CNC Setter/operator

10 hours ago

Vasai, India VRHR Associates Full time

Position : CNC Bending Machine operator

Location : Nallasopara Phata

Qualification: Any

Experience: 4-5 Year’s Experience.

**Salary**: 25,000 - 35,000 P.M.

Job Profile:
Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.

Positions and clamps end stops on machine to set specified location of bend.

Inserts or screws plug stops into guide wheel to set specified degree of bend.

Positions workpiece against end stop.

Locks holding clamp and guide clamp onto workpiece.

Lubricates workpiece with oil.

Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.

May slide mandrel into tubing instead of using guide clamp.

May preheat workpiece, using hand torch or heating furnace.

May use hand-powered bending machine for short runs.

May fill tubes or pipe with sand, resin, or lead to prevent wrinkling or collapsing during bending operation.

May heat tube, using torch, and manually bend tube or pipe around forming blocks.

May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.

May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator; Tube-Bending-Machine Operator. Requirement for Job

Setting up the machines

Clamping and aligning workpieces

Servicing, care and maintenance of the machines

Company Profile:
We are a manufacturing company

**Salary**: ₹25,000.00 - ₹35,000.00 per month

**Benefits**:

- Provident Fund

Schedule:

- Day shift
- Rotational shift

Supplemental pay types:

- Shift allowance

Application Question(s):

- Kindly let us know your last drawn CTC
- Kindly let us know how soon can you join if selected
- Do you have 4 years experience of CNC Bending machine

**Education**:

- Secondary(10th Pass) (preferred)

**Experience**:

- CNC bending machine operator: 4 years (preferred)

**Speak with the employer**
+91 7499502317

  • CNC Setter/operator

    2 weeks ago

    Vasai, India Riddhi ENGINEERING WORKS Full time

    Cnc operator setter Expireance 1 year **Salary**: ₹10,000.00 - ₹16,000.00 per month Schedule: - Rotational shift Ability to commute/relocate: - Vasai, Palghar - 401208, Maharashtra: Reliably commute or willing to relocate with an employer-provided relocation package (required) **Education**: - Secondary(10th Pass) (preferred) **Experience**: -...

  • CNC Setter/operator

    7 days ago

    Vasai, Maharashtra, India GRACE ENGINEERING Full time

    CNC LATHE SETTER/OPERATOR FULL TIME VASAI (East) Salary : 15000 - 25000 Pay: ₹15,000.00 - ₹25,000.00 per month Schedule: - Day shift Work Location: In person

  • CNC Lathe Setter/operator

    2 weeks ago

    Vasai, India SAIRISH DIES & TOOLS Full time

    WANTED CNC LATHE OPERATOR /SETTER DIRECT CONTACT ; 8369624927 Supplemental pay types: - Overtime pay - Yearly bonus Ability to commute/relocate: - Vasai, Maharashtra: Reliably commute or planning to relocate before starting work (required) **Experience**: - total work: 3 years (preferred) **Speak with the employer** +91 7907045083

  • CNC Lathe Machine Operators, Setters, Programmers

    1 week ago

    Vasai, India Das Engineering Works Full time

    Company: Das Engineering Works Description: Need CNC Lathe Machine Programmers, Setters and Operators (Siemens Control - 828D Model) Production Line. We Are Industrial Valves, Pumps and Spare Parts Manufacturers. Gender: Male Education: Any, No Bar Experience: Min. 5 Years **Salary**: ₹ 18,000 - ₹ 30,000 Req. CNC Lathe Machine Programmers, Setters...

  • CNC Lathe Operator

    1 week ago

    Vasai, Maharashtra, India Bhansali Components Full time

    CNC LATHE PROGRAMMER/ SETTER/ OPERATOR, FANUC CONTROLLER. **Job Types**: Full-time, Permanent Pay: ₹12,000.00 - ₹25,000.00 per month **Benefits**: - Health insurance Schedule: - Day shift - Rotational shift Supplemental pay types: - Overtime pay - Performance bonus **Experience**: - total work: 1 year (preferred) Work Location: In person

  • CNC Setter/operator

    1 week ago

    Vasai, Maharashtra, India FLEDON ENGINEERING WORKS ORIS BEDS Full time

    **Department**: Production / Manufacturing **Reports To**: Production Supervisor / CNC Programmer The CNC (Computer Numerical Control) Operator is responsible for setting up, operating, and maintaining CNC machines to perform tasks such as drilling, grinding, milling, and turning on metal components. The role requires precision, attention to detail, and a...

  • CNC Lathe Machine

    1 week ago

    Vasai, India Das Engineering Works Full time

    Company: Das Engineering Works Description: Need CNC Lathe Programmers, Setters and Operators (Siemens Control - 828D Model) Production Line. We Are Industrial Valves, Pumps and Spare Parts Manufacturers. Gender: Male Education: Any, No Bar Experience: Min. 3 Years **Salary**: ₹ 18,000 - ₹ 30,000 Req. CNC Lathe Programmers, Setters and Operators...

  • CNC Lathe Operator

    2 weeks ago

    Vasai, India Spectra luminaires private limited Full time

    **Job Summary** This position is responsible for producing machined parts by programming, setting up and operating a CNC machine. Also perform daily and regular cleaning and light maintenance tasks on CNC machinery. Use specialized instruments to ensure quality requirements. **Responsibilities and Duties** Machine Setup: Prepare and set up CNC machines for...

  • CNC Operator

    1 week ago

    Vasai, Maharashtra, India Riddhi Enterprises Full time

    cnc operator required for manufacturing company who has knowledge of furniture background **Salary**: ₹22,000.00 - ₹25,000.00 per month Schedule: - Day shift **Education**: - Bachelor's (preferred) **Experience**: - CNC Programming: 1 year (preferred) - total work: 1 year (preferred) Shift availability: - Day Shift (preferred) Work Location: In...

  • CNC Operator at Vasai

    10 hours ago

    Vasai, India Jobjcs Full time

    **CNC operator (Fanuc control) - 1 to 2 years of experience at Vasai** **Experience - 1-2 years in fanuc control** **Salary - +91-XXXXXXXXXX (12 hours)** **Share your CV on whats app 8286841266** J **Salary**: ₹13,000.00 - ₹15,000.00 per month **Salary**: ₹12,000.00 - ₹16,000.00 per month **Benefits**: - Health insurance - Leave encashment -...