SME - Floating Structure Design

4 weeks ago

Chennai, India Larsen & Toubro Full time

BU:  EDRC (Common) PT&D – Substation, Transmission Lines, Renewables

Title: Subject Matter Expert / Specialist (SME) –  Floating Structure Design

MUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysis

Reports to (Job – Role) : Head of R&D (Renewables)

Reportee (Job – Role) : Senior Design Engineer

Education: Doctorate / M.Tech. in the field of Marine Architect / Marine Engineering / Off-shore Structure Engineering 

Experience : 5+ years after Post Graduation OR 2 years of experience after Ph.D.. 

The experience shall cover practice in real time operating projects in the industry and in academics. 

Exposure in Renewable Energy sectors like floating PV plants in the field of Structural Engineering.

Experience in analysing structures (Steel) subjected to mechanical / operating loads, mechanical vibrations, knowledge about CFD/FEA/FSI  analysis, Wind Tunnel and Wave Pool Study, load stresses and behaviour of structures would be an advantage.

Objective:  Responsible for timely, innovative, cost effective and workable engineering solutions for innovative and complex Structural Engineering challenges identified for Renewable Energy Sector. 

The SME shall co-ordinate with of other disciplines viz., Electrical, MEP and others (BU) for receiving innovative and complex challenges and deliver necessary solutions. 

The SME shall be able to prepare / review the anchoring and mooring design calculations, bring in structure design optimization, bring in innovative solutions, review of vendor documents, foundation design and review etc. 

SME shall advise the Engineering team members as required to gain exposure and expertise to manage the Structural Engineering activities within budgeted cost / quantity, deliver on time and maintaining a high quality of engineering.

Key Responsibilities : Design, Analysis, Optimization, preparing fabrication drawing, 

 Floats Floats Shapes and sizing of Floats Arrangement / layout of floats Internal stiffening arrangement Strength assessment of the floats (FRP/ HDPE) Detail fabrication drawing for float laminates, stiffening arrangement.  Walkways / Accessways Arrangement of walkways around floats Accessibility structures for panels servicing / maintenance Equipment foundations and arrangement Connections of walkway to the floats and strength assessment. Fabrication drawing for walkway, ladders, access platforms, equipment foundations.  Float Interconnections Design of the horizontal interconnections of floats  Strength assessment of the overall modules with the interconnection structure  Fabrication drawings for horizontal interconnections.  Connection design and strength assessment 

Float interconnections. 

Design of the horizontal interconnections of floats  Strength assessment of the overall modules with the interconnection structure  Fabrication drawings for horizontal interconnections.  Connection design and strength assessment 

Floats Vertical Posts 

Design and analysis of Vertical Posts  Integration with floats and FPV panels  Fabrication drawing preparation for vertical posts, connections with floats and FPV  Connection design and Strength analysis  Mooring pattern and mooring lines Arrangement of mooring lines Mooring analysis Connections of anchor lines with the module structure Fabrication drawing for mooring arrangement.  Mooring anchorsAnchor pattern arrangement. Anchor design Fabrication drawing  Module ConnectionsLayout of modules with feasibility of upscaling of the Plant capacity Connection design Global analysis for module interaction Fabrication drawings for module connections  Module patterns and combined anchoring Arrangement of Array of modules  Arrangement of Array of modules  Limiting array size  Combined mooring arrangement 

The Execution of above-mentioned activities shall be done in following ways: 

