcasts etc as per Company Policy.Technical Expertise :
Should be Proficient in following areas:
Structural Analysis, Finite Element Analysis, Fluid Surface Interaction Analysis of framed structures, Plates and shells Applications of finite element for elastic stability Mechanics of Structural Materials Mechanical Behaviour of Metals and Polymers. Constitutive relation, deformation maps. Mechanical Behaviour of Frictional materials. Stress-strain and strength behaviour of frictional materials such as soils, rock, concrete, and Steel Stability and Nonlinear Analysis Stability of Structures. Bucking of bars, frames, and trusses Nonlinear Structural Analysis Numerical solution of nonlinear algebraic equations, implicit and explicit time integration techniques Dynamics and Earthquake Engineering Nonlinear MDOF systems, Numerical Integration Algorithms Vibration control techniques, Tuned Mass Dampers, Seismic base isolation Reinforced Cement Concrete Structures and Prestressed Concrete Structures Design of reinforced concrete elements, flat slabs and yield line theory-based design Steel Structures Design of Cold Formed Steel (CFS), light gauge steel / Aluminium structures Design of connections - Riveted, Bolted and Welded Composite hybrid design Sway and Non-sway frames Plastic analysis of structures Floating Structures Anchoring and Mooring analysis and design Wind Analysis Analysis and design of profiles and materialsOperating Network :
Internally: PEMs, Head of EDRC, BU Heads & Project heads, Reportees, Supply Chain Management, Quality, Contracts Team, Cluster Heads, Safety through proper channel. Externally: Clients at decision making level & Consultant (Team Leads) through Engineering team on need basis.Key Performance Indicators :
Productivity, On Time Delivery Customer Satisfaction Development of Team members Innovative Solutions in ProjectsSoftware Skills Required :
AUTOCAD 2D & 3D, REVIT, STAAD, ETABS, SAFE, MAT3D ANSYS AQWA / MOSES, ORCAFLEX, ANSYS MECHANICAL, Solid works CAD, solid works flow simulation. MS Office toolsBehavioural Attributes :
1.Innovative and out of box thinking mindset, 2.Self-motivated and unsupervised working 3.Leadership and problem solving 4.Efficient management of resources (Human, Time, Financial) 5.Efficient communication and presentation skills (all forms)Others: As defined in the DC competencies for the respective Tier.
-
SME - Floating Structure Design
2 months ago
Chennai, India Larsen & Toubro Full timeBU: EDRC (Common) PT&D – Substation, Transmission Lines, Renewables Title: Subject Matter Expert / Specialist (SME) – Floating Structure Design MUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysis Reports to (Job – Role) : Head of R&D (Renewables) Reportee (Job – Role) : Senior Design Engineer ...
-
SME - Floating Structure Design
7 days ago
Chennai, India Larsen & Toubro Full timeBU: EDRC (Common) PT&D – Substation, Transmission Lines, Renewables Title: Subject Matter Expert / Specialist (SME) – Floating Structure Design MUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysis Reports to (Job – Role) : Head of R&D (Renewables) Reportee (Job – Role) : Senior Design Engineer ...
-
SME - Floating Structure Design
6 days ago
chennai, India Larsen & Toubro Full timeBU: EDRC (Common) PT&D – Substation, Transmission Lines, Renewables Title: Subject Matter Expert / Specialist (SME) – Floating Structure Design MUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysis Reports to (Job – Role) : Head of R&D (Renewables) Reportee (Job – Role) : Senior Design...
-
Graduate Apprentice Trainee
1 month ago
Chennai, India ASE Structure Design Full time**Job Information**: Industry **Engineering** *** Work Experience **Fresher** *** City **Chennai** *** Province **Tamil Nadu** *** Country **India** *** Postal Code **600004** *** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil,...
-
Graduate Apprentice Trainee
3 days ago
Chennai, India ASE Structure Design Full time**Job Information**: Industry **Engineering** *** Work Experience **Fresher** *** City **Chennai** *** Province **Tamil Nadu** *** Country **India** *** Postal Code **600004** *** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil,...
-
Accounts Executive
3 days ago
Chennai, India ASE Structure Design Full time**Job Information**: Industry **Engineering** *** Work Experience **4-5 years** *** City **Chennai** *** Province **Tamil Nadu** *** Country **India** *** Postal Code **600004** *** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil,...
-
Bim Mep Modular
2 months ago
Chennai, India ASE Structure Design Full time**Job Information**: Industry **Telecommunications** *** Work Experience **1-3 years** *** City **Chennai** *** Province **Tamil Nadu** *** Country **India** *** Postal Code **600004** *** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil,...
