Bunching Machine Operator

7 days ago

Dhule, Maharashtra, India Harsh Placement Services Full time ₹ 2,00,000 - ₹ 4,00,000 per year


Job Description:
 

 Job Description



 
HPS/2024/499
Bunching Machine Operator
Male
2
3 to 5
10th, 12th or ITI/DME

Bunching/Stranding Machine Operator

A. Knowledge of bunching/stranding machine operations
B. Minimum 5 years of experience in the same line

 

1. Strictly abide by various operating procedures to ensure safe production.

2. According to the lay length requirements specified by the process, install the corresponding pulleys and lay length gears according to the lay length table.

3. Install the pay-off reel, and pull the copper wire through the wire storage of the pay-off rack to the wire inlet end of the host, and then pass into the host through the guide input. One of them must be guided by the meter counter (otherwise, the meter counter will not count after power on).

4. Install the take-up reel, and the wire passing through the host will pass through each guide and twist the bow, and finally wind a few turns on the take-up reel.

5. Turn on the main power switch in the electric cabinet of the host, and set the length budget of the meter counter according to the process requirements. If the original length of the original meter is not zero, it should be cleared.

6. Flip the six toggle switches on the side of the electrical control cabinet of the host to the ON position.

7. Check whether the tray at the bottom of the main unit has been lowered to the end. If it has not been lowered to the end, loosen (turn it counterclockwise) the switch of the oil pressure pump to lower it to the end, and close the door and cover.

8. Turn the "speed setting potentiometer" on the electrical cabinet of the host computer to the end counterclockwise, press the "motor start" button, and then slowly turn the "speed setting" potentiometer clockwise, and the machine will start running at the running speed Indicated by the tachometer.

9. When the predetermined length is reached, the machine will automatically stop. After the twisting bow is completely stopped, open the hood and lower the unloading door. Turn off the oil pump switch again (turn it clockwise), pull out the oil pump hook, and squeeze the oil pump handle to raise the tray against the take-up reel. After unloading the spool, in order to prevent the hydraulic handle from falling off, hook the hook to the handle of the oil pump.

10. During operation, if any disconnection is found, the machine will automatically stop emergency. If an unexpected situation occurs, you can press the "Emergency Stop" button when an emergency stop is needed, and the machine will stop quickly.

11. When wire breakage or wire change occurs, the connector should be small and reliable. Before the joint reaches the take-up reel, it should run at low speed. At this time, it should be operated in jog mode. The jog operation method is as follows: open the door cover, press the micro switch with your left hand, and press the "inch button" with your right hand, the bow will run at low speed. Release this button to stop running. During the inching process, the joint should be observed visually. After the joint reaches the take-up reel, the door cover can be covered and the normal operation can be performed.

12. At the end of the work, the power should be cut off, the waste should be cleaned up, and the machine should be kept tidy.

 

  • Stranding Machine Operator

    1 week ago

    Dhule, Maharashtra, India Harsh Placement Services Full time ₹ 84,000 - ₹ 6,00,000 per year

    Job Description:   Job Description  HPS/2024/501Stranding Machine OperatorMale33 to 510th, 12th or ITI/DMEA stranding machine operator is responsible for setting up, loading, and operating a stranding machine to produce large section steel ropes. They also make adjustments to ensure the strand meets quality specifications and are responsible for their...

  • Sleeting Machine Operator

    1 week ago

    Dhule, Maharashtra, India Harsh Placement Services Full time ₹ 2,00,000 - ₹ 4,00,000 per year

    Job Description:Job description  HPS/2024/504Sleeting Machine OperatorMale33 to 510th, 12th or ITI/DMEHaving good knowledge of operating Machine Slitting machine operators work in factories to use equipment to cut materials into slats of a set width and length. They work with a variety of materials, such as cardboard, metal, or plastic, and each...

  • Multi Wire Machine Operator

    1 week ago

    Dhule, Maharashtra, India Harsh Placement Services Full time ₹ 4,00,000 - ₹ 6,00,000 per year

    Job Description:   Job Description  HPS/2024/500Multi Wire Machine OperatorMale23 to 510th, 12th or ITI/DMEPerform duties to operate multiple types of machines to include gag straightening, demagnetizing, furnaces, shot blasting, saws, overhead cranes, forklift and CombiLift and to include final inspection.A Wire Spooling Machine Operator is responsible...

