Shift Superintendent

NEC Power Block

TEMPLATE

POSITION : SHIFT SUPERINDENT (MRS)

KEY ROLE :

1. Overall in-charge of operation in shifts
2. Responsible for Power System operation. Achieving highest reliability of power system in addition to meet with required parameters & quality.
3. Responsible for power distribution and clearance to down stream units / sub stations.
4. Responsible for safe energization and shut down of equipment
5. Responsible for safe & reliable operation of EHV & HV system as per laid down procedures and TAL (Technical Authority Limit)
6. Supervise the jobs related to all equipment, monitor & ensure their performance for reliable, optimum & safe operation.
7. Responsible for handling plant emergencies.
8. Prepare, handover and co-ordinate the maintenance activities.
9. Responsible for carrying out field/panel activities related to plant / equipment safe energization & shut down, synchronisation & de-synchronisation with grid/ other Power network.
10. Ensure strict compliance of all HSEF procedures
11. Co-ordinations with JMD Generating stations & CTU Control Room
12. To ensure 220kV & 33kV Power Distribution system and equipment operation with in SOC

FUNCTIONS :

1. To operate the power system with highest reliability.
2. synchronising operation with other Power System / Grid power as per requirement. (Operation of 220kV GIS switch gear)
3. To act in consultation with Production manager / SS of CTU for power system reliability
4. Service transformers OLTC operation to maintain grid p.f. and voltage.
5. To understand and raise bypass request of trip and interlocks as per procedures and maintain record.
6. To associate in analysis of Power distribution failures with other Dept. and correlate the analysis with operating parameters
7. Important power system study reports reviews accordingly Plant operation monitoring w.r.t. critical parameters. (Load flow, Short circuit, Power system protection setting report).
8. To observe trends of important parameters & to take corrective actions for the deviations to maintain the quality & reliability.
9. To monitor working on SCADA panel, F & G panel, Manual synchronizing panel, disturbance recorder etc. and control all parameters.
10. To monitor record of bypass of trip and interlocks as per procedures.
11. To ensure minimum downtime of power system & all electrical equipment.

KNOWLEDGE :

UNIT OPERATION

1. 220kV & 33kV GIS (Gas insulated switchgear)
2. SCADA/EDMS
3. 220kV / 33kV transformers with OLTC
4. Knowledge of 220kV & 33kV UG cablek network

SAFETY

1. General Safety Rules
2. Work permits procedures.
3. Use of fire fighting & safety equipments.
4. Fire, smoke, gas detection system
5. Emergency procedures on site and off site
6. Fire Causes and their control
7. Planning for emergencies
8. First Aid Training
9. Overview of Safety management system
10. Job Safety Analysis
11. Pre Start Up Safety Reviews(PSSR)
12. Electrical safety including static Electricity
13. HSE statutory Rules and Regulations
14. Understanding your Health Card
15. Hazards in operation & Hazards Analysis (HAZOP & HAZAN)
16. Factories Act-Rules-Applicability & Implication
17. Process Safety management (PSM)
18. Operating Management System (OMS)
19. Safety Observations (ReSOP)

TECHNICAL

1. Operation of Power distribution system for the complete plant along with single line diagram.
2. Working of EHV switchgears (400kV/220kV/33kV) GIS, Transformers etc.
3. Downstream plants power distribution & consumption pattern along with location of specific Load Centers.
4. Electrical operation of the power system including Transformer & GIS energization, synchronization with other Power entity, shut down & isolation.
5. Emergencies in plant arising out of tripping / failure of equipments / systems including load shedding & fire.
6. Power distribution plan to downstream plants & execution of the same.
7. Alarm, trip points & circuit interlocks testing procedures.
8. Protection relay functions, their settings, data viewing & checking procedures.
9. Electrical SOP of equipments pertaining to start up, shutdown, change over & isolation.
10. Unit operations & process employed in different area of Power Complex.
11. Knowledge of SCADA/EDMS, its different functions & network configuration, controller description & their in-built logics such as OLTC operation etc required for operation including all types of HT / AC motors / synch. motors, dc machines, power & distribution transformers, instrument transformers, HT panel, various circuit breakers & isolators, UPS, battery chargers & battery system, control, process- instrumentation interlock & protection of all above equipment. Set points and details of protective system.
12. Control & Protection logic of GIS & Transformers. Circuit diagram of various control circuits.
13. Testing / trouble shooting / maintenance of the above electrical equipment.
14. Emergency power system operation.
15. Logic / circuit diagrams, trouble shooting & failure analysis.
16. Cable, joints and termination.
17. Statutory bodies, rules viz. Indian electricity rules. Electrical equipment for hazardous areas.
18. Coordination during switch gear shutdown
19. Alarm, trip points & circuit interlocks & testing procedures.
20. Protection relay functions, their settings, data viewing & checking procedures.
21. OLTC operation to maintain grid p.f. and voltage.
22. Coordination & supervision during EHV & HV switch gear Operation & shutdown

CROSS FUNCTIONAL

1. Control supply (UPS, DC, AC and other specific) to instrument system like F&G, HVAC etc.
2. To trouble shoot signal interface between instrument systems and electrical system.
3. Participate in loop testing / checking.
4. Critical equipment and their impact on the system.
5. Ability to understand P & IDs & PFDs.
6. Understand interlocks & protection systems from process side.
7. UPS distribution, effect of UPS failure on inst. & process

SKILLS :

1. Communications (Verbal / written)
2. Basics of Problem Solving Skills
3. Basic Skills for working in Team.
4. Basic man management skills.
5. Creativity and Innovation skills
6. Goals and Priority setting skills
7. Decision making Skills
8. Time Management Skills
9. Emotional Intelligence Skills
10. Conflict Management Skills

ATTRIBUTES :

1. Integrity
2. Achievement motivation
3. Self discipline
4. Team spirit
5. Trust
6. Dependability
7. Industriousness
8. Punctual, regularity
9. Reflex, quick response
10. Endurance
11. Understanding, grasping & learning capabilities

INTERFACING :

1. With CTU Control Room.
2. With downstream plants / Load centers.
3. With Maintenance dept.
4. With CTU SS, Executives, SFE, SCADA PO in field.
5. With CES/CTS

SPECIAL TOOLS : MS Office, IP 21, SAP, MS Project,

Software Specific to his functions

Page 1 of 4