Lead Dcs Commissioning Engineer

Summary Required Lead DCS Commissioning for Obra Turbine Island Project Lead DCS Commissioning Engineer is responsible for I C - DCS TGC commissioning i e cold and hot commissioning activities for instrumentation TGC for STG control system in a power plant including closed loop tuning for STG trouble shooting systems tuning in a safe and reliable manner for Steam Turbine Generator and auxiliaries set He shall be familiar with Alspa using engineering tools Controcad for site closed loop tuning modification as well as for Field instrumentation setting and testing Hart protocol etc Roles and Responsibilities The I C Alspa DCS TGC Commissioning engineer ensures that Study review and correct logic and hardware documentation SAMA PFUPs Wiring Diagrams Implement modification using engineering tools Controcad Loop checks Instrumentation setting and testing Hart protocol Perform elementary tests then functional and sequence tests Tune and monitor both closed and open loop functions Coordinate with DCS for comprehensive tests Troubleshooting both hardware and software problems incidents Fill in test sheets and ITPLs and create reports Inter-change with client and third parties Familiar with P320 and other industrial advanced control systems PLC s DCSs motor controls etc Establish develop and execute Site Acceptance Tests SAT Participate and assist factory testing on control panels FAT - for TGC DCS Generator control panel Knowledge of software and hardware of numerous PLC based Control Monitoring systems ABB Allen Bradley PC3000 etc Knowledge in all instruments disciplines including Digital Analogue Electronics pneumatics Hydraulics a nd process control pressure Temperature Flow and level Conducting tests and repairs on plant instrumentation and control systems Provide technical supports for process commissioning engineer Complete I O Checks instrument configuration and required documentation for project Investigate and trouble shoot electrical control issues with the commissioning team Participate in Hazop Studies and providing support in the instrumentation for procurement and construction activities Commission and trouble shoot conventional IO Hart and fieldbus Instruments loops Develop instrument indexes and IO Point assignments The personnel assigned to him her are fully acquainted with the site specific rules safety regulations and environmental protection measures and that they perform their work accordingly All activities not identified in the standard or specific commissioning procedures are carried out under PTW according the site regulations A performance feedback of all employees assigned to him her is made to the COMM Commissioning is performed in a safe and timely manner Prepare for commissioning as specified in the work instructions Developing commissioning plans testing procedures protocols and reports Facilitate the turnover of systems from erection to commissioning and from commissioning to the customer in accordance with current procedure work instruction by arrangement with the COMM Ensure that the engineering department is involved in handling technical problems and decisions by arrangement with the COMM Ensure the commissioning operation quality record and feedback documentation are issued Hand over the commissioning quality and feedback documentation and software originals with a document list to the COMM for compiling and release Ensure that technical deviations are reported with a corresponding non-conformance report NCR and that the same are followed up until their completion Keep a diary to record daily work occurrences problems special information etc plus a list of pending items Maintain logbooks to record commissioning and operational events as specified in the work instructions by arrangement with the COMM Advise the COMM of any information that could influence the commissioning time schedule and or the commissioning staff planning Manage assess supervise and co-ordinate personnel assigned to him her ensure his compliance with the EHS rules deployed on site Manage the handling and inspection of the commissioning test equipment Support and train other ComE s assigned to him her Participate in site meetings by arrangement with the COMM Train the customer staff in operation and maintenance as instructed by the COMM Check the time sheets of the personnel assigned to him her and forward the same to the COMM Work off the open item lists of systems under his her responsibility by arrangement with the COMM Organise the return of all commissioning test equipment as soon as possible by arrangement with the COMM Provide information to the COMM for reporting purposes Provide by assignment completion a Field Service Report and forward the same to the COMM Provide on request technical experience feedback to project engineering departments during debriefing meeting s to be organized by the project Required Qualifications Bachelor s degree in electrical Instrumentation or equivalent Minimum 5-6 years Experience Nice to have Experience of 2-3 years on PLC DCS Commissioning Desired Characteristics Strong oral and written communication skills Demonstrated ability to analyze and resolve problems Ability to document plan market and execute programs Established project management skills Note To comply with US immigration and other legal requirements it is necessary to specify the minimum number of years experience required for any role based within the USA For roles outside of the USA to ensure compliance with applicable legislation the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used Additional Information Relocation Assistance Provided Yes LI-Remote - This is a remote position