See more Collapse

Mechanical Designer- Plastics

4 weeks ago

Pune Maharashtra, India Philips Full time

**Job Title**: Mechanical Designer
- Plastics -STET

In this role, you have the opportunity to

**You are responsible for**
- Mechanical design and design changes of a module/sub system/ system
- Plastics components/sub-assemblies design and development
- Conduct DFM, DFA reviews with suppliers for Plastics components/sub assemblies and good at polymer/ plastics engineering.
- Creating 3D models, assembly and detailing including drawing conversions
- Identifying the suitable materials for designs and creating and releasing BOM
- Performing hand calculations for the design feasibility
- Excellent knowledge in Plastics parts design & development
- Excellent Knowledge on Plastics processes like Injection molding, rubber molding, Compression molding, Thermoforming & Resign Molding
- Excellent knowledge on Rapid proto tying and tooling
- DFM and DFA activities and optimization of design for cost reduction
- DFMEA and identify relevant product risks
- Shall have hands-on experience in Engineering Change management
- Work with supplier, procurement engineer to complete the prototype
- Requirements Design, implementation test and integration of his/her unit in accordance with higher level requirement and design specifications/architectures
- Reliability and serviceability of the system/sub system/component
- Complying to all applicable medical standards / regulations such as ISO and FDA
- Working closely with all other team members both R&D team members (like service, quality, regulatory, marketing, clinical, etc) for projects
- Provide technical support to suppliers & other departments to fulfill project/production needs
- Support localization activities
- Knowledge of IEC 6061, ASTM, ANSI, GD&T standards are preferred

**You are a part of**

A high-impact, global organization within Philips that works across all modalities - The Sustaining Engineering Team (STET). STET has been established as **an entrepreneurial organization** that focuses on fast-paced, high-quality portfolio transfers within the Philips global supply base to mitigate risk & maximize profitability.

To succeed in this role, you should have the following skills and experience
- B Tech/ BE / M Tech. in Mechanical Engineering/Automobile /Industrial/ Plastics
- Min 7 to 10 years of experience in design and development of complex electromechanical products
- 8+ years of relevant experience in Plastics design and development (on end-to-end Medical device esp. or equivalent Automobile/Industrial products)
- Fast learner and interest to learn new technologies/business/system
- System thinking mindset and domain expertise in the related area
- Excellent communication skills & Team player
- Mindset to simplify and reach to solutions with speed
- Disciplined team worker, ability to work independently
- Strong English written and verbal communication skills required
- Strong knowledge on Mold flow analysis, Ansys and other FAE tools
- Tool designers from NTTF, GTTC, CIPET & IGTR and product designers from NTTF are preferred

**In return, we offer you**

Describe in two to three lines what tangible and intangible benefits the incumbent will gain in this role. Use our Employer Value Proposition (EVP) themes and information gathered in the RSM as input sources.

**Why should you join Philips?**

Working at Philips is more than a job. It’s a calling to create a healthier society through meaningful work, focused on improving 2.5 billion lives a year by delivering innovative solutions across the health continuum. Our people experience a variety of unexpected moments when their lives and careers come together in meaningful ways. Learn more by watching this video.

To find out more about what it’s like working for Philips at a personal level, visit the Working at Philips page on our career website, where you can read stories from our employee blog. Once there,you can also learn about our recruitment process, or find answers to some of the frequently asked questions.

LI-PHILIN

**#DIW

We have other current jobs related to this field that you can find below

  • Mechanical Designer- Plastics

    7 days ago

    Pune, Maharashtra, India Philips Full time

    Job Title: Mechanical Designer Plastics STETIn this role, you have the opportunity toYou are responsible for Mechanical design and design changes of a module/sub system/ system Plastics components/subassemblies design and development Conduct DFM, DFA reviews with suppliers for Plastics components/sub assemblies and good at polymer/ plastics engineering....

  • Mechanical Design Engg solidworks, Plastic Design

    3 weeks ago

    Pune, Maharashtra, India Source-right Full time

    Shift timing (if any): 9 to 6 pm Work Mode - Hybrid Education Required: Bachelor’s or Masters - Mechanical Engg - Experience with Solidworks. - Skilled in top-down assembly approach, plastic design, Sheetmetal and die casting also have experience in manufacturing electromechanical product development - Technical Skills required: - SolidWorks - Plastic...

