Instrumentation Designer

3 weeks ago

gurugram, India ManpowerGroup India Full time

POSITION SUMMARY: Electrical/Instrumentation Engineer position provides engineering of systems and electrical/instrumentation equipment associated with the design and construction of Direct Reduction plants and new technology initiatives. Supports or leads E&I plant commissioning and startup activities as required.SUPERVISORY RESPONSIBILITIES:Electrical/Instrumentation (E/I) Engineer may act as an E/I discipline Support Engineer, or with suitable experience, may be assigned as an E/I discipline Lead Engineer. E/I Engineers provide technical support for various projects and initiatives as assigned by the Chief – Electrical & Instrumentation Engineering. E/I Engineers will not have direct reports but may be asked to coordinate independently with designers or other engineers, and verify correctness and completeness of the work products.DUTIES/RESPONSIBILITIES:Strong experience in Instrumentation and electrical.Preparation of P&ID, IO list, instrument list, manual & valve list, instrument datasheet, instrument hook-ups, isometric drawings, electrical HT/LT panel design inputs, HT/LT panel vendors drawing checking, HT/LT motor, HT/LT VFD, illumination, earthing, cable engineering, cable routing, cable termination, PLC drawing.Demonstrates solid grasp of principles and practices of electrical engineering, with stronganalytical/calculation capacity and expertise in one or more subject areas.Perform designs and system analyses through calculations basic to Electrical Engineering, with direction from a Senior Electrical Engineer, if necessary.Sketch conceptual designs, transferring ideas to the designers for development of E/I drawings.Coordinate with Process Engineering and other disciplines on the development of Piping and Instrument Drawings (P&ID’s).Maintain the instrument list associated with the P&ID’s.Develop logic drawings (E9’s) from various data points, such as: P&ID’s, vendor description of operation or functional description and coordinating with other project disciplines (Process, Mechanical, Operations, etc.)Develop device location drawings (E5 and E6’s) working with the modeling group to ensure E&I items are located properly and with access to the device for maintenance.Responsible for the design and configuration of the Process Control System (DCS). Provides a detail specification for both hardware and software. Ensure the vendor has the proper information required prior to the Factory Acceptance Test (FAT) for the system to properly designed, fabricated, and configured for all required data points and communications at the job site.Based on experience, may coordinate the E/I design effort as the Lead E/I Engineer for a particular project by: o Directing the efforts of assigned engineers and designers for the E/I system design requirements.o Checking drawings, design calculations, sketches, etc. for the project.o Developing specifications/requisitions for support of purchasing effort.o Ensuring the engineering and deliverables as per the schedule and providing schedule status updates.o Reviewing and approving purchasing quotations, vendor drawings, and QA documents.o Ensure that relevant E/I information from vendor documentation and drawings is incorporated into the detail design

  • Instrumentation Designer

    2 weeks ago

    Gurugram, India RC Project Consultancy (RCPC) Full time

    Minimum 9 15 years experience in of FEED/EPC of Fertilizer/ Petrochemical/ Refinery PlantsInstrumentation design activities - 3D modelling for instrumentation equipment, 3D model extraction for instrument layouts, CAD drafting work for instrumentation deliverables - Knowledge of interfaces with other engineering disciplines in carrying out project work for...

  • Instrumentation Designer

    4 weeks ago

    Gurugram, Haryana, India Right Advisors Private Limited Full time

    **Job Title**: Instrumentation Designer **Experience**: 3 to 14 Years **Education**: Diploma in Instrumentation or relevant field **Job Location**: Gurgaon **Key Responsibilities**: - Prepare 3-D models, cable routing designs, and hook-up drawings. - Create and update location plans, wiring diagrams, and loop drawings. - Collaborate with engineers and...

  • Instrumentation design engineer

    2 weeks ago

    Gurugram, India RC Project Consultancy (RCPC) Full time

    Minimum 10 - 12 years experience in of FEED/EPC of Fertilizer/ Petrochemical/ Refinery PlantsInstrumentation design activities - 3D modelling for instrumentation equipment, 3D model extraction for instrument layouts, CAD drafting work for instrumentation deliverables - Knowledge of interfaces with other engineering disciplines in carrying out project work...

  • Instrumentation Designer

    5 months ago

    Gurugram, Haryana, India TRS Staffing Solutions Full time

    LOCATION- India GurgaonJOB SKILLS Instrumentation and control systemsTYPE PermanentJOB ID - 114804SALARY - ₹ 1000000 - ₹ 1500000Experience in Detailed Engineering in Oil & Gas (E&C) Sector. Adept in using Instrument design documentation tools (Smart Sketch, MicroStation,AutoCAD, SPI). Hands on experience of Instrument design tools (SP3D, SmartPlant...

  • Instrumentation Designer

    5 months ago

    Gurugram, Haryana, India ANI Integrated Services Limited Full time

    We're hiring for Gurgaon location for Below position: Instrumentation Designer - SP3D Modeller Experience: Diploma/ ITI- 6 yrs OR B.E/ B.Tech - 4 yrs Instrumentation Designer - E3D Modeller Experience: Diploma/ ITI- 2 yrs OR B.E/ B.Tech - 1 yrs Job Type : Contract (ONE Year Extendable) Pay: ₹50,000.00 - ₹80,000.00 per month Schedule: - Day...

  • Design Lead – Solar

    2 months ago

    Gurugram, India ASSYSTEM Full time

    Job DescriptionObjective: As Design Lead (Instrumentation), the person shall be capable of reviewing & executing Engineering Activities of instrumentation /Automation of Solar PV Power Plants. He shall facilitate the modellers in development of BIM 3D Model for PV Solar Power plants. In addition, she / he has to coordinate with other departments including...

