Bending Machine Operator

19 hours ago

Noida Uttar Pradesh, India Metworks Systems Pvt. Ltd, Full time

1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
- 2) Positions and clamps end stops on machine to set specified location of bend.
- 3) Inserts or screws plug stops into guide wheel to set specified degree of bend.
- 4) Positions workpiece against end stop.
- 5) Locks holding clamp and guide clamp onto workpiece.
- 6) Lubricates workpiece with oil.
- 7) Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
- 8) May slide mandrel into tubing instead of using guide clamp.
- 9) May preheat workpiece, using hand torch or heating furnace.
- 10) May use hand-powered bending machine for short runs.
- 11) May fill tubes or pipe with sand, resin, or lead to prevent wrinkling or collapsing during bending operation.
- 12) May heat tube, using torch, and manually bend tube or pipe around forming blocks.
- 13) May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.
- 14) May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator I; Tube-Bending-Machine Operator I.

Pay: ₹15,000.00 - ₹24,000.00 per month

**Benefits**:

- Cell phone reimbursement
- Provident Fund

Schedule:

- Day shift

Supplemental pay types:

- Yearly bonus

**Education**:

- Higher Secondary(12th Pass) (preferred)

**Experience**:

- Bending Operator: 2 years (required)
- total work: 4 years (preferred)

License/Certification:

- ITI (preferred)

Work Location: In person

  • Bending Machine Operator

    1 week ago

    Noida, Uttar Pradesh, India Metworks Systems Pvt. Ltd, Full time

    Knowledge of Hindustan hydraulics and Amada bending machine and panel delem 53. **Benefits**: - Cell phone reimbursement - Provident Fund Schedule: - Day shift Supplemental Pay: - Yearly bonus Ability to commute/relocate: - Noida, Uttar Pradesh: Reliably commute or planning to relocate before starting work (preferred) **Education**: -...

  • Bending Machine Operator

    6 days ago

    Noida, India Metworks Systems Pvt. Ltd, Full time

    1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine. - 2) Positions and clamps end stops on machine to set specified location of bend. - 3) Inserts or...

  • Bending Machine Operator

    3 days ago

    Kanpur, Uttar Pradesh, India SST LASERTEK Full time

    **Position Title**: Bending Machine Operator / CNC Bending Operator **Department**: Production / Fabrication **Industry**: Sheet Metal Fabrication / Manufacturing **Location**: PANKI ISPAT NAGAR **Job Types**: Full-time, Permanent Pay: ₹10,000.00 - ₹25,897.07 per month Schedule: - Rotational shift Supplemental Pay: - Overtime pay - Performance...

  • Bending Machine Operators

    19 hours ago

    Greater Noida, India ases security pvt ltd Full time

    There is requirement of 2 Bending Machine Operators for **M/s Hindustan Hydrolicks Machine 100ton -2 machines & 25 ton -01 no,s** Eligibility criteria: - (i) Soft ware Knowledge -(I) ESA-630 & ESA-5530 (II)Rotational Shift (iii) 3-4 yrs Experience as Bending machine operator and also for Dye Change works. **Job Type**: Permanent Pay: ₹30,000.00 -...

  • Bending & Cutting Machine Operator (Sheet Metal - Trumpf and Hans)

    2 weeks ago

    Noida, Uttar Pradesh, India intensiv filter himenviro Full time ₹ 2,40,000 - ₹ 3,60,000 per year

    We are looking for a skilled Bending & Cutting Machine Operator to manage sheet metal section for Trumpf Bending, Trumpf Laser Cutter, Hans Laser Cutter. You will ensure efficient programming, optimal material usage through nesting, and accurate NC file generation for smooth shop-floor execution.Key ResponsibilitiesGood operating knowledge of Bending &...

  • Laser Machine Operator

    5 days ago

    Ghaziabad, Uttar Pradesh, India Panchal Infracon Projects Private Limited Full time

    _We are hiring skilled CNC Fiber Laser Machine Operators and CNC Press Brake Machine Operators for our stainless steel fabrication and kitchen equipment manufacturing unit._ - **Key Responsibilities**:_ **For CNC Fiber Laser Machine Operator**: - Operate CNC fiber laser cutting machines to cut SS/MS sheets as per drawings. - Set up, load/unload sheets, and...

  • CNC Bending and Laser Cutting Machine Operator

    20 hours ago

    Greater Noida, India Building Out Door Space Full time

    **Key Responsibilities**: - Set up and operate CNC laser cutting machines and CNC press brakes to cut, form, and bend metal components as per engineering drawings and job orders. - Interpret technical drawings, blueprints, and CAD files to ensure accuracy in part production. - Perform quality checks using measuring tools such as calipers, gauges, and tape...

  • CNC Bending Operator

    20 hours ago

    Noida, Uttar Pradesh, India Metworks Systems Pvt. Ltd, Full time

    **बैंडिंग ऑपरेटर - 28,000 तक** - **हेल्पर - 10701** **पता : प्लॉट नंबर 30, इकोटेक 12 ग्रेटर नोएडा 201308** **मोबाइल नंबर - 7428573436** **Job Types**: Full-time, Permanent Pay: ₹20,000.00 - ₹28,000.00 per month **Benefits**: -...

  • Power Press Machine Operator

    2 weeks ago

    Noida, India CORE MINDS TECH SOLUTIONS Full time

    Position - Power Press Machine Operator Location - Greater Noida Salary - 10 to 15000/month Industry - Injection Molding EXP- 1-2 Years Education - Any Graduate Skills - sheet punching, bending ,Hole, Shearing, Channel slotting, Pipe punching, Angle punching, Plate cutting ,Pipe slotting, Rod cutt

  • Vending Machine Operator

    2 weeks ago

    Greater Noida, India mangosorange Group Full time

    Qualification Minimum 10th or ITI Diploma - Minimum Experience 1-5 year - Bending tool Knowledge - Ability to read and understand engineering drawings. - Knowledge of sheet metal bending processes. - Understanding of machine controls and safety procedures. - Basic math skills (for measuring angles, dimensions, and material thickness). Pay: ₹8,086.00 -...