Fatigue and Damage Tolerance Lead Engineer

5 days ago

Bengaluru, Karnataka, India Expleo Group Full time ₹ 20,00,000 - ₹ 25,00,000 per year

Overview:

This position is for Fatigue and Damage Tolerance Lead Engineer

Responsibilities:

  • Establishing (with Head of Function where appropriate) the engineering plan of tasks necessary to properly discharge the project requirements including any derived requirements.
  • The configuration control to secure a baseline and any consequent change management of the engineering baseline.
  • Optimising the achievement of engineering requirements.
  • Recording engineering justifications in support of project requirements.
  • Technical risk assessment.
  • During a project initiation phase, setting up checklists compliant to customer and internal requirement. During the life of the project, maintaining the checklists to take into account any evolution of requirement and conclusion of continuous improvement analyses.
  • Managing work performed to meet contract/order and regulatory requirements including engineering reviews performed by or on behalf of the Chief Engineer. Where appropriate, ensuring that "experts" outside of the project team who can contribute to the design review are invited to attend.
  • In the event that conflicts should arise between operational requirements and exercising of technical governance, the matter shall be referred through the Technical Governance route to the responsible Chief Engineer.
  • Ensuring the correct level of procedures have been adhered to:
  • In the generation of analyses, design schemes, drawings.
  • In the carrying out of engineering tasks
  • By ensuring that suitably authorised and qualified personnel are employed on the project
  • Ensuring that the necessary corrective actions are implemented to checked deliverables prior to authorisation and issue.
  • Recommending training and contributing to appraisals of junior and graduate engineers.
  • Is in possession of or working towards delegated signatory.

Qualifications:

BTech/MTech

Essential skills:

  • Knowledge of aircraft Fuselage and wing structure and aircraft loads
  • Experienced in spectrum generation and Kt Calculation
  • Good in Fatigue and Damage Tolerance (F&DT) calculations of Airbus aircrafts (fuselage section)
  • Well versed in ISAMI modules (including crack models, joint models) and ISAMI template preparation
  • Should have Fatigue and Damage Tolerance experience related to Single Aisle, Long Range and A350 programs
  • F&DT Analysis of Junctions, notches, unfolding radius, lugs & pins
  • Sizing and stress analysis of the Fuselage and Wing Structure and interfaces by means of hand calculations, numerical simulations (FEM)
  • Experience in numerical modeling, post-processing and reporting of the results
  • Very well-versed in stress dossier writing
  • Good in excel macros
  • Knowledge of Airbus processes and procedures
  • Expertise in the below tools is required
  • ISAMI
  • Hyperview (post processing knowledge)
  • Catia V5, PASS SSI (Basic Knowledge)
  • Nastran/Patran
  • Microsoft Office
  • Airbus Supply

Desired skills:

  • Visual basic and or python programming knowledge.
  • Automation of repeatable tasks / processes.
  • Experience in initial Design Stress (Static, FDT and FEM) tasks of Aircraft Structures.

Experience:

8 to 12 years

  • Fatigue and Damage Tolerance Engineer

    2 days ago

    Bengaluru, Karnataka, India Capgemini Full time ₹ 8,00,000 - ₹ 24,00,000 per year

    Fatigue & Damage Tolerance Engineer Location: Bangalore Experience: 4-6 yearsYour Role As an F&DT Engineer, you will be responsible for performing fatigue and damage tolerance analysis on aircraft structures. Youll work with advanced simulation tools and collaborate with cross-functional teams to ensure the safety and reliability of primary and secondary...

  • Fatigue & Damage Tolerance Engineer

    7 days ago

    Bengaluru, Karnataka, India Capgemini Full time ₹ 8,00,000 - ₹ 24,00,000 per year

    At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world's most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and...

  • Fatigue & Damage Tolerance Engineer

    7 days ago

    Bengaluru, Karnataka, India Capgemini Engineering Full time ₹ 8,00,000 - ₹ 12,00,000 per year

    At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world's most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and...

  • Fatigue and Damage Tolerance Engineer

    4 days ago

    Bengaluru, Karnataka, India Expleo Group Full time ₹ 1,04,000 - ₹ 1,30,878 per year

    Overview:This Job is for Fatigue and Damage tolerance EngineerResponsibilities:The translation of customer specifications into engineering solutions including the identification and mitigation of technical risk.The production of engineering calculations that are necessary to support any conceptual or detail engineering solution for which they are...

  • Fatigue and Damage Tolerance Specialist

    4 days ago

    Bengaluru, Karnataka, India Expleo Group Full time ₹ 12,00,000 - ₹ 36,00,000 per year

    Overview:This position is for Fatigue and Damage Tolerance SpecialistResponsibilities:Addressing increasingly complex technical engineering tasks without the need for supervision.Providing solutions by advanced computing/database/CAD/FE or other skills required by projects and showing increasing evidence of using company and client high-level...

  • Fatigue and Damage Tolerance Engineer Aerospace Structures

    1 week ago

    Bengaluru, Karnataka, India Astrica Technologies Full time ₹ 8,33,333 - ₹ 25,00,000 per year

    •Proficiency in tools like NASGRO, FRANC3D, MSC Fatigue, NASTRAN/PATRAN, Hyper Mesh.•Strong understanding of fatigue phenomena, fracture mechanics, and regulatory compliance. Specializing in rotary-wing aircraft. FAR/CS 25.571, 29.571, MIL-STD-1530)

  • Fatigue & Damage Tolerance

    4 days ago

    Bengaluru, Karnataka, India Capgemini Full time ₹ 9,00,000 - ₹ 12,00,000 per year

    JD,• 1D, 2D, 3D Modleing using Hypermesh• Linear, non-linear(primary), Thermal, Hand calculation• Knowledge on FEA & expertise in primary & Secondary structures of Aircraft.• ISAMI experience• Linear, non-linear(primary), Thermal - Nastran & Abaqus• Good Communication and ability to think and propose solutions.• Tools: ISAMI, Patran, Hypermesh,...

  • Stress engineer

    3 weeks ago

    Bengaluru, Karnataka, India AXISCADES Full time

    Company Profile: AXISCADES is a leading, end to end engineering solutions and product company. We bring expertise that caters to the digital, engineering, and smart manufacturing needs of large enterprises. With decades of experience in creating innovative, sustainable, and safer products worldwide, AXISCADES delivers business value across the entire...

  • Bogie Design Lead Engineer

    2 days ago

    Bengaluru, Karnataka, India Le Human Resources Solutions Full time ₹ 15,00,000 - ₹ 28,00,000 per year

    Opportunity for Bogie Design Lead Engineer for BangaloreExperience- 8+ yearsLocation - BangaloreIndustry- Only Aerospace and AutomotiveGraduation - BE/ B.tech Mechnaical (Mechanical engineer expertise, with material specialization. Manufacturing and Assembly process expertise)Responsibilities & Accountabilities:Delivery of Bogie Engineering outputs, in...

  • Senior Structural Analysis Engineer

    2 days ago

    Bengaluru, Karnataka, India Cyient Full time ₹ 20,00,000 - ₹ 25,00,000 per year

    Responsible for performing structural analysis of aircraft components, assemblies, and systems while working as a coordinated teamStructural analysis includes calculation of loads, Static analysis, Fatigue analysis, Damage-Tolerance analysis, and Vibration analysisEvaluate structural integrity of aircraft components by way of classical hand calculations and,...