Am - Production (CNC Bending Machine)

2 weeks ago

Pune, India Ample Leap Cognition & Technologies Pvt Ltd Full time

**ROLE - AM -PRODUCTION (CNC BENDING MACHINE)**

**Location - Pune**

**Job Description**:

- 1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
- 2) Positions and clamps end stops on machine to set specified location of bend.
- 3) Inserts or screws plug stops into guide wheel to set specified degree of bend.
- 4) Positions workpiece against end stop.
- 5) Locks holding clamp and guide clamp onto workpiece.
- 6) Lubricates workpiece with oil.
- 7) Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
- 8) May slide mandrel into tubing instead of using guide clamp.
- 9) May preheat workpiece, using hand torch or heating furnace.
- 10) May use hand-powered bending machine for short runs.
- 11) May fill tubes or pipe with sand, resin, or lead to prevent wrinkling or collapsing during bending operation.
- 12) May heat tube, using torch, and manually bend tube or pipe around forming blocks.
- 13) May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.
- 14) May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator I; Tube-Bending-Machine Operator I.

**Job Types**: Full-time, Permanent

**Salary**: ₹500,000.00 - ₹700,000.00 per year

Schedule:

- Day shift

**Experience**:

- total work: 4 years (preferred)

Ability to Commute:

- Pune, Maharashtra (required)

Ability to Relocate:

- Pune, Maharashtra: Relocate before starting work (required)

**Speak with the employer**
+91 9219869070

  • CNC Bending Operator

    4 weeks ago

    Pune, India NILKAMAL CONTROL SYSTEMS PVT. LTD Full time

    1. Manpower Planning 2. Trouble Shooting 3. Machine Handling 4. Work Planning 5. CNC Machine good Knowledge 6.Bending Machine knowledge must be preferred **Salary**: ₹12,000.00 - ₹20,000.00 per month **Benefits**: - Flexible schedule **Speak with the employer** +91 8956310957

  • Bending Machine Operator

    4 weeks ago

    Chakan, Pune, Maharashtra, India Sarwadnya Enterprises Full time

    Bending Machine Operator **Call - Mo. No. - 9172673856 To Call** Sarwadnya Enterprises **Address - Ground floor, Near Balaji Medical, Balaji Nagar, Pune - Nashik - Highway, Chakan** **Interview Timing - 10.30 am to 01.00 pm** **MO NO. - 9172673856 - TO CALL** Sheet metal Mfg. Company **Location - Talawade, Chakan** Post - Bending Machine...

  • Production Supervisor-laser Cutting

    4 weeks ago

    Pune, India Anushka Corporate Solutions Full time

    Post - **Production Supervisor-Laser Cutting & Bending** **Location - Pune** **Experience - 05-10 yrs** **Education - BE / Diploma in Engg** **Skills - CNC Laser Cutting, Bending, Operating and Programming, Planning Production, Customer Management with co ordination** **Job Profiles -** **Own bike must and Duty hrs - 10 Hrs work.** **Salary**:...

  • CNC Programmer

    1 month ago

    Chakan, Pune, Maharashtra, India DEVIKA RECRUITMENT MANPOWER SERVICES Full time

    **CNC PROGRAMMER - TURNING MACHINE FOR WALK IN INTERVIEW** **DEVIKA RECRUITMENT MANPOWER SERVICES** **BALAJI MEDIKAL, NEAR SUKHAKARTA MEDICAL, BALAJI NAGAR, Pune - Nashik - Highway, Chakan - Pune.** **Interview Timing - 09.30 am to 11.30 am** **CONTACT NO. - 8459128856 - MOHAN SIR,** **CNC MACHINE SHOP COMPANY** **LOCATION -- CHAKAN** **DIPARTMENT -...

  • Laser/bending Operator

    4 weeks ago

    Pirangut, Pune, Maharashtra, India Ms. Autocal Engineers Full time

    _**Third Party Pay Role Job**_ - **Company **_- MNC_ - **Job Profile**_ _- Laser/Bending Machine Operator/Programmer_ - **Job Location **_- Pirangut,Pune_ - **Education **_- ITI/DME / BE_ - **Experience **_-1-2 Years’ Experience in Laser operator_ - **Salary**_ _- 18000 TO 22000 CTC PM_ - **Role & Responsibilities**_ 1) Perform typical laser cutting...

  • CNC Operator

    1 month ago

    Chakan, Pune, Maharashtra, India DEVIKA RECRUITMENT MANPOWER SERVICES Full time

    **CNC OPERATOR - TURNING MACHINE FOR DIRECT WALK IN** **DEVIKA RECRUITMENT MANPOWER SERVICES** **NEAR BALAJI MEDIKAL, NEAR SUKHAKARTA MEDICAL, BALAJI NAGAR, Pune - Nashik - Highway,** **Chakan - Pune.** **Interview Timing - 09.30 am to 11.30 am** **CONTACT NO. - 8459128856 - MOHAN SIR,** **CNC M/C COMPANY** **LOCATION -- CHAKAN** **DIPARTMENT -...

  • CNC Machine Operator

    4 weeks ago

    Pune, India Shhambhawee Services Pvt Ltd Full time

    Set-up and manage CNC machines to perform different jobs including drilling, grinding and milling. - Translate engineering drawings and requirements into dimensions for production. - Ensure the CNC machine operates in accordance with the guidelines of the company. - Oversee the machines while they execute the tasks and make the necessary changes to produce...