  • Plastic Mold Designer

    3 weeks ago

    Chakan, Pune, Maharashtra, India Three D Magic Info Solutions Pvt Ltd Full time

    Job Title: Press Tool and Plastic Parts Mold Designer* *Responsibilities:* 1. Collaborate with engineering and production teams to understand project requirements and specifications for press tooling and plastic parts molds. 2. Design press tools and plastic molds using CAD software, considering factors such as part geometry, material properties, and...

  • Mechanical Designer

    2 months ago

    Pune, Maharashtra, India Philips Full time

    **Job Title**: Mechanical Designer The Mechanical Engineering (ME) will be part of a Sustaining Engineering team and will be responsible for the mechanical design and development of medical products for Philips Business units. Responsibilities include providing mechanical engineering support for lifecycle /sustaining projects for systems that are in...

  • Mechanical Designer

    2 months ago

    Pune, Maharashtra, India Philips Full time

    **Job Title**: Mechanical Designer **Job title**:Mechanical Designer **Your role**: - Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications. - Ensuring that the design is consistent with the higher-level architecture and requirements. -...

  • Mechanical Designer

    3 weeks ago

    Pune, Maharashtra, India Philips Full time

    **Job Title**: Mechanical Designer **Job title**:Mechanical Designer **Your role**: - Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications. - Ensuring that the design is consistent with the higher-level architecture and requirements. -...

  • Tool designer for Plastic Injection Mould

    2 weeks ago

    Pune, India Paradise Placement Consultancy Full time

    Job Description:BASIC QUALIFICATION: · Post Graduate Diploma Mechenical / Post Diploma / Diploma in tooldesign from (NTTF / IGTR / GTTC)EXPERIENCE NEEDED: Experience in tool design in Plastic &rubber mould design & stamping.Design injection mould tools for plastic mould with additional knowledge of silicon rubber mould design using Creo 6.0 with product...

  • Senior Design Engineer- Plastic

    7 days ago

    Pune, Maharashtra, India Tata Technologies Full time

    Designation –Senior Design Engineer- PlasticExperience -3 to 8 yrsEducation - BE/B. Tech/ME/M. TechJob Location- PuneN/P- Imm. /15days/30 days/45 days Job Description : Minimum education level: Bachelor's Degree / Diploma in mechanical/ automobile/ production/ polymer engineering Experience : Degree / Diploma in mechanical/ automobile/ production/...

  • Tool designer for Plastic Injection Mould

    7 days ago

    Pune, Maharashtra, India Paradise Placement Consultancy Full time

    Job Description:BASIC QUALIFICATION: Post Graduate Diploma Mechenical / Post Diploma / Diploma in tooldesign from (NTTF / IGTR / GTTC)EXPERIENCE NEEDED:Experience in tool design in Plastic &rubber mould design & stamping.Design injection mould tools for plastic mould with additional knowledge of silicon rubber mould design using Creo 6.0 with product data...

  • Senior Design Engineer- Plastic

    3 days ago

    Pune, India Tata Technologies Full time

    Designation –Senior Design Engineer- PlasticExperience -3 to 8 yrsEducation - BE/B. Tech/ME/M. TechJob Location- PuneN/P- Imm. /15days/30 days/45 daysJob Description :Minimum education level:▪ Bachelor’s Degree / Diploma in mechanical/ automobile/ production/ polymer engineering Experience :Degree / Diploma in mechanical/ automobile/ production/...

  • Senior Design Engineer- Plastic

    4 days ago

    Pune, India Tata Technologies Full time

    Designation –Senior Design Engineer- PlasticExperience -3 to 8 yrsEducation - BE/B. Tech/ME/M. TechJob Location- PuneN/P- Imm. /15days/30 days/45 days Job Description : Minimum education level: ▪ Bachelor’s Degree / Diploma in mechanical/ automobile/ production/ polymer engineering Experience : Degree / Diploma in mechanical/ automobile/ production/...

