SME - Floating Structure Design

1 week ago

Chennai, Tamil Nadu, India Larsen & Toubro Full time

BU: EDRC (Common) PT&D – Substation, Transmission Lines, Renewables

Title: Subject Matter Expert / Specialist (SME) – Floating Structure Design

MUST: Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysis

Reports to (Job – Role) : Head of R&D (Renewables)

Reportee (Job – Role) : Senior Design Engineer

Education: Doctorate / M.Tech. in the field of Marine Architect / Marine Engineering / Off-shore Structure Engineering

Experience : 5+ years after Post Graduation OR 2 years of experience after Ph.D..

The experience shall cover practice in real time operating projects in the industry and in academics.

Exposure in Renewable Energy sectors like floating PV plants in the field of Structural Engineering.

Experience in analysing structures (Steel) subjected to mechanical / operating loads, mechanical vibrations, knowledge about CFD/FEA/FSI analysis, Wind Tunnel and Wave Pool Study, load stresses and behaviour of structures would be an advantage.

Objective: Responsible for timely, innovative, cost effective and workable engineering solutions for innovative and complex Structural Engineering challenges identified for Renewable Energy Sector.

The SME shall co-ordinate with of other disciplines viz., Electrical, MEP and others (BU) for receiving innovative and complex challenges and deliver necessary solutions.

The SME shall be able to prepare / review the anchoring and mooring design calculations, bring in structure design optimization, bring in innovative solutions, review of vendor documents, foundation design and review etc.

SME shall advise the Engineering team members as required to gain exposure and expertise to manage the Structural Engineering activities within budgeted cost / quantity, deliver on time and maintaining a high quality of engineering.

Key Responsibilities : Design, Analysis, Optimization, preparing fabrication drawing,

Floats Floats Shapes and sizing of Floats Arrangement / layout of floats Internal stiffening arrangement Strength assessment of the floats (FRP/ HDPE) Detail fabrication drawing for float laminates, stiffening arrangement. Walkways / Accessways Arrangement of walkways around floats Accessibility structures for panels servicing / maintenance Equipment foundations and arrangement Connections of walkway to the floats and strength assessment. Fabrication drawing for walkway, ladders, access platforms, equipment foundations. Float Interconnections Design of the horizontal interconnections of floats Strength assessment of the overall modules with the interconnection structure Fabrication drawings for horizontal interconnections. Connection design and strength assessment

Float interconnections.

Design of the horizontal interconnections of floats Strength assessment of the overall modules with the interconnection structure Fabrication drawings for horizontal interconnections. Connection design and strength assessment

Floats Vertical Posts

Design and analysis of Vertical Posts Integration with floats and FPV panels Fabrication drawing preparation for vertical posts, connections with floats and FPV Connection design and Strength analysis Mooring pattern and mooring lines Arrangement of mooring lines Mooring analysis Connections of anchor lines with the module structure Fabrication drawing for mooring arrangement. Mooring anchorsAnchor pattern arrangement. Anchor design Fabrication drawing Module ConnectionsLayout of modules with feasibility of upscaling of the Plant capacity Connection design Global analysis for module interaction Fabrication drawings for module connections Module patterns and combined anchoring Arrangement of Array of modules Arrangement of Array of modules Limiting array size Combined mooring arrangement

The Execution of above-mentioned activities shall be done in following ways:

