Mechanical Design Engineer
3 weeks ago
URC Construction (P) Ltd is HIRING. Position: HVAC Design Engineer Qualification: B.E. / Diploma in Mechanical Engineering Experience: 5 to 12 Years Project Nature: Commercial / Residential / Industrial Roles & Responsibilities - Perform heat load calculations using software tools such as HAP and Carrier E20. - Select and size AHUs, FCUs, VRF systems, chillers, pumps, ducts, and piping networks as per project requirements. - Determine airflow (CFM), static pressure, and duct sizing based on ASHRAE and ISHRAE standards. - Design ventilation systems (toilets, kitchens, basements, labs, etc.) ensuring proper exhaust and make-up air provisions. - Prepare and review HVAC layout drawings, schematics, and as-built drawings using AutoCAD or Revit. - Coordinate HVAC design with architectural, electrical, plumbing, and structural disciplines. - Prepare Bill of Quantities (BOQ), equipment schedules, and material submittals. - Support project and site teams with technical clarifications, design modifications, and coordination drawings. - Conduct site visits to ensure installation aligns with design intent. - Participate in client and consultant meetings for design review and approvals. - Ensure HVAC designs comply with ASHRAE, ISHRAE, NBC, ECBC, and local authority norms. - Integrate energy-efficient, acoustic, and indoor air quality (IAQ) considerations in all designs. - Maintain proficiency in AutoCAD, HAP, Duct Sizer, Pipe Sizer, and MS Office tools. Key Result Areas - Deliver 100% technically compliant HVAC designs within defined timelines. - Maintain post client or consultant review. - Ensure 100% coordination between HVAC and other engineering disciplines. - Achieve 95% accuracy in load calculations and equipment sizing. Reports to be Maintained - HVAC Design Progress Report - Weekly - Load Calculation Summary - Milestone-based - Equipment Selection & BOQ Summary - Ongoing - Drawing Issue Register - Weekly - Design RFI Tracker - Continuous Interested candidates are encouraged to share their resumes at:
-
Mechanical Design Engineer
2 weeks ago
Chennai, India HCLTech Full timeHCLTech # Mechanical WalkIN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai📅#DriveDate:8th November Saturday (9AM-2PM)ContactPerson: Laveena Deenadayalan📍VenueLocation:ChennaiHCLTech Elcot Sez,New Cafeteria 2nd Floor602/3, 138, Medavakkam High
-
Mechanical Design Engineer
2 weeks ago
Chennai, India HCLTech Full timeHCLTech # Mechanical WalkIN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai📅#DriveDate:8th November Saturday (9AM-2PM)ContactPerson: Laveena Deenadayalan📍VenueLocation:ChennaiHCLTech Elcot Sez,New Cafeteria 2nd Floor602/3, 138, Medavakkam High
-
Mechanical Design Engineer
2 weeks ago
Chennai, India HCLTech Full timeHCLTech # Mechanical WalkIN for # Hydraulics Installation Design , #Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai#DriveDate :8th November Saturday (9AM-2PM)ContactPerson : Laveena DeenadayalanVenueLocation :ChennaiHCLTech Elcot Sez,New Cafeteria 2nd Floor602/3, 138, Medavakkam High...
-
Mechanical Design Engineer
2 weeks ago
Chennai, India HCLTech Full timeHCLTech # Mechanical WalkIN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai📅#DriveDate:8th November Saturday (9AM-2PM)ContactPerson: Laveena Deenadayalan📍VenueLocation:ChennaiHCLTech Elcot Sez,New Cafeteria 2nd Floor602/3, 138, Medavakkam High
-
Mechanical design engineer
1 week ago
Chennai, India HCLTech Full timeHCLTech # Mechanical Walk IN for # Hydraulics Installation Design , #Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai#Drive Date :8th November Saturday (9 AM-2 PM)Contact Person : Laveena DeenadayalanVenue Location : ChennaiHCLTech Elcot Sez,New Cafeteria 2nd Floor602/3, 138, Medavakkam High...
-
Mechanical design engineer
2 weeks ago
Chennai, India HCLTech Full timeHCLTech # Mechanical Walk IN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai ????#Drive Date :8th November Saturday (9 AM-2 PM) Contact Person : Laveena Deenadayalan ????Venue Location : Chennai HCLTech Elcot Sez, New Cafeteria 2nd Floor 602/3, 138,...
-
Mechanical Design Engineer
2 weeks ago
Chennai, India HCLTech Full timeHCLTech # Mechanical WalkIN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai 📅#DriveDate:8th November Saturday (9AM-2PM) ContactPerson: Laveena Deenadayalan 📍VenueLocation:Chennai HCLTech Elcot Sez, New Cafeteria 2nd Floor 602/3, 138, Medavakkam High...
-
Mechanical Design Engineer
1 week ago
Chennai, India HCLTech Full timeContact Person:- Swarali (Mention this while filling Google Form provided at Drive Location) HCLTech # Mechanical WalkIN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai #DriveDate :8th November Saturday (9AM-2PM) ContactPerson : #Swarali VenueLocation...
-
Mechanical Design Engineer
2 weeks ago
Chennai, India HCLTech Full timeContact Person:- Swarali (Mention this while filling Google Form provided at Drive Location)HCLTech # Mechanical WalkIN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai📅#DriveDate:8th November Saturday (9AM-2PM)ContactPerson:...
-
Mechanical Design Engineer
2 weeks ago
Chennai, India HCLTech Full timeContact Person:- Swarali (Mention this while filling Google Form provided at Drive Location)HCLTech # Mechanical WalkIN for # Hydraulics Installation Design ,#Mechanical Design Engineer (RPD) AND Engine Installation and Cooling with # Creo – on 8th November in #Chennai📅#DriveDate:8th November Saturday (9AM-2PM)ContactPerson:...
