Auxiliary Design/ Packaging Engineer-Gas Turbine-Bangalore

Found in: Talent IN C2 - 2 weeks ago

Bengaluru, India Excellence and Eminence LLP Full time
We are looking for Auxiliary Design/ Packaging Engineer-Gas Turbine-Bangalore with 3 to 15 Yrs of Experience for our esteemed client for Bangalore Location.
Key Skills: Ancillary system, Skid Engineering, Gas Turbine, P&ID
Note: Candidate shall be willing to work at customer location.
This is an immediate requirement. Please apply if you can join within 20 days or close to 20 days.
Responsibilities
A Gas Turbine Auxiliary Mechanical expert - Design will be responsible for the Conceptual & detail design for Skid mechanical packaging design for Gas Turbine. He/ She will have the opportunity to introduce new technology to enhance company profitability and productivity. He/ She will be responsible for maintaining and incorporating new cost-effective solutions for designs. He/ She should be expert and responsible for designing of all/ some of the following;
• Plot plan, Turbo-Group general arrangement, machinery foundation, machinery main purchaser mechanical connection.
• Interconnecting piping layout, air interconnecting Piping, anti-icing & anti-surge air interconnecting piping & supports, miniskirt cross piping & supports, Pipe and cable tranches layout
• Machinery baseplate frames & piping, inlet plenum drains piping for GT, piping full supply, plant interconnecting piping & support
• General arrangement for water injection skid, purge air skid, oil mist separation skid, hydraulic starting skid, synthetic oil console, fuel gas treatment skid
• Oil purifier outline, mineral lube oil skid outline, cooling water skid outline, hydraulic starting console
• Piping thermal stress calculation, baseplate calculation report, machinery foundation calculation
• Piping lines specifications, main skid weighting specification, fuel gas shut-off and vent valve skid specification, mineral oil console full supply, plant manual valves,
• Machinery baseplate, Machinery foundation bolts, walkways inside & outside enclosure, on base enclosure & specification, load gear enclosure,
• Package interfaces study, miniskirt general assembly dwg, mask for Machinery foundations
• Perform Technical Reviews. Review process- 30%-60%-90%. Handhold, guide & mentor the team to improve technical competency of the team
• Drive Knowledge Management, Continuous improvement & Productivity improvement initiatives.

Requirements• Experience in Gas Turbine – Designing in oil and gas/petrochemical/power sector.
• Should be able to read P&IDs , Customer Specification
• Should be able to provide support on preparation of Equipment Specification / Datasheets, Purchase Specification
• Tools skill: Siemens NX10, AutoCAD & Team Center
• Should be able to prepare Project Scheduling, monitoring, and control, and maintain OTD and Quality of the Engineering documents, timely execution.
• Bachelor’s degree in Mechanical Engineering.
• Experience in an engineering position for Auxiliary System Engineering - Mechanical for Turbomachinery’s Gas Turbine in oil and gas/power sector.

Specific Instructions for Applicants (Mandatory)
1. Resume size shall be less than 300 KB (word document Preferred)
2. Please include Photo In the resume
3. Please include the below details in the resume
• First name
• Last name
• Date of Birth
• Father's Name
• last 4 Digits of PAN Number

BenefitsYou will be working with a trusted global product engineering and lifecycle services partner to the world’s most recognized companies in the Aero Engines, Aerospace & Defense, Hi-Tech, Transportation (Auto and Rail), Power and Industrial, Oil & Gas, and Medical Devices industries. With 12K+ experts, and a global presence in 73 locations across 15 countries, it believes that it is at the forefront of the convergence of mechanical, electronics, software, and digital engineering innovations to enable solutions for a safer, cleaner world. A Strong Process based organization Certified for CMMI L5 and multiple other certifications of the process and one of the few organizations which are ranked as best place to work.

  • Auxiliary Design Packaging-gas Turbine

    4 days ago

    Bengaluru, India Excellence and Eminence LLP Full time

    We are looking for Auxiliary Design Packaging-Gas Turbine with 3-10 Years of Experience for our esteemed client for Bangalore Location **Roles and Responsibilities**: - Plot plan, Turbo-Group general arrangement, machinery foundation, machinery main purchaser mechanical connection. - Interconnecting piping layout, air interconnecting Piping, anti-icing &...

