CNC Bending Operator

2 weeks ago

Peenya Bengaluru Karnataka, India ADVISEBEE INNOVATIONS PRIVATE LIMITED Full time

1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
- 2) Positions and clamps end stops on machine to set specified location of bend.
- 3) Inserts or screws plug stops into guide wheel to set specified degree of bend.
- 4) Positions workpiece against end stop.
- 5) Locks holding clamp and guide clamp onto workpiece.
- 6) Lubricates workpiece with oil.
- 7) Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
- 8) May slide mandrel into tubing instead of using guide clamp.
- 9) May preheat workpiece, using hand torch or heating furnace.
- 10) May use hand-powered bending machine for short runs
- 11) May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.
- 12) May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator I; Tube-Bending-Machine Operator I.

Pay: ₹18,000.00 - ₹25,000.00 per month

Work Location: In person

  • CNC Bending Machine Operator

    2 weeks ago

    Bengaluru, Karnataka, India Thanu Associates Full time

    **ob Description** Set up and calibrate bending machines (CNC, hydraulic, or manual) as per job requirements. Select appropriate tools, dies, and materials based on production specifications. Load raw materials (such as metal sheets, tubes, or rods) into the machine. Operate the bending machine to form parts according to blueprints and technical...

  • CNC Bending Machine Operator

    7 days ago

    Sunkadakatte, Bengaluru, Karnataka, India Presstonic Engineering limited Unit -2 Full time

    **Job Title**: CNC Bending Machine Operator **Location**: Bangalore **Department**: Production / Fabrication **Reports To**: Production Manager **Employment Type**: Full-time **Job Summary**: **Key Responsibilities**: - Set up and operate CNC bending/press brake machines to bend metal parts per blueprints or technical drawings. - Select proper tools,...

  • Bending-machine Operator

    2 days ago

    Peenya, Bengaluru, Karnataka, India Aries Precision Technology Full time

    **Job description** Since 2006, APT has been a trusted supplier of sheet metal products across industries like panel builders, construction equipment manufacturers, modular furniture industry, Food industry and Automotive Industries. APT is reputed for its high quality, precision and delivery record. We are looking for a skilled **Bending Machine...

  • CNC Machine Operator

    7 days ago

    Nelamangala, Bengaluru, Karnataka, India SVK Consultants Full time

    CNC AMADA BENDING OPERATOR. ROTATION SHIFT. Pay: ₹18,000.00 - ₹22,000.00 per month **Benefits**: - Provident Fund Schedule: - Day shift Supplemental pay types: - Yearly bonus **Education**: - Bachelor's (preferred) **Experience**: - CNC Programming: 3 years (preferred) - total work: 3 years (preferred) Shift availability: - Night Shift...

  • CNC Operator

    7 days ago

    Bengaluru, Karnataka, India People Spectrum Full time

    CNC Bending Operator - AMADA Bending Machine. Pay: ₹14,086.00 - ₹18,208.75 per month **Benefits**: - Provident Fund Schedule: - Day shift - Rotational shift Supplemental pay types: - Shift allowance - Yearly bonus Ability to commute/relocate: - Bengaluru, Karnataka: Reliably commute or planning to relocate before starting work...

  • Bending Machine Operators

    1 week ago

    Bengaluru, Karnataka, India ShobhaGlobs Engineers Hub Pvt. Ltd Full time

    Job Description: Bending Machine Operator**Roles and Responsibilities** - **Machine Setup and Operation**: - Set up and operate bending machines, including CNC and manual machines, to bend and shape materials like sheet metal, tubes, and bars according to specifications. - Select and install appropriate tools, dies, and machine settings for each job. -...

  • CNC Cutting& Bending Machine Operator's

    2 weeks ago

    Gottigere, Bengaluru, Karnataka, India SRE KATEEL INDUSTRIES Full time

    CNC cutting& Bending machine operator's job responsibilities include: - **Operating the machine**: Setting up, loading programs, and operating the machine to cut materials * - **Preparing materials**: Preparing raw materials, laying out parts, and assembling final products * - **Maintaining equipment**: Performing preventative maintenance, monitoring the...

  • CNC Operator

    7 days ago

    Peenya, Bengaluru, Karnataka, India Novelworx Digital Solutions Pvt Ltd Full time

    Require 0 to 1 year of experience in CNC Machines - Experience in operating CNC machines **Job Types**: Full-time, Permanent Pay: ₹15,000.00 - ₹20,000.00 per month **Benefits**: - Health insurance - Provident Fund Schedule: - Day shift - Morning shift Supplemental Pay: - Performance bonus - Yearly bonus **Education**: - Diploma...

  • CNC Operator

    2 weeks ago

    Magadi Road, Bengaluru, Karnataka, India A-Z Virtual Full time

    A leading Manufacturing Industry in Bangalore is looking for Position - CNC Bending Experience - 2 to 10yrs Salary - 20000-40000 Education - **Dip/ITI (Mechanical) only** Pay: ₹20,000.00 - ₹40,000.00 per month **Benefits**: - Health insurance - Provident Fund Schedule: - Day shift - Evening shift - Morning shift Supplemental Pay: - Performance...

  • CNC Operator

    1 week ago

    Peenya, Bengaluru, Karnataka, India PROTECH ENGINEERS Full time

    Required CNC Operator in and around peenya. Qualification - ITI / Diploma / SSLC. **Job Types**: Full-time, Permanent, Fresher **Salary**: ₹10,000.00 - ₹17,000.00 per month **Benefits**: - Health insurance Schedule: - Rotational shift Supplemental pay types: - Overtime pay **Education**: - Secondary(10th Pass) (preferred) **Experience**: -...