Senior Design Engineer – Closures
7 months ago
- To control and conceive of in-house or sub-contracted parts of the boundary defined by the project by respecting the objectives of planning, services, mass, cost and quality, while conceiving and by animating the team of designers, and by leading the actions necessary to convergence
- New concept generation and evaluation on the basis of available inputs w.r.t vehicle architecture and other interfaces/boundaries
- Prepare SOR (Statement of requirement) for bought out/supplier parts
- To control and animate the convergence of delegated interfaces in the authorities envisaged such as the projects meetings and design pilot meetings with the responsibility to reporting on convergence progress and to alert on the hard points.
- To carry out with the assistance of the design team under operational piloting technical constructions within project boundary and to converge them with peripheral systems.
- To guaranty convergence produces/process of the internal parts in relation to profession engineer or project manager.
- To carry out the synthesis robustness for the technical reviews while making sure of the taking into account of technical repositories of the profession and the check lists as of the numeric style definition and by carrying out analyses of proximities via DMU module on the whole of the faces.
- Evolve, in pre-development to the hand over phase of Body Closures components/systems for what concern technical solutions and corresponding performance, timing and cost targets (using the appropriate systems).
- Exposure to Work from Styling phase until TKO phase
- To ensure during all project development, the technical feasibility, the design robustness, the component manufacturability and the compliance of technical documentation, through the coordination of engineering (if necessary) and product suppliers. To point out the critical issues or any infringements of Design/Test Standards and identify the actions needed to respect the assigned targets.
- To manage, together with Design team, the design/installation DFMEAs execution performing the risk assessment and to provide support during execution
- To make available the documentation necessary to implement engineering changes (ECNs), to request their economical evaluations, to support the PR during the approval phase and to guarantee the associated drawings release.
- To ensure the tooling release process.
- To carry out the diagnostic activities on the relevant systems/components.
- To guaranty the quality of the transfer at the end of the project on the phase of development (after TKO) of the files controlled for sending to the pre-project service in industrial phase.
- Design, development of Body closure products – Doors, Hood, Fender
- Should be able to design and develop the master section, concept detailing independently.
- Candidate should have executed at least couple of related engineering projects throughout the product lifecycle.
- Creation and modification of CAD models and drawings in required CAD software
- To provide design solutions for sheet metal parts and provide design services in these areas.
- To ensure QCD targets are met and there is agreement on technical style within scope.
- To lead and steer the part development processes with suppliers and within the development teams.
- To ensure product, processes, and services consistency within work environment by defining part acceptance criteria.
- To create design documentation required in development processes as per standards.
Educational Qualification:B.E., in Mechanical or Production or Industrial Engineering (college of technology / university OR Post Diploma / Diploma in Mechanical or Production or Industrial Engineering (college of technology / university
No. of years of work experience - 4 to 6 Years
Critical Skill Sets (Technical):
- Good knowledge in CATIA V5 or V6
- Experience & working knowledge on PLM Tools. Preferable experience in ENOVIA PLM – 3D Experience.
- Exposure to automotive engineering and design.
- Excellent communication and interpersonal skills
- Team orientation and willingness to learn new skills
- Manufacturing or launch experience
- Knowledge of materials and processes specific to Closures – Doors, Hood, Fender
About SA Technologies Inc:
SA Technologies specializes in offering IT consulting and Development solutions for our global customers. From 20 years we have been helping our customers achieve operational excellence and compliance on the cloud. Our expertise lies in delivering quality services, cross-platform skills & supporting you to achieve operational excellence & empower you to become a technology-driven enterprise.We are Microsoft Gold Partner, Google Partner, and Great Place to work certified company.
-
Pune, Maharashtra, India SA Technologies Inc Full timeAbout the JobWe are seeking a highly skilled Senior Design Engineer to join our team at SA Technologies Inc. in the field of automotive closure systems.
-
Senior Design Engineer
7 days ago
Pune, Maharashtra, India SA Technologies Inc Full timeAbout the RoleWe are seeking an experienced Senior Design Engineer - Closure Specialist to join our team at SA Technologies Inc. This is a unique opportunity for a skilled professional to take on a challenging role and make a significant impact on our organization.Key Responsibilities:Product Development: Lead the design and development of Body closure...
-
Design Engineer – Closures
7 months ago
Pune, India SA Technologies Inc Full timeDesign Engineer – Closures (Doors, Hood, Fender)Key Performance Indicators:-Check adequacy of input data and identify the constraints for project planning.Create or modify 3D model taking into account the environment of design, guarantee rules of design / consultation / validation by partners.Ensure robustness by taking of account constraints of...
-
Design Engineer – Closures
7 months ago
Pune, India SA Technologies Inc Full timeDesign Engineer – Closures (Doors, Hood, Fender)Key Performance Indicators:-Check adequacy of input data and identify the constraints for project planning.Create or modify 3D model taking into account the environment of design, guarantee rules of design / consultation / validation by partners.Ensure robustness by taking of account constraints of...