  • Auxiliary Design Packaging- Steam Turbine

    4 days ago

    Bengaluru, India Excellence and Eminence LLP Full time

    We are looking for Auxiliary Design Packaging - Steam Turbine Centrifugal Compressorwith 3-10 Years of Experience for our esteemed client for Bangalore Location **Key Skills**: NX10, AutoCAD & Team Center, P&IDs, Project Scheduling, monitoring, and control, and maintain OTD **Roles and Responsibilities**: - Plot plan footprint, compressor general...

  • Auxiliary Design Packaging Engineer-GasTurbine-Bangalore

    Found in: Talent IN C2 - 2 weeks ago

    Bengaluru, India Excellence and Eminence LLP Full time

    We are looking for AuxiliaryDesign/ Packaging EngineerGas TurbineBangalore with 3 to 15 Yrs ofExperience for our esteemed client for Bangalore Location.Key Skills:Ancillary system Skid Engineering Gas TurbineP&IDNote:Candidate shall be willing to work at customerlocation.This is an immediaterequirement. Please apply if you can join within 20 days or closeto...

  • System Engineer

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India Expertia ATS Full time

    Hello ,We are looking for experienced System Engineer - Gas Turbine to join our reputed MNC Client with direct payroll About a Job -A Gas Turbine System Engineering expert will be responsible for the Auxiliary System Engineering for Gas Turbine. He/ She will have the opportunity to introduce new technology to enhance company profitability and productivity....

  • Principal Mechanical Design Engineer

    Found in: Appcast Linkedin IN C2 - 3 weeks ago

    Bengaluru, India Quest Global Full time

    Principal Mechanical Design Engineer - Piping and Instrumentation Drawing (P&ID) - Gas Turbine / Steam Turbine / Centrifugal CompressorTechnical Manager : Experience : 12 - 18 YearsTechnical Lead : Experience : 6 - 12 YearsSystem Engineer : Experience : 4 - 8 Years56547BR - System Engineer - Gas Turbine56549BR - System Engineer - Reciprocating...

  • Principal Mechanical Design Engineer

    Found in: Talent IN 2A C2 - 3 weeks ago

    Bengaluru, India Quest Global Full time

    Principal Mechanical Design Engineer - Piping and Instrumentation Drawing (P&ID) - Gas Turbine / Steam Turbine / Centrifugal CompressorTechnical Manager : Experience : 12 - 18 YearsTechnical Lead : Experience : 6 - 12 YearsSystem Engineer : Experience : 4 - 8 Years56547BR - System Engineer - Gas Turbine56549BR - System Engineer - Reciprocating...

  • Principal Mechanical Design Engineer

    Found in: Whatjobs IN C2 - 3 weeks ago

    Bengaluru, India Quest Global Full time

    Principal Mechanical Design Engineer - Piping and Instrumentation Drawing (P&ID) - Gas Turbine / Steam Turbine / Centrifugal Compressor Technical Manager : Experience : 12 - 18 Years Technical Lead : Experience : 6 - 12 Years System Engineer : Experience : 4 - 8 Years 56547BR - System Engineer - Gas Turbine 56549BR - System Engineer - Reciprocating...

  • Auxiliary Design Packaging Designer- Steam TurbineCentrifugal Compressor

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India Excellence and Eminence LLP Full time

    We are looking for AuxiliaryDesign/ Packaging Designer Steam Turbine & CentrifugalCompressor with 3 to 15 Yrs of Experience for our esteemed clientfor Bangalore Location.Key Skills:Auxiliary Design/ Packaging Steam Turbine& CentrifugalCompressorNote:Candidate shall be willing to work at customerlocation.This is an immediaterequirement. Please apply if you...

  • System Engineer- Steam Turbine

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India Expertia ATS Full time

    Hello ,We are looking for experienced System Engineer to join our reputed MNC Client with direct payroll About a Job:-Roles & Responsibilities:A Steam Turbine & Centrifugal Compressor System Engineering expert will be responsible for the Auxiliary System Engineering for Steam Turbine & Centrifugal Compressor. He/ She will have the opportunity to introduce...

  • System Engineer

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India Expertia ATS Full time

    Hello ,We are looking for experienced System Engineer - Steam Turbine to join our reputed MNC Client with direct payroll About a Job -Roles & Responsibilities:A Steam Turbine & Centrifugal Compressor System Engineering expert will be responsible for the Auxiliary System Engineering for Steam Turbine & Centrifugal Compressor. He/ She will have the opportunity...