  • CNC Machine Operator

    1 month ago

    Chakan, Pune, Maharashtra, India Reva Consultancy Services Full time

    CNC Machine operator CNC Drilling Machine **Job Description**: **Responsibilities**: - Setup and operate CNC machines according to specifications and work orders. - Load raw materials into the machine and secure them properly. - Adjust machine settings to ensure accuracy and quality of the finished product. - Monitor the machining process and make...

  • Side Bending Operator

    1 month ago

    Pune, India NILKAMAL CONTROL SYSTEMS PVT. LTD Full time

    We are Looking Side Bending Operator for our Plant 1 in Shivane Near Warje Malwadi, Pune. Skills Required: 1. Manpower Planning 2. Trouble Shooting 3. Machine Handling 4. Work Planning 5. CNC Machine good Knowladge **Salary**: ₹9,906.94 - ₹22,737.13 per month **Benefits**: - Cell phone reimbursement - Food provided - Health insurance - Leave...

  • Side Bending Operator

    1 month ago

    Pune, India NILKAMAL CONTROL SYSTEMS PVT. LTD Full time

    We are Looking Side Bending Operator for our Plant 1 in Shivane Near Warje Malwadi, Pune. Skills Required: 1. Manpower Planning 2. Trouble Shooting 3. Machine Handling 4. Work Planning 5. CNC Machine good Knowladge **Salary**: ₹9,906.94 - ₹22,737.13 per month **Benefits**: - Cell phone reimbursement - Food provided - Health insurance - Leave...

  • CNC Machine Operator

    1 month ago

    Pune, India Shhambhawee services Full time

    Roles and responsibilities: - Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc. - Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. - Translate instructions into computer commands so the machines can perform the correct function - Prepare and load raw...

  • CNC Machine Operator

    1 month ago

    Pune, India shhambhawee Services Pvt Ltd Full time

    Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc. - Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. - Translate instructions into computer commands so the machines can perform the correct function - Prepare and load raw materials and parts onto the...

  • CNC Machine Operator

    4 weeks ago

    Pune, India shhambhawee Services Pvt Ltd Full time

    Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc. - Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. - Translate instructions into computer commands so the machines can perform the correct function - Prepare and load raw materials and parts onto the...

  • CNC Machine Operator

    4 weeks ago

    Pune, India shhambhawee Services Pvt Ltd Full time

    Requirement For gas hydraulic plant Profile - CNC machine operator Qualification - Any graduate Experience - Min 1 -3yr ( CNC operator) Salary - 12000 to 20000/ - Depends on interview Location - Pune ( Chakan, bhamboli) Contact - HR kanchan 9343362177 **Salary**: ₹15,000.00 - ₹22,000.00 per month **Benefits**: - Food provided Supplemental pay...

  • CNC Machine Operator

    6 days ago

    Talegaon Dabhade, Pune, Maharashtra, India Shree Quality Service Full time

    CNC/ VMC Machine Operator Qualification - ITI/ Diploma Knowledge of cnc/vmc machine operator Pay: ₹15,000.00 - ₹22,000.00 per month **Benefits**: - Food provided - Health insurance - Provident Fund Schedule: - Day shift - Morning shift - Night shift - Rotational shift **Education**: - Diploma (preferred) **Experience**: - CNC Programming: 1...

  • Experienced CNC Turning Machine Operator

    1 month ago

    Pune, India PMT Machines Limited Full time

    EXP : 10 YEARS AND ABOVE.**JOB DESCRIPTION**: - Knowledge of component setups, methods and procedures, - Should be able to upload/download **CNC Turning**,** VMC, HMC** programs to machine controller, - Select and check cutting tools per program or **CNC Turning, **VMC, HMC** **documents. - Experience in setting up job for production orders, first lots,...

  • CNC Machine Operator

    1 month ago

    Pune, India SSPL Full time

    Preparing and operating CNC machines to perform tasks such as drilling, grinding, milling etc. Understanding specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. Translating instructions into computer commands so the machines can perform the correct function. **Salary**: ₹17,000.00 - ₹18,000.00 per...

  • CNC Operator

    6 days ago

    Pune, India Ms. Autocal Engineers Full time

    _**Job Role**_ _- CNC operator_ - **Job Location**_ _- Pirangut ,Pune_ - **Qualification **_- DME/DEE/any diploma_ - **Experience**_ _- 2-3 Years in CNC_ - **Salary**_ _-18000 -20,000 PM_ - **JD-**_ - CNC machine operation_ - Basics knowledge of CNC machine_ - Operations of CNC machine_ - Knowledge of tools_ - Knowledge of Gauges and Measuring Instrument_ -...

  • CNC Programmer

    6 days ago

    Chakan, Pune, Maharashtra, India DEVIKA RECRUITMENT MANPOWER SERVICES Full time

    **CNC PROGRAMMER - WALK IN INTERVIEW** **DEVIKA RECRUITMENT MANPOWER SERVICES,** **BALAJI MEDIKAL, NEAR SUKHAKARTA MEDICAL, BALAJI NAGAR, Pune - Nashik - Highway,** **Chakan - Pune.** **Interview Timing - 09.30 am to 11.30 am** **CONTACT NO. - 8459128856 - MOHAN SIR,** **MACHINE SHOP COMPANY** **LOCATION -- CHAKAN** **DIPARTMENT - PRODUCTION** **POST...

  • CNC ,vmc and Grinding Machine Operator

    6 days ago

    Dehu, Pune, Maharashtra, India Bhagat HR Services Full time

    Job Title: CNC ,VMC and Grinding Machine Operator Location: - Pune (Dehugaon) Salary: - upto 25K Experience: - 1 +years **Responsibilities**: Set up, operate, and maintain CNC VMC and grinding machines. Interpret technical drawings and program machines accordingly. Monitor machining process for quality control. Perform routine maintenance and...