CAE Engineer

3 weeks ago

Pune, India Expert Global Group Full time

Hello All,


We are hiring for the position of CAE Engineer with MNC for Pune location.


Education Qualification: M-Tech/ ME (Mechanical Engg)/ B.E (Mechanical Engg)


Job description:

Responsible for handling all types Static Structural Analysis, Linear, Non linear, Modal , Harmonic, Fatigue, Durability, Thermal Analysis

Identify potential critical challenges and failure modes – including collaborating with other engineering teams to identify risks.

Understand the project scope and able to calculate the loads & constraints and perform the FEA

Make recommendations to the design to improve their functional performance and reliability.

Work with test engineers to develop/conduct FEA simulations to verify appropriateness of test methods.

Prepare technical CAE reports of results.


Desired Skills

Excellent understanding of solid mechanics and structural finite element analysis (FEA)

Hands on Experience with Altair Hyperworks/ Hypermesh, Optinstruct & Radioss / Nastran CAE software

Ansys Workbench CAE tool experience would get advantage

Ability to differentiate and utilize both system and subsystem analysis techniques to evaluate complex interactions.

Ability to define DOEs and analyzes the influence of design parameters to optimize the product design for a given application

Similar Off highway industry candidate would be preferable

Candidate should have good communication skills


If you are interested in this opportunity, kindly revert with your updated resume on below email id; suvarnat@expertgs.com

  • Cae Engineer

    1 week ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safety Education :BE/B.tech/ME/M.tech Experience :6-10 Years Loc : Pune Job Requirements: · Creation of CAE Models [System level / BIW / Full Vehicle] · Able to model/debug passenger car full vehicle structural models using Primer. · Able to set up and simulate frontal, side, and rear impact models. · Able to run CAE...

  • Cae Engineer

    3 days ago

    Pune, India Expert Global Group Full time

    Hello All, We are hiring for the position of CAE Engineer with MNC for Pune location. Education Qualification : M-Tech/ ME (Mechanical Engg)/ B.E (Mechanical Engg) Job description: Responsible for handling all types Static Structural Analysis, Linear, Non linear, Modal , Harmonic, Fatigue, Durability, Thermal Analysis Identify potential critical...

  • Engineer-CAE

    2 weeks ago

    Pune, India KION Group Full time

    Engineer-CAE What we offer: We are looking for a motivated and experienced CAE Engineer to support us in the execution of CAE tasks from all KION R&D locations.  As a local team leader for CAE you will be responsible for the on time and on budget execution of CAE tasks (meshing, modeling, simulation jobs…) acc. to the defined quality standards...

  • Engineer-CAE

    2 weeks ago

    pune, India KION Group Full time

    Engineer-CAE What we offer: We are looking for a motivated and experienced CAE Engineer to support us in theexecution of CAE tasks from all KION R&D locations. As a local team leader for CAE you will be responsible for the on time and on budgetexecution of CAE tasks (meshing, modeling, simulation jobs…) acc. to the definedquality standards...

  • Cae Engineer

    1 week ago

    Pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating) Education :BE/B.tech/ME/M.tech Experience :6-10 Years Job Requirements: · Creation of Seating CAE Models [Row1, Row2, etc] · Able to mesh the seat parts as per the relevant meshing standards using Hypermesh. · Able to build seat models using proper connections methodology using Hypermesh, Primer. · Able to debug...

  • CAE Engineer

    3 weeks ago

    Pune, India Expert Global Group Full time

    Hello All,We are hiring for the position of CAE Engineer with MNC for Pune location.Education Qualification: M-Tech/ ME (Mechanical Engg)/ B.E (Mechanical Engg)Job description:Responsible for handling all types Static Structural Analysis, Linear, Non linear, Modal , Harmonic, Fatigue, Durability, Thermal Analysis Identify potential critical challenges and...

  • Senior CAE Engineer

    3 weeks ago

    pune, India Faurecia Full time

    Job Description Overall responsibilities and duties:o Perform engineering assignments as part of design/ project team for various projects assigned, following and applying the systems and standards set by FTCI and customers under the guidance of CAE leader.o Uses appropriate softwares to do the analysis that meet engineering specifications. o To...

  • Senior CAE Engineer

    2 months ago

    Pune, India Faurecia Full time

    Job Description Overall responsibilities and duties: o Perform engineering assignments as part of design/ project team for various projects assigned, following and applying the systems and standards set by FTCI and customers under the guidance of CAE leader. o Uses appropriate softwares to do the analysis that meet engineering specifications. o To...

