Coating Inspector

1 day ago

Surat Gujarat, India Advanced Institute of Nondestructive Testing & Training (ANDT) Full time

Requirement - Coating Inspector

Location: Surat, Gujarat

Client - L&T

Painting Related:
Surface Preparation: Dry abrasive blasting, Hand & Power Tool cleaning, Pickling & Passivation.

Coating Systems : Liquid Epoxy Coating, Thermal Sprayed Alu, Internal Lining, Zinc Based Coating.

Method of Paint Application: Airless/Conventional spraying, Stripe coating, Brush & Roller Application etc.

Testing of Prepared surface: Surface contamination - Test
- Presence of Salts & Chlorides, Dust Level measurement

on blasted surface, Anchor Profile by Testex Tape, Moisture, Oil & Grease, Holiday/Pinhole detection, ,

Coating thickness
- WFT/DFT, Adhesion Test
- X cut/ cross Hatch, Blotter test for compressed air quality.

Coating: Inspection of coating faults such as Blisters, Blooming, Chalking, Cracking, Sagging, Run, Tear, Dry Spray,

Flaking, Holidays, Lifting, Orange peel, Pinholes, Wrinkling, and Opacity defects etc.

Equipment’s and Piping Painting/ coating: Dry Film Thickness
- Electromagnetic Gauge, Wet Film Thickness
- Wet Film Gauge (Tooth Gauge), Adhesion Test-Dolly pull off gauge (ASTM D 4541), Tape pulling (Cross Hatch & X Cut),

Chemical Resistance Test
- MEK wiping, Check Profile height
- Testex tape & Calibrated Dial micrometre.

Qualification : DME / B.E

Experience : 8 to 12 Years

**Certification : NACE Level II, Bgas Gr I + SA Experience is prefarable.

  • QA/qc Coating Inspector

    1 day ago

    Vadodara, Gujarat, India Solution coatings Pvt Ltd Full time

    **Skills**: - Inspection of Surface preparation, Planning daily work for sand blasters & painters, Control & storage of painting / coating consumables, Calibration & validation blasting and painting equipments, Qualification/Knowledge of coating processes, Atmospheric conditions, Monitoring of coating cycle, DFT, WFT, Adhesion, Holiday test etc. - Inspect,...

  • Paint Inspector

    1 week ago

    Ahmedabad, Gujarat, India KK HR services Full time

    To review Coating Procedure Supervise the Contractor and Subcontractor Activities to Implementation of various Customer Specification during production process To monitoring and Controlling all Contractor and Subcontractor Inspection Activities (Surface preparation Blasting and Painting to ensure and check abrasive, surface profile, coating, environmental...

  • Quality Inspector

    2 weeks ago

    POR, Vadodara, Gujarat, India real surface finish pvt ltd Full time

    Key Responsibilities: 1. Micron Check: Perform micron measurements accurately to ensure material meets quality standards. Maintain records of measurements and report deviations if any. 2. Quality Check: Inspect materials on two production lines for quality compliance. Identify and segregate defective products. 3. Material Rejection in PVDF and Powder...