-
Automotive Design Engineer
3 weeks ago
Pune, Maharashtra, India SA Technologies Inc Full timeAbout the RoleWe are seeking an experienced Automotive Design Engineer to join our team as a Body Closures Specialist. In this role, you will be responsible for designing and developing body closure products such as doors, hoods, and fenders.Key ResponsibilitiesCreate or modify 3D models taking into account design constraints, guaranteeing rules of design,...
-
Senior Design Engineer – Closures
7 months ago
Pune, India SA Technologies Inc Full timeKey Performance Indicators:To control and conceive of in-house or sub-contracted parts of the boundary defined by the project by respecting the objectives of planning, services, mass, cost and quality, while conceiving and by animating the team of designers, and by leading the actions necessary to convergenceNew concept generation and evaluation on the basis...
-
Senior Physical Design Lead
4 weeks ago
Pune, Maharashtra, India Cadence Design Systems, Inc. Full timeCadence Design Systems, Inc.Estimated Salary: $150,000 - $200,000 per yearAbout UsWe are a leading technology company that provides electronic design automation (EDA) software and services to help our customers create complex integrated circuits.Job DescriptionWe are seeking an experienced Senior Physical Design Lead to join our team. As a key member of our...
-
Pune, Maharashtra, India SA Technologies Inc Full timeAbout the RoleWe are seeking an experienced Lead Automotive Engineer to join our team at SA Technologies Inc. As a key member of our engineering department, you will be responsible for leading the development of body closures products, including doors, hoods, and fenders.Job SummaryLeverage your expertise in automotive engineering and design to drive...
-
Design Engine
6 months ago
Pune, Maharashtra, India Tata Technologies Full timeFunction Name: Design Engineer -Closure Door Trims Experience: 3 -8 years Industry - Automobile **Scope of Role**: - Technical lead is responsible to within the area of Door Trim product development and details of product design according to standards and guidelines. - Translate defined product design performance criteria in CAD data & specifications. -...
-
Lead Automotive Engineer
3 weeks ago
Pune, Maharashtra, India SA Technologies Inc Full timeAbout the Role:SA Technologies Inc is seeking a highly skilled Lead Automotive Engineer to join our team. As a key member of our engineering department, you will be responsible for designing and developing body closure products, including doors, hoods, and fenders.About You:We are looking for an experienced engineer with a strong background in automotive...
-
Design Engineer
3 months ago
pune, India Cadence Design Systems Full timePosition Description: Exp: 7-12 Yrs · Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure. · The candidate will have the opportunity to work on many varieties of...
-
Module Leader
7 months ago
Pune, India Tata Motors Full timePosition Summary with Job Responsibilities To lead CFT across the organisation (Vehicle Module Team) to develop the closure and CAB Mechanisms for the projects as per the QCT Targets. Role will start at DR0 for the project and continue upto SOP+90 days. Module delivery for Quality, Cost and Timeline for the project is owned by CFT Lead by Module...
-
Senior ASIC Physical Design Engineer
3 weeks ago
Pune, Maharashtra, India Lattice Semiconductor Full timeJob SummaryWe are seeking a highly skilled Senior ASIC Physical Design Engineer to join our team at Lattice Semiconductor in Pune, India. The successful candidate will be responsible for driving physical design closure of key ASIC blocks and full chip, developing best-in-class methodologies to achieve best power, performance, and area.The ideal candidate...
-
Principal Design Engineer(Physical Design)
7 months ago
Pune, India Cadence Design Systems Full timePosition Description:Exp: 7-12 Yrs· Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure.· The candidate will have the opportunity to work on many varieties of challenging...
-
Principal Design Engineer(Physical Design)
7 months ago
pune, India Cadence Design Systems Full timePosition Description:Exp: 7-12 Yrs· Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure.· The candidate will have the opportunity to work on many varieties of challenging...
-
Principal design engineer(physical design)
1 month ago
Pune, India Cadence Design Systems Full timePosition Description:Exp: 7-12 Yrs· Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure.· The candidate will have the opportunity to work on many varieties of challenging...
-
Principal Design Engineer(Physical Design)
3 months ago
pune, India Cadence Design Systems Full timePosition Description: Exp: 7-12 Yrs · Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure.· The candidate will have the opportunity to work on many varieties of...
-
Principal Design Engineer(Physical Design)
7 months ago
Pune, India Cadence Design Systems Full timePosition Description: Exp: 7-12 Yrs · Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure.· The candidate will have the opportunity to work on many varieties of...
-
Principal Design Engineer(Physical Design)
7 months ago
Pune, India Cadence Design Systems Full timePosition Description: Exp: 7-12 Yrs · Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure. · The candidate will have the opportunity to work on many varieties of...
-
Principal Design Engineer(Physical Design)
7 months ago
Pune, India Cadence Design Systems Full timePosition Description: Exp: 7-12 Yrs · Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure.· The candidate will have the opportunity to work on many varieties of...