  • Foil Machine Operator

    1 week ago

    Dhule, Maharashtra, India Harsh Placement Services Full time ₹ 20,000 - ₹ 25,000 per year

    Job Description:Job description  HPS/2024/503Foil Machine OperatorMale33 to 510th, 12th or ITI/DMEA hot foil machine heats the hot foil die plate so this can transfer the image or design onto a surface.The shiny pigment from the thin hot foil sheet adds that much-needed metallic color to the plate's design as it gets impressed onto the surface of...

  • Tool Room Operator

    6 days ago

    Dhule, Maharashtra, India Paradise Placement Consultancy Full time ₹ 1,44,000 - ₹ 2,16,000 per year

    Job Description:Hiring for Tool Room Position: –  Tool Room OperatorQualification: –   ITI/DiplomaExperience: – Min 2 years of experience in Handled Milling machine, Die Assembling, lathe machine, grinding machine, drilling machineSalary Budget: LPALocation:  Dhule (Local candidates should be preferred)if you are interested kindly send your...

  • Extruder Operator

    1 week ago

    Dhule, Maharashtra, India Harsh Placement Services Full time ₹ 2,40,000 - ₹ 3,00,000 per year

    Job Description:Job Description -  HPS/2024/498Extruder OperatorMale23 to 510th, 12th or ITI/DMEExtruder Operator:- Preferably ITI – Plastic Processing Operator (PPO) or any mechanical (diploma/engineer). Should have 5 to 6 years' experience in PP/PET sheet extruder is preferred. In addition to this, the following experience is also an added...

  • PLC Programmer

    1 week ago

    Dhule, Maharashtra, India Harsh Placement Services Full time ₹ 6,00,000 - ₹ 8,00,000 per year

    Job Description:Job description  HPS/2024/506PLC ProgrammerMale23 to 5BE Elc & TCKnowledge Programming, PLC Fault Finding Knowledge and Programme InstalmentDesigns, maintains and troubleshoots machines and plants that use programmable logic controllers.The PLC Programmer must be able to identify and provide reliable solutions for all technical issues to...

  • Engineer - PLC & Hydraullic

    2 weeks ago

    Dhule, Maharashtra, India Suzlon Group Full time ₹ 5,00,000 - ₹ 15,00,000 per year

    Job Location: Dhule, MaharashtraMandotary: Wind Blade Manufactruing experience/ Polymer Industry/ Automobile, Large scale FRP Products, Heavy Machinery Manufacturing & Engg Companies. **Roles and ResponsibilitiesProvide technical support during commissioning of new equipment or processes.Collaborate with cross-functional teams to ensure smooth operation of...

  • Bunching Machine Operator

    2 days ago

    dhule, India Harsh Placement Services Full time

    Job Description:   Job Description  HPS/2024/499Bunching Machine OperatorMale23 to 510th, 12th or ITI/DMEBunching/Stranding Machine OperatorA. Knowledge of bunching/stranding machine operationsB. Minimum 5 years of experience in the same line   1. Strictly abide by various operating procedures to ensure safe production.2. According to the lay length...

  • Carton Machine Operator

    1 week ago

    Dhule, India Prosoft Placement, Maharashtra Full time

    Vacancy for **"Carton machine operator "** in Dhule, Maharashtra. **Post - Carton Machine Operator.** **Experience - 1+ years** of experience of Carton Machine Operator. Job Location - Dhule, Maharashtra - 424001. **Salary - 25,000/- to 35,000/- pm** Cell: - 9423191075, 9423904225 ( 11 am to 7 pm ) For any more details, call - **Prosoft Placements,** Shop...

  • Hplc Machine Operator

    3 days ago

    Dhule, India Prosoft Placement, Maharashtra Full time

    Job Opening in QC department of a Chemical company in Dhule.... **Post - HPLC Machine Operator** Experience - 1+ years of experience to handle HPLC machine independently. Education - BSc / MSc ( Chemistry ), BE ( Chemical ) Job Location - Dhule, Maharashtra **Salary - 20,000/- to 28,000/- pm** **Cell: - 9423191075, 9423904225 ( 11 am to 7 pm )** For...