  • Cae Engineer

    1 week ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-CFD Education :BE/B.tech/ME/M.tech Experience :2-6 Years Loc: Pune Tools : Mandatory: Star CCM+; Good to have: (space claim) Key skill: Knowledge of fluid dynamics and heat transfer, Automotive Exhaust system CFD, Conjugate Heat Transfer (CHT) CFD, Multiphase urea injection CFD

  • CAE Engineer-Crash

    1 month ago

    pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safetyEducation :BE/B.tech/ME/M.techExperience :6-10 YearsLoc : PuneJob Requirements:· Creation of CAE Models (System level / BIW / Full Vehicle)· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full...

  • CAE Engineer-Crash

    1 month ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safety Education :BE/B.tech/ME/M.techExperience :6-10 YearsLoc: PuneJob Requirements:· Creation of CAE Models [System level / BIW / Full Vehicle]· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full...

  • CAE Engineer-Crash

    1 month ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safety Education :BE/B.tech/ME/M.techExperience :6-10 YearsLoc: PuneJob Requirements:· Creation of CAE Models [System level / BIW / Full Vehicle]· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full...

  • CAE Engineer-Crash

    1 month ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safety Education :BE/B.tech/ME/M.tech Experience :6-10 Years Loc : Pune Job Requirements: · Creation of CAE Models (System level / BIW / Full Vehicle) · Able to model/debug passenger car full vehicle structural models using Primer. · Able to set up and simulate frontal, side, and rear impact models. · Able to run CAE...

  • CAE Engineer-Durability

    2 months ago

    Pune, India Tata Technologies Full time

    ·Concept models of advanced Body in White (BIW) structures and Finite Element (FE) mesh for CAE assessment Experience in CAE analysis of vehicle sub systems ·Knowledge of automotive materials and materials science, including steel, aluminum, composites Understanding of structural theory and properties of thin-walled sections ·Able to manage multiple...

  • CAE Engineer-Crash(Seating)

    1 month ago

    pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating)Education :BE/B.tech/ME/M.techExperience :6-10 YearsJob Requirements:· Creation of Seating CAE Models (Row1, Row2, etc)· Able to mesh the seat parts as per the relevant meshing standards using Hypermesh.· Able to build seat models using proper connections methodology using Hypermesh, Primer.· Able to debug seat...

  • CAE Engineer-CFD

    1 month ago

    pune, India Tata Technologies Full time

    Designation :CAE Engineer-CFDEducation :BE/B.tech/ME/M.techExperience :2-6 YearsLoc: PuneTools : Mandatory: Star CCM+; Good to have: (space claim)Key skill: Knowledge of fluid dynamics and heat transfer, Automotive Exhaust system CFD, Conjugate Heat Transfer (CHT) CFD, Multiphase urea injection CFD

  • CAE Engineer-Crash(Seating)

    1 month ago

    Pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating)Education :BE/B.tech/ME/M.techExperience :6-10 YearsJob Requirements:· Creation of Seating CAE Models [Row1, Row2, etc]· Able to mesh the seat parts as per the relevant meshing standards using Hypermesh.· Able to build seat models using proper connections methodology using Hypermesh, Primer.· Able to debug seat...

  • CAE Engineer-Crash(Seating)

    1 month ago

    Pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating)Education :BE/B.tech/ME/M.techExperience :6-10 YearsJob Requirements:· Creation of Seating CAE Models [Row1, Row2, etc]· Able to mesh the seat parts as per the relevant meshing standards using Hypermesh.· Able to build seat models using proper connections methodology using Hypermesh, Primer.· Able to debug seat...

  • CAE Engineer-Crash(Seating)

    1 month ago

    Pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating) Education :BE/B.tech/ME/M.tech Experience :6-10 Years Job Requirements: · Creation of Seating CAE Models (Row1, Row2, etc) · Able to mesh the seat parts as per the relevant meshing standards using Hypermesh. · Able to build seat models using proper connections methodology using Hypermesh, Primer. · Able to debug...

  • Team Leader CAE

    2 weeks ago

    Pune, India KION Group Full time

    Description  We are looking for a motivated and experienced CAE Engineer to support us in the execution of CAE tasks from all KION R&D locations.  As a local team leader for CAE you will be responsible for the on time and on budget execution of CAE tasks (meshing, modeling, simulation jobs…) acc. to the defined quality standards and with the...