Vmc Operator

4 months ago

Kankurgachi Kolkata West Bengal, India SMJ Venture Private Limited Full time

**VMC OPERATOR JOB RESPONSIBILITIES**

Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed.
- Performs daily equipment maintenance inspections including but not limited to lubrication; fluid checks and additions; chip handling; scrap removal; etc. Per the Production Process.
- Performs program loading and verification procedures as required through DNC; USB; interfaces, etc.
- Performs CNC and ancillary equipment setup; run; and teardown operation procedures to assigned specifications inclusive of bar feeders, tool setups, collet changes, chuck jaw boring, tool touch-off, etc.
- Performs CNC cycle starts and stop procedures accurately and efficiently.
- Performs single step procedures through CNC program and Control Turret.
- Performs tool insert changes at predetermined intervals accurately and efficiently.
- Performs material loading of equipment including CNC’s, chucker, bar feeders, and ancillary equipment.
- Performs efficient teardown of previous setups through selective removal of unnecessary items.
- Performs edge breaking and de-burring operations as required per operational procedures.
- Accurately locates and verifies proper tools and tool inserts for operation of prescribed CNC program.
- Accurately reads and interprets production prints; measuring devices; performs quality checks on product.
- Gathers and measures parts as produced by CNC operations.
- Reports immediately to supervision or designee all operational malfunctions including but not limited to equipment failures; equipment damage; scrap; etc.
- Other tasks/functions as assigned.
- Performs multi-axis machining operations with high precision to operate and maintain machine, right angle heads, facing heads, inspection probe, jib crane, tool attachments, all types of fixtures, any and all set-up equipment, tool setter, tool holders, precision measuring instruments, power tools and any hand tools necessary for the fulfillment of job duties.
- Works with programmer to develop and test run programs. Proof reads programs and notifies supervisor/programmer of potential problems.
- Positions and secures work piece and fixtures on table.
- Assembles tooling as required.
- Uses higher math and engineering theories to work with tooling engineers to devise optimum tooling design and practices.
- Directs and assists crane operator with the rigging and moving of parts to load and unload machine.
- Performs final inspection of features using both the inspection probe and precision measuring equipment.
- Cleans and deburrs job as necessary. Attaches seals and protective covers as required.
- Performs minor maintenance on machine, attachments, and tooling as required.
- Keeps equipment and work area clean and orderly.
- Verifies identity and physical characteristics of materials as required.
- Maintains necessary records and completes process documentation and any other production records as required. Identifies equipment and product as required.

**Requirements**:

- High School Diploma or equivalent.
- Technical/Mechanical coursework.
- Skill in operating CNC machinery.
- 1 to 2 years manufacturing related experience.
- Good verbal and written communication skills.
- Sets up and operates machine tools such as CNC mills.
- Ability to use and accurately read blueprints and measure using devices such as calipers, micrometers, etc.
- Must be accurate and exhibit diplomacy and tact in dealing with others.
- Ability to input to and retrieve from computer-based software programs.
- Ability to spell, type, and read at an average speed.
- Can prioritize the work and coordinate with others.
- Self-motivated and can work with little supervision.
- Able to multi-task in a fast-paced environment.
- Able to solve problems and determine a course of action.
- Troubleshoots and anticipates problems.
- Capable of fostering a team environment.
- Supports complex customer’s needs/requests.
- Exhibits a sense of urgency to get the job done.

Salary:

- Rs.12,000/- to Rs.18,000/
- Schedule:

- Day shift

**Experience**:

- total work: 2 years (preferred)

Work Location: In person

Application Deadline: 05/10/2024
Expected Start Date: 07/10/2024

  • Vmc Operator

    3 weeks ago

    Uluberia, Howrah, West Bengal, India PRISTINE INDUSTRIES Full time

    **Responsibilities**: - As a VMC (Vertical Machining Center) Operator, you will be responsible for operating computer-controlled machines that produce precision metal parts used in manufacturing processes. - You will be responsible for programming, setting up, and operating the VMC machines, as well as maintaining quality standards and ensuring that...

  • CNC & Vmc Operator

    4 months ago

    Behala, Kolkata, West Bengal, India Oscar Equipments Pvt Ltd Full time

    VMC OPERATOR WITH OR WITHOUR PROGAMMING SKILL Pay: ₹8,086.00 - ₹25,128.90 per month **Benefits**: - Provident Fund Schedule: - Day shift - Evening shift - Morning shift Supplemental Pay: - Overtime pay - Yearly bonus **Education**: - Diploma (preferred) **Experience**: - VMC Programming: 2 years (preferred) Shift availability: - Day Shift...