Detailed evaluation of Wind Loads. Hydrostatic analyses for the Float size and shape determinations Hydrodynamic analyses to evaluation of loading on floats Stability Analysis Mooring Analysis for mooring system design Structural analysis for strength design of Floats / Connection and topside. Finalization of Connections, scantlings and arrangements as per strength requirement. Final Hydrodynamic, mooring and structural analysis. Production of detailed fabrication drawing. Global Hydrodynamic, mooring and Structural Analysis with interconnected floats SME will be responsible to solve challenging Floating Structure Engineering issues by incorporating innovative designs, materials, assembly / manufacturing processes etc., which leads to techno-commercially advanced product, solutions leading to successful commercialization of such innovative designs / products offering an edge over competitors and over existing engineering practise as required by different Business Units of PTD IC. Must be capable of preparing detailed technical specifications and 2D / 3D designs / drawings, detailed BoM, construction methodology, production friendly design, cost effective materials / methods, defining necessary test procedure, standards and compliances, 3rd party certifications, conduct and assess results of field trials to commercialize R&D products / technologies. Must possess proven command over innovative materials and advanced manufacturing techniques / tools for cost-effective production. Provide necessary advice / recommendations / solutions to critical structural design issues faced by project engineering teams of different BUs to enable them towardsCorrect interpretation of contract specification to ensure proper adherence to the scope of work and technical requirements.Receiving necessary approvals from Clients, Consultants, or other parties as per project requirementsReview and recommend over critical issues pertaining to Structural EngineeringRisk analysis for taking proper decisions, analysing the risk, impacts and mitigation measures. Generating Intellectual Property (IP) and knowledge sharing for the company through Filling and defending existing and new patents, design registrations, copyrights etc. Presentation of findings through research papers, popular talks in seminars, white papers, podcasts etc as per Company Policy.

Technical Expertise :

Should be Proficient in following areas:

Structural Analysis, Finite Element Analysis, Fluid Surface Interaction Analysis of framed structures, Plates and shells Applications of finite element for elastic stability Mechanics of Structural Materials Mechanical Behaviour of Metals and Polymers. Constitutive relation, deformation maps. Mechanical Behaviour of Frictional materials. Stress-strain and strength behaviour of frictional materials such as soils, rock, concrete, and Steel Stability and Nonlinear Analysis Stability of Structures. Bucking of bars, frames, and trusses Nonlinear Structural Analysis Numerical solution of nonlinear algebraic equations, implicit and explicit time integration techniques Dynamics and Earthquake Engineering Nonlinear MDOF systems, Numerical Integration Algorithms Vibration control techniques, Tuned Mass Dampers, Seismic base isolation Reinforced Cement Concrete Structures and Prestressed Concrete Structures Design of reinforced concrete elements, flat slabs and yield line theory-based design Steel Structures Design of Cold Formed Steel (CFS), light gauge steel / Aluminium structures Design of connections - Riveted, Bolted and Welded Composite hybrid design Sway and Non-sway frames Plastic analysis of structures Floating Structures Anchoring and Mooring analysis and design Wind Analysis Analysis and design of profiles and materials

Operating Network :

Internally: PEMs, Head of EDRC, BU Heads & Project heads, Reportees, Supply Chain Management, Quality, Contracts Team, Cluster Heads, Safety through proper channel. Externally: Clients at decision making level & Consultant (Team Leads) through Engineering team on need basis.

Key Performance Indicators :

Productivity, On Time Delivery Customer Satisfaction Development of Team members Innovative Solutions in Projects

Software Skills Required :

AUTOCAD 2D & 3D, REVIT, STAAD, ETABS, SAFE, MAT3D ANSYS AQWA / MOSES, ORCAFLEX, ANSYS MECHANICAL, Solid works CAD, solid works flow simulation. MS Office tools

Behavioural Attributes :

1.Innovative and out of box thinking mindset, 2.Self-motivated and unsupervised working 3.Leadership and problem solving 4.Efficient management of resources (Human, Time, Financial) 5.Efficient communication and presentation skills (all forms)

Others: As defined in the DC competencies for the respective Tier.

  • SME - Floating Structure Design

    1 week ago

    Chennai, Tamil Nadu, India Larsen & Toubro Full time

    BU:EDRC (Common) PT&D – Substation, Transmission Lines, RenewablesTitle:Subject Matter Expert / Specialist (SME) –Floating Structure DesignMUST:Knowledge / Experience about CFD/FEA/FSI (Computational fluid dynamics) analysisReports to (Job – Role): Head of R&D (Renewables)Reportee (Job – Role):Senior Design EngineerEducation: Doctorate / M.Tech. in...