Detailed evaluation of Wind Loads.  Hydrostatic analyses for the Float size and shape determinations Hydrodynamic analyses to evaluation of loading on floats  Stability Analysis  Mooring Analysis for mooring system design  Structural analysis for strength design of Floats / Connection and topside.  Finalization of Connections, scantlings and arrangements as per strength requirement.  Final Hydrodynamic, mooring and structural analysis.  Production of detailed fabrication drawing.  Global Hydrodynamic, mooring and Structural Analysis with interconnected floats  SME will be responsible to solve challenging Floating Structure Engineering issues by incorporating innovative designs, materials, assembly / manufacturing processes etc., which leads to techno-commercially advanced product, solutions leading to successful commercialization of such innovative designs / products offering an edge over competitors and over existing engineering practise as required by different Business Units of PTD IC.  Must be capable of preparing detailed technical specifications and 2D / 3D designs / drawings, detailed BoM, construction methodology, production friendly design, cost effective materials / methods, defining necessary test procedure, standards and compliances, 3rd party certifications, conduct and assess results of field trials to commercialize R&D products / technologies. Must possess proven command over innovative materials and advanced manufacturing techniques / tools for cost-effective production. Provide necessary advice / recommendations / solutions to critical structural design issues faced by project engineering teams of different BUs to enable them towardsCorrect interpretation of contract specification to ensure proper adherence to the scope of work and technical requirements.Receiving necessary approvals from Clients, Consultants, or other parties as per project requirementsReview and recommend over critical issues pertaining to Structural EngineeringRisk analysis for taking proper decisions, analysing the risk, impacts and mitigation measures. Generating Intellectual Property (IP) and knowledge sharing for the company through Filling and defending existing and new patents, design registrations, copyrights etc. Presentation of findings through research papers, popular talks in seminars, white papers, podcasts etc as per Company Policy.

Technical Expertise : 

Should be Proficient in following areas:

Structural Analysis, Finite Element Analysis, Fluid Surface Interaction Analysis of framed structures, Plates and shells Applications of finite element for elastic stability Mechanics of Structural Materials Mechanical Behaviour of Metals and Polymers. Constitutive relation, deformation maps. Mechanical Behaviour of Frictional materials. Stress-strain and strength behaviour of frictional materials such as soils, rock, concrete, and Steel Stability and Nonlinear Analysis Stability of Structures. Bucking of bars, frames, and trusses  Nonlinear Structural Analysis Numerical solution of nonlinear algebraic equations, implicit and explicit time integration techniques Dynamics and Earthquake Engineering Nonlinear MDOF systems, Numerical Integration Algorithms Vibration control techniques, Tuned Mass Dampers, Seismic base isolation Reinforced Cement Concrete Structures and Prestressed Concrete Structures Design of reinforced concrete elements, flat slabs and yield line theory-based design Steel Structures Design of Cold Formed Steel (CFS), light gauge steel / Aluminium structures Design of connections - Riveted, Bolted and Welded Composite hybrid design Sway and Non-sway frames Plastic analysis of structures Floating Structures  Anchoring and Mooring analysis and design Wind Analysis Analysis and design of profiles and materials

Operating Network : 

Internally: PEMs, Head of EDRC, BU Heads & Project heads, Reportees, Supply Chain Management, Quality, Contracts Team, Cluster Heads, Safety through proper channel. Externally: Clients at decision making level & Consultant (Team Leads) through Engineering team on need basis.

Key Performance Indicators : 

Productivity, On Time Delivery  Customer Satisfaction Development of Team members Innovative Solutions in Projects

Software Skills Required : 

AUTOCAD 2D & 3D, REVIT, STAAD, ETABS, SAFE, MAT3D ANSYS AQWA / MOSES, ORCAFLEX, ANSYS MECHANICAL, Solid works CAD, solid works flow simulation.  MS Office tools

Behavioural Attributes : 

1.Innovative and out of box thinking mindset,  2.Self-motivated and unsupervised working 3.Leadership and problem solving  4.Efficient management of resources (Human, Time, Financial) 5.Efficient communication and presentation skills (all forms)

Others: As defined in the DC competencies for the respective Tier.

  • SME - Floating Structure Design

    1 week ago

    chennai, India Larsen & Toubro Full time

    BU:  EDRC (Common) PT&D – Substation, Transmission Lines, Renewables Title: Subject Matter Expert / Specialist (SME) –  Floating Structure Design MUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysis Reports to (Job – Role) : Head of R&D (Renewables) Reportee (Job – Role) : Senior Design...

