Electrical Designer

1 month ago

Pune, India Philips Full time

**Job Title**: Electrical Designer

**Job title**:
One sentence description of role

**Your role**:

- Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications
- Ensuring that the design is consistent with the higher-level architecture and requirements
- Ensuring that the proposed design would have the safety, reliability and quality features built-in
- Responsible for ensuring that the design meets the performance, quality and cost criteria
- Conduct concept and feasibility studies. Leads the introduction of new technologies
- Ensuring that there is proper documentation per standards for the developed design
- Ensuring the mutual consistency and efficient integration of the separate components in modular design that meets the product specification
- Ensuring that his design modules meet the product certification requirements
- Drawing up personal schedule and reports on progress
- Defining and assessing the Work Breakdown Structure/planning/costs of his/her area
- Being abreast of technical developments in own field through study of literature and technical contacts
- Maintaining product and company reputation by complying with country specific regulations
- Supplier evaluation and communication


**You're the right fit if**:

- Completed engineering studies at University level; BE/BTech/ME/M-Tech in Electronics or Electrical Engineering, with 8 to 12 years of experience
- Knowledge of state-of-the-art methods/tools (CAD/simulation) used in electrical design
- Experience in Analog, Mixed Signal Board Design and Power Electronics designs
- Experience in 16/32-bit microcontroller-based design and interfacing
- Knowledge of cable harness design
- Knowledge of communication interfaces like RS232, RS485, CAN, EtherCAT, Ethernet and USB
- Knowledge of EMI/EMC standards and testing for conformance
- Good hands-on experience in schematics and PCB design tools (e.g. Cadence / mentor Graphics)
- Should have experience in DFMEA and design of Fail-safe systems and Sub-systems
- Should have good fundamental knowledge of Motors/Motor Drivers/ Position, Speed Encoders and should be able to analyze motor under different operating modes such as regenerative mode
- Experience in design of a communication gateway will be an added advantage.
- Experience in design or selection for off-the-shelf battery charger and battery management system will be an added advantage
- Should have experience in design of High speed digital interface
- Should have good fundamentals of electromagnetic field and design of electronics for high ambient magnetic and electromagnetic fields
- Should have an understanding of patient safety with knowledge of Insulation Diagram and Means of Protection (MOPP/MOOP)
- Knowledge of mechanical design compatibility aspects
- Knowledge of IEC 60601 standards will be an added advantage
- Knowledge of Embedded Software Programming will be an added advantage
- Ability to understand and debug problems across hardware/software boundaries
- Knowledge of Global Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA etc. will be an added advantage
- Hands-on experience with tools like Agile, Clear-quest, Windchill or equivalent
- Disciplined team worker, ability to work independently
- Result oriented team player
- Ability to present and articulate ideas to key stakeholders and leadership team
- Excellent communication skills and Positive ‘can do’ attitude
- Quality mindset in design and documentation
- Global and Cross-functional Experience/Skills in a Matrix Organization will be an added advantage
- New Product Introduction (NPI) and Product Life Cycle Management
- Product Obsolescence Management/Sustenance and Value Engineering

**About Philips**
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
- Learn more about our business.
- Discover our rich and exciting history.
- Learn more about our purpose.

  • Designer - Electrical

    4 weeks ago

    Pune, India Air Products Full time

    **Job Description and Qualifications** - An Electrical Designer supports the Lead Engineer / Lead Designer on the project and provide necessary support for technical interface with AP project execution teams. The primary purpose is the delivery of a safe, fit for purpose, electrical design to an agreed schedule and construction budget. - Responsible for...

  • Electrical Designer

    3 weeks ago

    Pune, Maharashtra, India Philips Full time

    Job TitleElectrical DesignerJob DescriptionJob title: Electrical DesignerYour Role:· Contribution to the Electrical architecture of modules / sub-assemblies.· Designing and documenting Electrical modules / sub-assemblies like E-cabinetdesign, cabling and interfacing, connectors and E-cabinet design.· All this is an environment where Electrical guidelines...

  • Electrical Designer

    3 weeks ago

    Pune, India Philips Full time

    Job TitleElectrical DesignerJob DescriptionJob title: Electrical DesignerYour Role:· Contribution to the Electrical architecture of modules / sub-assemblies.· Designing and documenting Electrical modules / sub-assemblies like E-cabinetdesign, cabling and interfacing, connectors and E-cabinet design.· All this is an environment where Electrical...

  • Electrical Designer

    4 weeks ago

    pune, India Sidel Full time

    Your Opportunity : Join our Electrical Engineering Design Team at Sidel and be at the forefront of developing future solutions and enhancing existing ones. As an Electrical Design Engineer, you will play a vital role in designing specific customer requests and contributing to the overall success of our projects. Your Mission Your Scope:...

  • Electrical Designer

    4 weeks ago

    Pune, India Sidel Full time

    Your Opportunity : Join our Electrical Engineering Design Team at Sidel and be at the forefront of developing future solutions and enhancing existing ones. As an Electrical Design Engineer, you will play a vital role in designing specific customer requests and contributing to the overall success of our projects. Your Mission Your Scope: As an...

  • Design (Electrical)

    1 month ago

    Pune, India Mastpro Consulting Engineers Full time

    **Mastpro Consulting Engineers Pvt. Ltd. MCEPL/HR/PER/REC/** **Job Posting Rev.: 0.0** **Company Name - **Mastpro Consulting Engineers Pvt. Ltd. **Position Vacant ** **Design (Electrical)** **Designation / Grade **Associate / Executive / Team Lead (Depending upon Experience) **Division -** Consultancy - Design (Electrical) **Department** **No. of...