  • Instrumentation Engineer

    2 weeks ago

    Gurugram, India RC Project Consultancy (RCPC) Full time

    Minimum 9 15 years experience in of FEED/EPC of Fertilizer/ Petrochemical/ Refinery PlantsInstrumentation design activities - 3D modelling for instrumentation equipment, 3D model extraction for instrument layouts, CAD drafting work for instrumentation deliverables - Knowledge of interfaces with other engineering disciplines in carrying out project work for...

  • Design Engineer

    1 month ago

    Gurugram, India ASSYSTEM Full time

    Job DescriptionObjective / PurposeThe person shall be responsible for the complete design, detailing and proposal engineering of instrumentation /Automation of Power plants and substations. The Design Lead Engineer of Instrumentation shall manage the entire design for a project or a set of smaller projects including co-ordination with other disciplines viz.,...

  • Instrumentation Designer

    1 month ago

    Gurugram, India ManpowerGroup India Full time

    POSITION SUMMARY: Electrical/Instrumentation Engineer position provides engineering of systems and electrical/instrumentation equipment associated with the design and construction of Direct Reduction plants and new technology initiatives. Supports or leads E&I plant commissioning and startup activities as required.SUPERVISORY...

  • Instrumentation Designer

    1 month ago

    Gurugram, India ManpowerGroup India Full time

    POSITION SUMMARY: Electrical/Instrumentation Engineer position provides engineering of systems and electrical/instrumentation equipment associated with the design and construction of Direct Reduction plants and new technology initiatives. Supports or leads E&I plant commissioning and startup activities as required. SUPERVISORY RESPONSIBILITIES: ...

  • Instrumentation Designer

    1 month ago

    Gurugram, India ManpowerGroup India Full time

    POSITION SUMMARY: Electrical/Instrumentation Engineer position provides engineering of systems and electrical/instrumentation equipment associated with the design and construction of Direct Reduction plants and new technology initiatives. Supports or leads E&I plant commissioning and startup activities as required.SUPERVISORY...

  • Instrumentation Designer

    1 month ago

    gurugram, India ManpowerGroup India Full time

    POSITION SUMMARY: Electrical/Instrumentation Engineer position provides engineering of systems and electrical/instrumentation equipment associated with the design and construction of Direct Reduction plants and new technology initiatives. Supports or leads E&I plant commissioning and startup activities as required.SUPERVISORY...

  • Design Engineer Instrumentation

    3 months ago

    Gurugram, India Siemens Energy Full time

    Design Engineer Instrumentation & Controls About the Role Location India Haryana Gurugram Country/Region: India State/Province/County: Maharashtra City: Pune Company Siemens Energy Industrial Turbomachinery India Private Limited Organization Transformation of Industry Business Unit Compression Full / Part time Full-time Experience Level...

  • Draughts Person

    1 month ago

    Gurugram, India ASSYSTEM Full time

    Job DescriptionAs a Draughts Person, she / he shall be capable of carrying out drafting activities in PV Solar Power Projects. The Designer shall have reasonable creativity in generating the Instrumentation - SCADA drawings in complete manner and capable of suggesting alternatives/modifications.Key Responsibilities:• Receive Inputs from Design Engineers•...

  • Control & Instrumentation Engineer

    4 months ago

    Gurugram, India Siemens Limited Full time

    We are seeking a skilled and experienced Control & Instrumentation Engineer with 4-6 years of experience in power plant engineering. The ideal candidate will have a comprehensive understanding of control systems, instrumentation, and power plant operations. You will be responsible for designing, developing, and managing control systems and instrumentation...

  • Instrumentation Modeller

    5 months ago

    Gurugram, Haryana, India Right Advisors Private Limited Full time

    **Qualification -** Diploma / ITI / B.tech / B.E **Job location - **Gurgaon **Salary - **9.5LPA - **Job Description -Instrumentation Modeller**_ **Job roles and responsibilities: - ** Minimum 2 years of experience in Sp3d/E3d modelling. Utilize PDS/SP3D and PDMS/E3D software to create detailed 3D models of instrumentation systems. Ensure that models...

  • Lead Design Engineer Instrumentation

    3 months ago

    Gurugram, India Siemens Energy Full time

    Lead Design Engineer Instrumentation & Controls About the Role Location India Haryana Gurugram Country/Region: India State/Province/County: Maharashtra City: Pune Company Siemens Energy Industrial Turbomachinery India Private Limited Organization Transformation of Industry Business Unit Compression Full / Part time Full-time Experience...

  • Control & Instrumentation Engineer

    2 weeks ago

    Gurugram, India RC Project Consultancy (RCPC) Full time

    B.E./B.Tech (Instrumentation) Job Description/ core competencies:Job Description:- Field Instrument Selection/Sizing/Evaluation and vendor drawing review.- Preferably have experience and exposure to detailed engineering related to all areas of I&C systems.- Knowledge of relevant international code & standards and best practices for O&G, Fertilizers,...

  • Instrumentation & Controls Eng

    2 months ago

    Gurugram, Haryana, India McDermott Full time

    **Job Overview**: The Instrumentation & Controls Engineer applies their conceptual knowledge of instrumentation and controls and with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward instrumentation and controls problems. They will be responsible for analyzing possible solutions...

  • Sp3D Modeller

    5 months ago

    Gurugram, Haryana, India Right Advisors Private Limited Full time

    **Experience**: 4+ Years **Qualification**: B.tech/B.E/ Diploma/ITI **Job Summary**: **Responsibilities**: - Utilize SmartPlant 3D software to develop three-dimensional models of instrumentation components including sensors, transmitters, control valves, analyzers, and other related equipment. - Interpret engineering drawings, P&IDs (Piping and...