  • SME - Floating Structure Design

    2 days ago

    Chennai, India Larsen & Toubro Full time

    BU:EDRC (Common) PT&D – Substation, Transmission Lines, RenewablesTitle:Subject Matter Expert / Specialist (SME) –Floating Structure DesignMUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysisReports to (Job – Role): Head of R&D (Renewables)Reportee (Job – Role): Senior Design EngineerEducation: Doctorate / M.Tech....

  • Graduate Apprentice Trainee

    1 week ago

    Chennai, India ASE Structure Design Full time

    **Job Information**: Industry **Engineering** *** Work Experience **Fresher** *** City **Chennai** *** Province **Tamil Nadu** *** Country **India** *** Postal Code **600004** *** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil,...

  • Accounts Executive

    5 days ago

    Chennai, India ASE Structure Design Full time

    **Job Information**: Industry **Engineering** *** Work Experience **4-5 years** *** City **Chennai** *** Province **Tamil Nadu** *** Country **India** *** Postal Code **600004** *** **About us**: ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil,...

  • Lead Structural Engineer

    4 weeks ago

    Chennai, India Barry-Wehmiller Design Group Full time

    Job description: Position requires a Structural Engineer with 5 to 15 years of experience with thorough knowledge of Civil & Structural design and Engineering techniques. Responsible to perform Structural calculations independently, lead projects & deliver good quality reports and drawings. Responsible to plan & conduct independent work requiring judgement...

  • Lead Structural Engineer

    4 weeks ago

    Chennai, India Barry-Wehmiller Design Group Full time

    Job description: Position requires a Structural Engineer with 5 to 15 years of experience with thorough knowledge of Civil & Structural design and Engineering techniques. Responsible to perform Structural calculations independently, lead projects & deliver good quality reports and drawings. Responsible to plan & conduct independent work requiring judgement...

  • Civil & Structural Design

    1 week ago

    chennai, India Larsen & Toubro Full time

    Should have experience in analysis and design of Heavy Industrial Steel Structures for Steel Plants, Beneficiation Plants, Mines, e.g. Steel Melting Shop, Converter Shops, Slab Casters, Blast Furnaces, Cast Houses, Stock Houses, Storage Bunkers, Indurating & Pelletising Buildings, Chimneys, Material Handling structures, etc. Should also be conversant in...

  • Civil & Structural Design

    4 weeks ago

    Chennai, India Larsen & Toubro Full time

    Should have experience in analysis and design of Heavy Industrial Steel Structures for Steel Plants, Beneficiation Plants, Mines, e.g. Steel Melting Shop, Converter Shops, Slab Casters, Blast Furnaces, Cast Houses, Stock Houses, Storage Bunkers, Indurating & Pelletising Buildings, Chimneys, Material Handling structures, etc. Should also be conversant in...

  • Structural Design Engineer

    4 weeks ago

    Chennai, India L&T Technology Services Full time

    Exp: 5-15 yearsLocation: BarodaOil & Gas industry experience is mustBachelor / Masters Degree in civil and structural engineering· Good skills in co-coordination with client, other disciplines, site team, contactors etc., · Basic knowledge of Industrial Architecture, PHE and Roadways. · Strong experience in RCC and structural steel buildings structural...

  • Structural Design Engineer

    4 weeks ago

    Chennai, India L&T Technology Services Limited Full time

    Exp: 5-15 years Location: Baroda Oil & Gas industry experience is must Bachelor / Masters Degree in civil and structural engineering · Good skills in co-coordination with client, other disciplines, site team, contactors etc., · Basic knowledge of Industrial Architecture, PHE and Roadways. · Strong experience in RCC and structural steel buildings...

  • Structural Design Engineer

    4 weeks ago

    Chennai, India L&T Technology Services Limited Full time

    Exp: 5-15 yearsLocation: BarodaOil & Gas industry experience is mustBachelor / Masters Degree in civil and structural engineering· Good skills in co-coordination with client, other disciplines, site team, contactors etc., · Basic knowledge of Industrial Architecture, PHE and Roadways. · Strong experience in RCC and structural steel buildings structural...