-
Bim Modeler- Mep
1 month ago
Chennai, India ASE Structure Design Full time**Job Information**: Industry **Architecture & Construction** *** Work Experience **1-3 years** *** City **Chennai** *** Province **Tamil Nadu** *** Country **India** *** Postal Code **600004** *** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation...
-
Lead Structural Engineer
6 days ago
Chennai, India Indman Full timeJob Title: Lead Engineer – StructuralLocation: Chennai, IndiaContract: Direct HireDuration: Long TermMinimum Qualifications:BTech Degree in Civil/Structural Engineering; MSc/MTech Degree an advantage.Minimum Experience.:10-15 yrs. in offshore oil and gas facilities, drilling rigs with major Construction Yard/EPC contractor and/or consultant.Conversant with...
-
Walk in Autocad Freshers
1 month ago
Chennai, Tamil Nadu, India ASE Structure Design Full time**Job Information**: Industry **Telecommunications*** Work Experience **0-1 year*** Salary **10 K+*** City **Chennai*** Province **Tamil Nadu*** Country **India*** Postal Code **600004*** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil,...
-
Lead Structural Engineer
2 weeks ago
Chennai, India Indman Full timeJob Title: Lead Engineer – StructuralLocation: Chennai, IndiaContract: Direct HireDuration: Long TermMinimum Qualifications:BTech Degree in Civil/Structural Engineering; MSc/MTech Degree an advantage.Minimum Experience.: 10-15 yrs. in offshore oil and gas facilities, drilling rigs with major Construction Yard/EPC contractor and/or consultant.Conversant...
-
Lead Structural Engineer
3 weeks ago
Chennai, India Indman Full timeJob Title: Lead Engineer – StructuralLocation: Chennai, IndiaContract: Direct HireDuration: Long TermMinimum Qualifications:BTech Degree in Civil/Structural Engineering; MSc/MTech Degree an advantage.Minimum Experience.: 10-15 yrs. in offshore oil and gas facilities, drilling rigs with major Construction Yard/EPC contractor and/or consultant.Conversant...
-
Lead Structural Engineer
1 week ago
Chennai, India Indman Full timeJob Title: Lead Engineer – StructuralLocation: Chennai, IndiaContract: Direct HireDuration: Long TermMinimum Qualifications:BTech Degree in Civil/Structural Engineering; MSc/MTech Degree an advantage.Minimum Experience.: 10-15 yrs. in offshore oil and gas facilities, drilling rigs with major Construction Yard/EPC contractor and/or consultant.Conversant...
-
Lead Structural Engineer
7 days ago
Chennai, India Indman Full timeJob Title: Lead Engineer – StructuralLocation: Chennai, IndiaContract: Direct HireDuration: Long TermMinimum Qualifications:BTech Degree in Civil/Structural Engineering; MSc/MTech Degree an advantage.Minimum Experience.: 10-15 yrs. in offshore oil and gas facilities, drilling rigs with major Construction Yard/EPC contractor and/or consultant.Conversant...
-
Lead Structural Engineer
6 days ago
Chennai, India Indman Full timeJob Title: Lead Engineer – Structural Location: Chennai, India Contract: Direct Hire Duration: Long Term Minimum Qualifications: BTech Degree in Civil/Structural Engineering; MSc/MTech Degree an advantage. Minimum Experience.: 10-15 yrs. in offshore oil and gas facilities, drilling rigs with major Construction Yard/EPC contractor and/or consultant. ...
-
Structural Designer
1 week ago
Chennai, India McDermott Full timeAt Lutech Resources, we thrive by making you successful. On any given day, more than 3,000 individuals go to work at Lutech Resources jobs. When you partner with us, you’re joining a team that: - Appreciates your distinctive talents, skills, and perspective - Provides forthright feedback and career guidance - Connects you with prized and coveted...
-
Structural Designer
2 weeks ago
Chennai, India McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Structural Designer
3 weeks ago
chennai, India LutechResources Full timeJob Overview: Prepare and develop arrangement and detail FEED, studies and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction. Assist in the preparation of 3D models. Ensure work is in compliance with MDR and project QA and/or QC systems and procedures. Apply basic technical...
-
Structural Designer
6 days ago
chennai, India LutechResources Full timeJob Overview: Prepare and develop arrangement and detail FEED, studies and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction. Assist in the preparation of 3D models. Ensure work is in compliance with MDR and project QA and/or QC systems and procedures. Apply basic technical...
-
Civil/Structural Designer
4 weeks ago
Chennai, India McDermott International Full timeJob Overview: The Civil/Structural Designer utilizes 3D modeling and drafting software in the production of civil and structural design drawings for Oil & Gas, LNG, and Renewables Industry projects including structures, piperacks, modules, foundations, etc. The work includes conceptual studies, FEEDs, estimates, detail design, and construction...