  • Vmc & Wire Cut Operator

    7 months ago

    Taratala, Kolkata, West Bengal, India BDS Consultancy Full time

    A VMC (Vertical Machining Center) Operator is responsible for operating and maintaining computer-controlled machinery to create precision metal parts and components. Their primary duties include: - Machine Setup: Setting up the VMC according to blueprints, technical drawings, or job specifications. This involves loading the necessary tools, securing the...

  • Vmc and CNC Operator

    7 months ago

    Howrah, West Bengal, India Sarika Consultant Services (SCS) Full time

    **Name of position: VMC AND CNC OPERATOR** **2. Job Location (with Nearest Landmark) : JALAN COMPLEX,, HOWRAH-711411** **3. Gender: MALE** **4. Key Skill : FULL VMC AND CNC OPERATION** **5. Qualification: DIPLOMA/ENGINEER** **6. Experience: 6-7 YRS.** **7. Age Limit: 25 - 35** **8. Approximate Salary range: 20-30K** **10. Office timing: - Monday to...

  • Vmc Operator

    2 months ago

    Howrah, West Bengal, India TAD International Business Services Pvt. Ltd. Full time

    We are looking for VMC Operator for our Client Organization Experience: 2-3 years CTC: 16k Gross **Job Types**: Full-time, Permanent Pay: ₹16,000.00 per month Schedule: - Day shift **Experience**: - total work: 2 years (required) Work Location: In person

  • Vmc Setter/operator

    7 months ago

    Howrah, West Bengal, India Koro Solutions Pvt Ltd Full time

    We are looking for a dynamic energetic professional for our CNC Vertical Milling Center at Biradingi Howrah factory. Through knowledge of operating and new job setting is must Understanding / exposure to the programming would be an added advantage Exposure to Siemens Sinumarik operating panel would have added advantage Knowledge of both VMC and CNC...

  • Vmc Programmer

    7 months ago

    Sarsuna, Kolkata, West Bengal, India Super Plast Industries Full time

    *Qualification* VMC Programmer and Operator Haas Control *Skill* - Should know about injection moulds, should know how to use measuring tools like vernier, boregauge, micrometre etc *Experience* - 5 years *Working Hours* - 8am - 8pm (Sunday Holiday) *Salary* - 20k - 30k depends on skill *Location* - Shibrampur ,Mahestala , Kolkata...

  • Vmc Programmer Operator

    7 months ago

    Howrah Maidan, Kolkata, West Bengal, India SUNTECH ENGINEERING CORPORATION Full time

    Diploma Mechanical Production Supervisor required minimum 3 Years of Experience in VMC Machine Programming, proper knowledge Mechanical product of drawings. Immediate Joining. Contact No : 7278849399. Pay: ₹12,000.00 - ₹20,000.00 per month **Benefits**: - Life insurance Schedule: - Day shift - Morning shift - Rotational shift Supplemental pay...

  • CNC Vmc Operator

    3 weeks ago

    Kankurgachi, Kolkata, West Bengal, India SMJ Venture Private Limited Full time

    **Job description** **Roles and Responsibilities** - Set-up and manage CNC machines to perform different jobs including drilling, and milling. - Translate engineering drawings and requirements into dimensions for production. - Ensure the CNC machine operates in accordance with the guidelines of the company. - Oversee the machines while they execute the...

  • CNC Edm Wirecut Operator

    3 weeks ago

    Kankurgachi, Kolkata, West Bengal, India SMJ Venture Private Limited Full time

    **Roles and Responsibilities** Tool Room operations for mould manufacturing - operate / programming of CNC - EDM, Wire cut, EDM Drill machines and Trouble Shouting. 1. Execute of 2 axis CNC VMC programs for Die & Mold parts by using CAM software. 2. Transferring machine codes and setup instructions to CNC EDM Wirecut machines through software. 3. Regular...

  • CNC & Vmc Operator

    4 months ago

    Mogappair West, Chennai, Tamil Nadu, India SR Engineering Full time

    **Urgent Opening for Permanent CNC & VMC Operator in an Automotive company (SR ENGINEERING)** **CNC & VMC Machine operator**:Freshers or Exp **Qualification **:10th, +2**, **Any Deg, DME., **Shift**: Rotational shift (8 hrs) **Salary for 8 hrs**: **For Fresher - 14,000 per month** **For Experience - 15,500 per month** **Benifits: 1.5 Regular OT,...

