Electrician Plumber

**Job Summary**
- 1) Installs electrical circuitry and fixtures, plumbing and plumbing fixtures, and engines in sailboats, using power and handtools: Reads blueprints and work diagrams to determine length and size of wire needed.
- 2) Measures and cuts wire to specified length, using tape measure and electrician's pliers.
- 3) Strips insulation from ends of wire, using electrician's knife, and connects wire to terminals, using screwdriver.
- 4) Strings wire harness beneath hull flange to secure harness with nylon strap.
- 5) Pulls length of wire from harness at specified points to complete branch circuits.
- 6) Drills holes in bulkhead and cabin and mounts panels and fixtures, using electric drill and screwdriver.
- 7) Places toilet in prescribed location on toilet pedestal and secures toilet with bolts, using hand held wrench.
- 8) Places sink in countertop cutout, applies sealant around edge of sink, using caulking gun, and secures sink with fasteners, using wrench.
- 9) Forces ends of prescribed, precut hoses over intake and discharge fittings to provide water for plumbing system and engine cooling.
- 10) Installs and tightens hose clamps to form watertight seal, using wrench and screwdriver.
- 11) Operates saw to cut holes for valves, outlets, and propellor drive shaft.
- 12) Inserts valve and outlet fittings through hole to provide watertight fit.
- 13) Operates overhead hoist controls to position engine in boat.
- 14) Pushes and pulls engine to position engine over mount rails.
- 15) Inserts stub shaft in engine drive coupling to aid in aligning engine on mount rails and to locate position for shaft gland on stern post.
- 16) Drills holes in engine mount rails, using portable electric drill, inserts bolts, and tightens bolts, using wrench, to secure engine to boat.
- 17) May lead and give directions to other workers performing same duties

**Responsibilities and Duties**
- 1) Installs electrical circuitry and fixtures, plumbing and plumbing fixtures, and engines in sailboats, using power and handtools: Reads blueprints and work diagrams to determine length and size of wire needed.
- 2) Measures and cuts wire to specified length, using tape measure and electrician's pliers.
- 3) Strips insulation from ends of wire, using electrician's knife, and connects wire to terminals, using screwdriver.
- 4) Strings wire harness beneath hull flange to secure harness with nylon strap.
- 5) Pulls length of wire from harness at specified points to complete branch circuits.
- 6) Drills holes in bulkhead and cabin and mounts panels and fixtures, using electric drill and screwdriver.
- 7) Places toilet in prescribed location on toilet pedestal and secures toilet with bolts, using hand held wrench.
- 8) Places sink in countertop cutout, applies sealant around edge of sink, using caulking gun, and secures sink with fasteners, using wrench.
- 9) Forces ends of prescribed, precut hoses over intake and discharge fittings to provide water for plumbing system and engine cooling.
- 10) Installs and tightens hose clamps to form watertight seal, using wrench and screwdriver.
- 11) Operates saw to cut holes for valves, outlets, and propellor drive shaft.
- 12) Inserts valve and outlet fittings through hole to provide watertight fit.
- 13) Operates overhead hoist controls to position engine in boat.
- 14) Pushes and pulls engine to position engine over mount rails.
- 15) Inserts stub shaft in engine drive coupling to aid in aligning engine on mount rails and to locate position for shaft gland on stern post.
- 16) Drills holes in engine mount rails, using portable electric drill, inserts bolts, and tightens bolts, using wrench, to secure engine to boat.
- 17) May lead and give directions to other workers performing same duties

**Required Experience, Skills and Qualifications**
Diploma in Electrical & electronic
**Benefits**
As per Industry stands

Pay: ₹10,000.00 - ₹15,000.00 per month