  • Package Engineer

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India ANISAN SOFT TECH SOLUTIONS Full time

    Educational Or Experience Requirements: M.E /B. E (Mechanical) with minimum 12 15 years of (Offshore Platform) experience in relevant discipline.Designation : Package Engineer (3 Open positions)Experience : 12 to 18 yearsScope of work : The Mechanical engineer responsibilities comprise Specifications, Technical Datasheets,Requisitions, TQ, TBA, VDR for...

  • Sr CAD Designer

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India Mitsubishi Power India Full time

    Job Title Sr.CAD Designer Electrical Location Bangalore Department Electrical Reporting to Respective HODs/ PICs Position Purpose Electrical Drafting and BOQ Estimation for AQCS projects Dimensions Good AutoCAD Drafting Knowledge in preparation of SLD, Electrical building GA dwg, Cable tray layout.Lighting Layout, Earthing layout for Industrial...

  • Sr. Tech. Prof.

    Found in: beBee jobs IN - 3 weeks ago

    Bengaluru, Karnataka, India KBR Full time

    Title:Sr. Tech. Prof. - Mech.Responsible for developing technical requirements, specification and selection of machinery, packaged Equipment, material handling and solids processing systems in compliance with codes and standards. Duties include preparation of datasheets, Specifications, Material Requisition, Evaluation of Technical Bid, Vendor document...

  • Engineer II

    Found in: Talent IN C2 - 7 days ago

    Bengaluru, India Raytheon Technologies Full time

    Unspecified Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.  Come ready to explore and you’ll find a place where your talent takes...

  • Technical Professional

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India KBR Full time

    Title: Technical Professional - Mechanical Responsible for developing technical requirements, specification andselection of machinery,packaged Equipment, material handling and solids processing systems in compliance with codes and standards. Duties include preparation of datasheets, Specifications, Material Requisition, Evaluation of Technical Bid, Vendor...

  • Sr. Tech. Prof.

    Found in: beBee jobs IN - 2 weeks ago

    Bengaluru, Karnataka, India KBR Full time

    Title:Sr. Tech. Prof. - Mech.Responsible for developing technical requirements, specification and selection of machinery, packaged Equipment, material handling and solids processing systems in compliance with codes and standards. Duties include preparation of datasheets, Specifications, Material Requisition, Evaluation of Technical Bid, Vendor document...

  • Technical Professional

    Found in: beBee jobs IN - 1 week ago

    Bengaluru, Karnataka, India KBR Full time

    Title:Technical Professional - MechanicalResponsible for developing technical requirements, specification and selection of machinery, packaged Equipment, material handling and solids processing systems in compliance with codes and standards. Duties include preparation of datasheets, Specifications, Material Requisition, Evaluation of Technical Bid, Vendor...

  • Instrumentation Design Technical Lead-Bangalore

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India Excellence and Eminence LLP Full time

    We are looking forInstrumentation Design Technical LeadBangalore with 3 to 15 Yrs ofExperience for our esteemed client for Bangalore Location.Key Skills:E & I Designing Turbomachinery s GasturbineNote:Candidate shall be willing to work at customerlocation.This is an immediaterequirement. Please apply if you can join within 20 days or closeto...

  • Design Engineer

    2 weeks ago

    Bengaluru / Bangalore, India Quess IT Staffing (Formerly known as Magna Infotech) Full time

    Key Responsibilities Responsibility of Sr Mechanical Design Engineer will include but not limited to − Cleanup 3D CAD model of gas turbine combustors and prepare CAD model for CFD analysis in Siemens NX. − Generate high quality CFD mesh and conduct high fidelity combustion CFD analysis using Ansys Fluent or Siemens Star-ccm+. − Postprocess CFD results...

  • Mechanical Rotary Design Engineer

    Found in: Talent IN C2 - 3 weeks ago

    Bengaluru, India PepalTree Enterprise Pvt Ltd. Full time

    Hi,We have immediate openings for "Mechanical Rotary Design Engineers" for our Client Tech Mahindra.PFB, the JD of this opening.Nature of Employment : Permanent position.Job Location : Bangalore.Qualification: Bachelor's Degree.Experience : 4-15 years.Position : Mechanical Rotary Design EngineerSkills : Design of Rotary equipments like Pumps / Compressors...