  • CNC & Vmc Operator

    3 months ago

    Mogappair West, Chennai, Tamil Nadu, India SR Engineering Full time

    **Urgent Opening for a Permanent CNC & VMC Operator in an Automotive company (SR ENGINEERING)** **CNC & VMC Machine operator**:Freshers or Exp **Qualification **:10th, +2**, **Any Deg, DME., **Shift**: Rotational shift (8 hrs) **Salary for 8 hrs**: **For Fresher - 14,000 per month** **For Experience - 15,000 per month** **Benefits: 1.5 Regular OT,...

  • Freshers- Vmc Operator

    7 months ago

    Mulund West, Mumbai, Maharashtra, India Vegith Global Services Private Limited Full time

    We are looking for ITI Freshers for the below mentioned position at Mumbai - Mulund West location: **VMC Operator** **Job Description**: - Setting and machining various jobs - Manufacturing / Engineering Drawing reading knowledge is a must. - Machine Productivity and Maintenance knowledge - Fanuc / Haas / Mitsubishi Controller knowledge Experience -...

  • CNC Vmc Operator

    2 weeks ago

    Twenty-four Parganas, West Bengal, India MAHANADI STEEL AND IRON PVT LTD Full time

    Salary : From ₹15000-20000 a month Job type : Full-time Experience: Minimum 3 to 5 years Shift and schedule : Morning shift, Day Shift Benefits & Perks : Provident Fund, ESIC, Yearly Bonus. **Qualifications **:Diploma / ITI in Mechanical **Full Job Description** We are looking for CNC or VMC machine operators at our factory (Kona High Road, Howrah)...

  • Vmc Operator

    7 months ago

    Kolkata, India SMJ Venture Private Limited Full time

    **VMC OPERATOR JOB RESPONSIBILITIES** Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. - Performs daily equipment maintenance inspections including but not limited to lubrication; fluid checks and...

  • Vmc Setter Programmer

    4 weeks ago

    Coimbatore West, Coimbatore, Tamil Nadu, India sakvinyl solutions private Limited Full time

    **Job Title**: VMC Setter cum Operator - Aerospace Parts Position Summary**: A seasoned VMC Setter cum Operator with extensive experience (20 years) in precision machining, responsible for setting up, operating, and maintaining VMC machines to manufacture high-precision aerospace components. The role requires in-depth knowledge of machining practices,...

  • CNC Machine Operator

    7 months ago

    Howrah, West Bengal, India Sarika Consultant Services (SCS) Full time

    **VMC AND CNC OPERATOR** **3. Gender: MALE** **4. Key Skill : FULL VMC AND CNC OPERATION** **5. Qualification: DIPLOMA/ENGINEER** **Job Types**: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month **Benefits**: - Health insurance - Leave encashment - Life insurance - Paid sick time - Provident Fund Schedule: - Day shift Supplemental pay...

  • Vmc Operator

    7 months ago

    Ghatkopar West, Mumbai, Maharashtra, India Precicam Enterprises Full time

    Job Profile : You will be given NC programs and drawings of job. You have to load the job on the VMC and start the programs. Size of holes or pockets have to be maintained and checked. Types of jobs includes die and mould plates, core/cavity, machine parts, production parts Experience : Minimum 1 year. About Company : We are a reputed name in the industry...

  • CNC Operator Programmer

    2 months ago

    Howrah, West Bengal, India Astha Enterprise Full time

    CNC machine operator cum programmer. Machine Type - Turning, VMC, HMC Pay: ₹10,000.00 - ₹15,000.00 per month Schedule: - Rotational shift Supplemental Pay: - Yearly bonus **Experience**: - total work: 2 years (preferred) Work Location: In person

  • CNC Operator

    2 months ago

    Howrah, West Bengal, India TAD International Business Services Pvt. Ltd. Full time

    We are looking for VMC Operator for our Client Organization Experience: 2-3 years Duty Time: 8 hours CTC: 16k Gross + OT + Accommodation **Job Types**: Full-time, Permanent Pay: ₹13,000.00 - ₹15,000.00 per month **Benefits**: - Provident Fund Schedule: - Day shift - Fixed shift Supplemental Pay: - Overtime pay **Education**: - Higher...