  • Structural Design Engineer

    4 weeks ago

    Chennai, India L&T Technology Services Limited Full time

    Exp: 5-15 yearsLocation: BarodaOil & Gas industry experience is mustBachelor / Masters Degree in civil and structural engineering· Good skills in co-coordination with client, other disciplines, site team, contactors etc., · Basic knowledge of Industrial Architecture, PHE and Roadways. · Strong experience in RCC and structural steel buildings structural...

  • Civil & Structural - (E3D Designer )

    2 days ago

    Chennai, India Shimi Designs and Consulting Engineers ( P ) Ltd Full time

    The Civil & Structural - (E3D Designer) is responsible for the design and documentation of civil and structural projects using E3D software. This includes creating 3D models, generating drawings, and producing reports. The ideal candidate will have a strong understanding of civil and structural engineering principles, as well as experience with E3D...

  • Principal Civil/Structural Designer

    4 days ago

    Chennai, India McDermott International Full time

    Job Overview: The Principal Civil/Structural Designer directly impacts the effectiveness of their team and related team. They exchange ideas and information relating to Civil/Structural Design effectively. They may work autonomously within established Civil/Structural Design procedures and practices. They act as a lead, coordinating the work of...

  • Principal Civil/Structural Designer

    3 days ago

    chennai, India McDermott International Full time

    Job Overview: The Principal Civil/Structural Designer directly impacts the effectiveness of their team and related team. They exchange ideas and information relating to Civil/Structural Design effectively. They may work autonomously within established Civil/Structural Design procedures and practices. They act as a lead, coordinating the work of...

  • Structural Designer

    4 weeks ago

    Chennai, Tamil Nadu, India Conserve Solutions LLP. Full time

    Experience : 1+years Location : Chennai Degree : Diploma in civil/ B.E/B.Tech **Job description of Structural Designer - E3D** - Prepare steel erection plans as well as detailing individual structural steel members - Check 3D models, GA/erection drawings and fabrication drawings, ensuring there are zero errors - Check the connection possibilities and...

  • Structural Designer-tekla

    4 weeks ago

    Chennai, India NES FIRCROFT Full time

    We are recruiting for Offshore Structural Designer, please find below job details. Post: Offshore Structural Designer Location: Coimbatore: Employment Type: Contract Software: Tekla/ PDMS 1.Study and understand the structural scope of work and quickly become conversant to company procedures and standards. 2.Modeling and Detailing knowledge of both offshore...

  • Civil & Structural - (E3D Designer )

    4 weeks ago

    Chennai, India Shimi Designs and Consulting Engineers ( P ) Ltd Full time

    The Civil & Structural - (E3D Designer) is responsible for the design and documentation of civil and structural projects using E3D software. This includes creating 3D models, generating drawings, and producing reports. The ideal candidate will have a strong understanding of civil and structural engineering principles, as well as experience with E3D...

  • Civil & Structural - (E3D Designer )

    1 week ago

    chennai, India Shimi Designs and Consulting Engineers ( P ) Ltd Full time

    The Civil & Structural - (E3D Designer) is responsible for the design and documentation of civil and structural projects using E3D software. This includes creating 3D models, generating drawings, and producing reports. The ideal candidate will have a strong understanding of civil and structural engineering principles, as well as experience with E3D software....

  • Spidac - Pole Loading Analysis

    4 weeks ago

    Chennai, India ASE Structure Design Pvt Ltd Full time

    Should have bachelor’s/Master’s degree in Civil/Structural engineering.Should have 3 to 4 years’ experience in SPIDAcalcHand on experience with Telecom Structural Analysis using Canadian and US Codes.Should have strong knowledge on the Structural engineering concepts. Hand on Experience on ArcGIS. Good technical knowledge in extracting the data from...