  • Senior Design Engineer- Plastic

    1 week ago

    Pune, India Tata Technologies Full time

    Designation –Senior Design Engineer- PlasticExperience -3 to 8 yrsEducation - BE/B. Tech/ME/M. TechJob Location- PuneN/P- Imm. /15days/30 days/45 days Job Description : Minimum education level: ▪ Bachelor’s Degree / Diploma in mechanical/ automobile/ production/ polymer engineering Experience : Degree / Diploma in mechanical/ automobile/ production/...

  • Senior Design Engineer- Plastic

    1 week ago

    pune, India Tata Technologies Full time

    Designation –Senior Design Engineer- Plastic Experience -3 to 8 yrs Education - BE/B. Tech/ME/M. Tech Job Location- Pune N/P- Imm. /15days/30 days/45 days Job Description : Minimum education level: ▪ Bachelor’s Degree / Diploma in mechanical/ automobile/ production/ polymer engineering Experience : Degree / Diploma in mechanical/ automobile/...

  • Tool designer for Plastic Injection Mould

    7 days ago

    Pune, Maharashtra, India Paradise Placement Consultancy Full time

    Job Description: BASIC QUALIFICATION: · Post Graduate Diploma Mechenical / Post Diploma / Diploma in tooldesign from (NTTF / IGTR / GTTC) EXPERIENCE NEEDED: Experience in tool design in Plastic &rubber mould design & stamping. Design injection mould tools for plastic mould with additional knowledge of silicon rubber mould design using Creo 6.0...

  • Tool designer for Plastic Injection Mould

    2 months ago

    pune, India Paradise Placement Consultancy Full time

    Job Description: BASIC QUALIFICATION: · Post Graduate Diploma Mechenical / Post Diploma / Diploma in tooldesign from (NTTF / IGTR / GTTC) EXPERIENCE NEEDED: Experience in tool design in Plastic &rubber mould design & stamping. Design injection mould tools for plastic mould with additional knowledge of silicon rubber mould design using Creo...

  • Tool designer for Plastic Injection Mould

    3 weeks ago

    pune, India Paradise Placement Consultancy Full time

    Job Description: BASIC QUALIFICATION: · Post Graduate Diploma Mechenical / Post Diploma / Diploma in tooldesign from (NTTF / IGTR / GTTC) EXPERIENCE NEEDED: Experience in tool design in Plastic &rubber mould design & stamping. Design injection mould tools for plastic mould with additional knowledge of silicon rubber mould design using Creo...

  • Mechanical Designer

    7 days ago

    Pune, Maharashtra, India Philips Full time

    Job Title: Mechanical DesignerThe Mechanical Engineering (ME) will be part of a Sustaining Engineering team and will be responsible for the mechanical design and development of medical products for Philips Business units.Responsibilities include providing mechanical engineering support for lifecycle /sustaining projects for systems that are in production....

  • Systems Lead- Plastic

    2 weeks ago

    Pune, India Philips Full time

    JOB DESCRIPTIONJob TitleSystems Lead- PlasticJob Description#STET#LIPHILINJob title:Systems Lead- PlasticYou are responsible forLead the design and development of plastic components and products to align with project objectives. Possess the capability to review and create detailed mechanical drawings incorporating GD&T, specifications, and 3D models using...

  • Systems Lead- Plastic

    7 days ago

    Pune, Maharashtra, India Philips Full time

    JOB DESCRIPTIONJob TitleSystems Lead- PlasticJob Description#STET#LIPHILINJob title:Systems Lead- PlasticYou are responsible forLead the design and development of plastic components and products to align with project objectives. Possess the capability to review and create detailed mechanical drawings incorporating GD&T, specifications, and 3D models using...

  • Systems Lead- Plastic

    3 weeks ago

    pune, India Philips Full time

    JOB DESCRIPTION Job Title Systems Lead- Plastic Job Description #STET #LIPHILIN Job title: Systems Lead- Plastic  You are responsible for Lead the design and development of plastic components and products to align with project objectives. Possess the capability to review and create detailed mechanical drawings...