  • Electrical Designer

    1 month ago

    Pune, India Philips Full time

    **Job Title**: Electrical Designer - ** You are a part of** Diagnostic X-Ray R&D team. Philips HIC, Pune is playing a key role in Philips global strategy for DXR. With Philips HIC, the foundation was laid to touch billions of lives and reiterate Philips commitment towards Indian and growth **Your role** - Responsible for Requirements, Design,...

  • Designer - Electrical

    4 weeks ago

    Pune, India Air Products Full time

    **Job Description and Qualifications** - Generate all electrical design deliverables like SLDs, Layouts (Substation/PDC Equipment arrangement, Cable Tray/Trench/Duct bank, Power, Lighting, Earthing, Hazardous Area classification, Heat Tracing, FA/PA/Telephone) extracting MTOs, and modelling of Electrical facilities. - Prepare Control Schematics,...

  • Electrical Designer

    4 weeks ago

    Pune, Maharashtra, India Sidel Full time

    Job Title: Electrical Design Engineer Company: Sidel Location: Chakan/Talawade, Pune About Us: Sidel is a global leader in providing innovative solutions for beverage packaging and production. We are dedicated to shaping the future of the industry through cutting-edge technology and exceptional engineering. Your Opportunity: Join our Electrical Engineering...

  • Designer - Electrical

    1 week ago

    Pune, Maharashtra, India Prodair Air Prod India Full time

    At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • Electrical CAD Designer

    2 months ago

    pune, India SGS Full time

    Position Title: Electrical CAD DesignerElectrical CAD Position Electrical Designer for complete PCBA design cycle from schematic to Gerber generation and electrical drawings such as wiring harnesses.Main Functions/Responsibilities Design Printed Circuit Board Assemblies (PCBAs) using toolsets Cadence Allegro and Altium. Design PCBAs from schematic to...

  • Electrical Designer

    2 weeks ago

    pune, India Philips Full time

    JOB DESCRIPTION Job Title Electrical Designer Job Description Job title: Electrical Designer  Your role: Is to develop electrical (sub-) systems and solutions (including their validation, testing and troubleshooting) for Fixed Interventional Guided Therapy (IGT) systems, you will work within a multi-disciplinary team on applying...

  • Electrical Designer

    2 weeks ago

    Pune, India Philips Full time

    JOB DESCRIPTION Job Title Electrical Designer Job Description Job title: Electrical Designer   Your role: Is to develop electrical (sub-) systems and solutions (including their validation, testing and troubleshooting) for Fixed Interventional Guided Therapy (IGT) systems, you will work within a multi-disciplinary team on applying research...

  • Electrical Designer

    3 weeks ago

    Pune, Maharashtra, India Philips Full time

    Job TitleElectrical DesignerJob Description#STET#PHILINJob title:Electrical DesignerYour role:You have the opportunity Manage high impact, complex sustaining & transfer projects that enables Philips to reduce risk, improve profitability, align with Philips' strategic supply base and optimize supply chain flexibility. The primary function within this role is...

  • Electrical Designer

    3 weeks ago

    Pune, India Philips Full time

    Job TitleElectrical DesignerJob Description#STET#PHILINJob title:Electrical DesignerYour role:You have the opportunity Manage high impact, complex sustaining & transfer projects that enables Philips to reduce risk, improve profitability, align with Philips’ strategic supply base and optimize supply chain flexibility. The primary function within this...

  • Electrical Designer

    4 weeks ago

    Pune, Maharashtra, India Philips Full time

    Job TitleElectrical DesignerJob DescriptionJob title:Electrical DesignerYour role:You have the opportunity Manage high impact, complex sustaining & transfer projects that enables Philips to reduce risk, improve profitability, align with Philips' strategic supply base and optimize supply chain flexibility. The primary function within this role is to execute...

  • Electrical Designer

    1 month ago

    Pune, Maharashtra, India Philips Full time

    **Job Title**: Electrical Designer **Job Title**:Electrical Designer In this role, you have the opportunity to design, develop and maintain Diagnostic Imaging/ MR components and products. You are responsible for identifying appropriate designs for overall system, sub-system and component levels. You will ensure that your design is consistent with the...

  • Electrical CAD Designer

    2 months ago

    Pune, India SGS Full time

    Position Title: Electrical CAD Designer Electrical CAD Position Electrical Designer for complete PCBA design cycle from schematic to Gerber generation and electrical drawings such as wiring harnesses. Main Functions/Responsibilities  Design Printed Circuit Board Assemblies (PCBAs) using toolsets Cadence Allegro and Altium.  Design PCBAs from...

  • Electrical CAD Designer

    2 months ago

    Pune, India SGS Full time

    Position Title: Electrical CAD Designer Electrical CAD Position Electrical Designer for complete PCBA design cycle from schematic to Gerber generation and electrical drawings such as wiring harnesses. Main Functions/Responsibilities  Design Printed Circuit Board Assemblies (PCBAs) using toolsets Cadence Allegro and Altium.  Design PCBAs from schematic...

  • Electrical CAD Designer

    2 months ago

    Pune, India SGS Full time

    Position Title: Electrical CAD Designer Electrical CAD Position Electrical Designer for complete PCBA design cycle from schematic to Gerber generation and electrical drawings such as wiring harnesses. Main Functions/Responsibilities  Design Printed Circuit Board Assemblies (PCBAs) using toolsets Cadence Allegro and Altium.  Design PCBAs from schematic...