  • Structural Engineer

    1 week ago

    Chennai, Tamil Nadu, India ASE Structure Design Pvt Limited Full time

    Prepare Project plan and proposals for structural jobs.Handle Structural and Design team for Telecommunication structures, like Lattice Towers, Monopoles, Guyed Mast, Foundation Calculations, and its Mount Analysis in both Greenfield & Rooftop Structures using Design Codes in UK/Europe (BS codes / BS-EN Codes & Eurocode 1, 2 & 3) and US (TIA-222G, TIA-222H,...

  • Structural Engineer

    1 week ago

    Chennai, Tamil Nadu, India ASE Structure Design Pvt Limited Full time

    Prepare Project plan and proposals for structural jobs.Handle Structural and Design team for Telecommunication structures, like Lattice Towers, Monopoles, Guyed Mast, Foundation Calculations, and its Mount Analysis in both Greenfield & Rooftop Structures using Design Codes in UK/Europe (BS codes / BS-EN Codes & Eurocode 1, 2 & 3) and US (TIA-222 G, TIA-222...

  • Bim Modeler- Mep

    1 week ago

    Chennai, Tamil Nadu, India ASE Structure Design Full time

    Job Information:IndustryArchitecture & Construction***Work Experience1-3 years***CityChennai***ProvinceTamil Nadu***CountryIndia***Postal Code600004***About us:ASE Structure Design is a Indo-Belgium joint venture company commenced its operations in April 2003 and is involved in the preparation of Civil, Structural and Engineering drawings with supporting...

  • Lead Structural Engineer

    1 week ago

    Chennai, Tamil Nadu, India Indman Full time

    Job Title: Lead Engineer – Structural Location: Chennai, India Contract: Direct Hire Duration: Long Term Minimum Qualifications: BTech Degree in Civil/Structural Engineering; MSc/MTech Degree an advantage. Minimum Experience.: 10-15 yrs. in offshore oil and gas facilities, drilling rigs with major Construction Yard/EPC contractor and/or consultant. ...

  • Structural Designer

    1 week ago

    Chennai, Tamil Nadu, India McDermott Full time

    At Lutech Resources, we thrive by making you successful.On any given day, more than 3,000 individuals go to work at Lutech Resources jobs.When you partner with us, you're joining a team that: Appreciates your distinctive talents, skills, and perspective Provides forthright feedback and career guidance Connects you with prized and coveted employers Strives to...

  • Structural Designer

    1 week ago

    Chennai, Tamil Nadu, India LutechResources Full time

    Job Overview: Prepare and develop arrangement and detail FEED, studies and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction. Assist in the preparation of 3D models. Ensure work is in compliance with MDR and project QA and/or QC systems and procedures. Apply basic technical...

  • Civil/structural Designer

    1 week ago

    Chennai, Tamil Nadu, India McDermott Full time

    Job Overview:The Civil/Structural Designer provides solutions to problems in the Civil/Structural Design discipline without supervisory approval and will evaluate and select solutions from established operating procedures and/or scientific procedures.Key Tasks and Responsibilities: Ensure design deliverables are completed and issued per project...

  • Civil/Structural Designer

    1 week ago

    Chennai, Tamil Nadu, India McDermott International Full time

    Job Overview: The Civil/Structural Designer utilizes 3D modeling and drafting software in the production of civil and structural design drawings for Oil & Gas, LNG, and Renewables Industry projects including structures, piperacks, modules, foundations, etc. The work includes conceptual studies, FEEDs, estimates, detail design, and construction support.

  • Civil/Structural Designer

    1 week ago

    Chennai, Tamil Nadu, India LutechResources Full time

    Job Overview: The Civil/Structural Designer provides solutions to problems in the Civil/Structural Design discipline without supervisory approval and will evaluate and select solutions from established operating procedures and/or scientific procedures. Key Tasks and Responsibilities: Ensure design deliverables are completed and issued per project...

  • Designer - Offshore Structural

    1 week ago

    Chennai, Tamil Nadu, India KBR Full time

    **Title**:Designer - Offshore StructuralOffshore Structural Designers with SP3D modeling and draft experience

  • civil designer

    1 week ago

    Chennai, Tamil Nadu, India Tecnicas Reunidas Full time

    Senior Civil Designer, who has excellent knowledge on the design concepts of the Onshore Oil and Gas projects,Should have knowledge in 3D modeling, extraction and drawing verification related to activities herewith mentioned.Minimum 2 to 10 years of experience with Diploma in Civil engineering. Proven leadership experience and Tender for Lump Sum Projects...

  • Civil & Structural Design

    1 week ago

    Chennai, Tamil Nadu, India Larsen & Toubro Full time

    Civil & Structural DesignLNT/C-SDE/62406- Minerals & MetalsChennai Posted On 02 Feb 2024- Required ExperienceYearsSkills:Knowledge & Posting LocationCIVIL ENGINEERINGSTRUCTURAL ENGINEERINGMinimum QualificationB.TECH/B.EDIPLOMAJob Description: Should have experience in analysis and design of Heavy Industrial Steel Structures for Steel Plants, Beneficiation...

  • Offshore Structural Designer

    1 week ago

    Chennai, Tamil Nadu, India Brunel Full time

    We're hiring Offshore structural designer for one of our Leading MNC in Oil and gas to join their growing team. This position is based out in Chennai.About this rolePosition: Offshore structural designerYear of experience: 5 to 15 YearsLocation: ChennaiJob Type: Permanent Offshore structural designer; SP3D/ E3D/ Revit/ Tekla/ AutoCAD.What you need to...

  • Civil & Structural Design

    1 week ago

    Chennai, Tamil Nadu, India Larsen & Toubro Full time

    Should have experience in analysis and design of Heavy Industrial Steel Structures for Steel Plants, Beneficiation Plants, Mines, e.g. Steel Melting Shop, Converter Shops, Slab Casters, Blast Furnaces, Cast Houses, Stock Houses, Storage Bunkers, Indurating & Pelletising Buildings, Chimneys, Material Handling structures, etc. Should also be conversant in...

  • Structural Design Engineer

    1 week ago

    Chennai, Tamil Nadu, India Tata Communications Transformation Services (TCTS) Full time

    Job Description.:Professional skills:Professional with 5+ years of experience in 3D technical/structural drawing using AutoCAD of wireless telecom sites based on design/standard document and survey information.Key responsibilities:Study and analyze the input data from client, Structure information, Antenna details, Shelter information, Mount/strengthening...

  • Structural Design Engineer

    1 week ago

    Chennai, Tamil Nadu, India Tata Communications Transformation Services Full time

    Job Description:Professional skills:Professional with 5+ years of experience in 3 D technical/structural drawing using Auto CAD of wireless telecom sites based on design/standard document and survey information.Key responsibilities:Study and analyze the input data from client, Structure information, Antenna details, Shelter information, Mount/strengthening...

  • Offshore Structural Designer

    1 week ago

    Chennai, Tamil Nadu, India Wood Plc Full time

    Overview / Responsibilities:Wood is currently recruiting for Designer - Civil and Structural with offshore experience in the revamp projects. Take responsibility of engineering of the assigned structures / foundation as civil designer Model as per inputs and extract / check General Arrangement and Detail Drawings Report to the Lead Civil Designer / Lead...

  • Structural Design Engineer

    1 week ago

    Chennai, Tamil Nadu, India L&T Technology Services Full time

    Exp: 5-15 years Location: Baroda Oil & Gas industry experience is must Bachelor / Masters Degree in civil and structural engineering · Good skills in co-coordination with client, other disciplines, site team, contactors etc., · Basic knowledge of Industrial Architecture, PHE and Roadways. · Strong experience in RCC and structural steel buildings...

  • Civil/structural Designer

    1 week ago

    Chennai, Tamil Nadu, India McDermott Full time

    Job Overview:The Civil/Structural Designer provides solutions to problems in the Civil/Structural Design discipline without supervisory approval and will evaluate and select solutions from established operating procedures and/or scientific procedures.Key Tasks and Responsibilities: Prepare and develop arrangement and detail design drawings of high technical...