CNC Milling Operator
5 months ago
**Role: CNC Machine Operator**
Experience: 0 to 1Yrs (Fresher preferrable)
Location: Coimbatore
Education: Diploma or B.E Mechanical
**Job Type**: Full time / Permanent - Onsite (WFO)
**Description**:
- Perform the process as per Process Drawings and the observed and measured dimensions are recorded in TPI QC1.
- Understand the process requirement as per process drawing and start the production for shift output.
- Visually check the part after completion of machining as per standard to avoid visual defect.
- Getting the first part approval from QC and settter and continue further production.
- Frequently monitor the rated production as per planned cycle time to aviod production delay
- Continiously monitor the dimension as per QC1-TPI, and correction based on the requirements.
- Maintaining 5's in the working area and maintain as per check sheet.
- Ensure the production and loss datas avaliable in the job card and handover to the supervisor at the end of the shift.
- Active participation in ESS & QCC for Defect Prevention & Detection.to reduce rejection.
- Handover the sample parts and Non conforming parts with part identification to inprocess quality.
Regards,
**Mohan Dass**
Executive HR - TA
**CACPL - Logistics Division (A unit of LMW group company)**
477, GKS Cotton Chambers, Kamarajar Road,
Coimbatore 641 015, India.
Phone : +91 741-809-9903
**Salary**: ₹13,000.00 - ₹16,000.00 per month
**Benefits**:
- Health insurance
- Paid sick time
- Provident Fund
Schedule:
- Day shift
Supplemental pay types:
- Performance bonus
- Yearly bonus
Ability to commute/relocate:
- Coimbatore, Tamil Nadu: Reliably commute or planning to relocate before starting work (preferred)
**Speak with the employer**
+91 7418099903
-
CNC Operator Programmer
5 months ago
Coimbatore, India SRI GOWRISH CNC PVT LTD Full timeSETTER CUM OPERATORS: 1. CNC TURN MILL, 2. CNC TURNING 2. VMC & HMC 3. CNC GRINDING 4. VTL MACHINE OPERATORS REQUIRED Skill Job Description**: - CNC Operator**: - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing od basic inspection instruments - Jaws setting - Fixture...
-
CNC & Vmc Operator
6 months ago
Coimbatore, India Ashni CNC Full timeCNC& VMC Operator responsibilities include: Preparing and operating CNC & VMC machines to perform tasks such as drilling, grinding, milling etc. Understanding specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. Translating instructions into computer commands so the machines can perform the correct...
-
CNC Turning
6 months ago
Coimbatore, India Hire Hubb Full time**CNC & VMC operator** Qualification : 10th/12th/Dip/ITI/ Any Degree Experience : Both Fresher (or) Experience Salary : 17000 to 28000 **Job role**: CNC Turning operator VMC operator **JOB PROFILE** - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing of basic inspection...
-
CNC Turning
6 months ago
Coimbatore, India Hire Hubb Full time**CNC & VMC operator** Qualification : 10th/12th/Dip/ITI/ Any Degree Experience : Both Fresher (or) Experience Salary : 10000 to 25000 **Job role**: CNC Turning operator VMC operator CNC & VMC Setter **JOB PROFILE** - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing of...
-
CNC Milling Machine Operator
6 months ago
Ganapathi, Coimbatore, Tamil Nadu, India Rewimitha Engineering Full timecnc milling machine operator (vmc) - 2nos DRO milling machine operator - 2nos min experience - 2 yrs **Job Types**: Full-time, Part-time Pay: ₹15,000.00 - ₹25,000.00 per month Expected hours: 48 per week Schedule: - Day shift **Education**: - Secondary(10th Pass) (preferred) **Experience**: - total work: 2 years (preferred) - tot: 2 years...
-
CNC Machine Operator
6 months ago
Coimbatore, India Aadhira CNC Product Private Limited Full time**Summary**: **Qualification and Skills required**: - 10th / 12th / ITI / Diploma / B.E. **Responsibilities**: - Operate CNC Turning / Milling Machines - Study and understand Engineering Drawings - Use various Measuring Instruments to measure the Machined component dimensions - Standard Maintenance of the Machines **Experience**: - Fresher **How to...
-
CNC Machine Operator
5 months ago
Chinnavedampatti, Coimbatore, Tamil Nadu, India Sri Gowrish CNC Private Limited Full timeThose who having Knowledge in **CNC, HMC, VMC,VTL MACHINE OPERATOR **can apply. Those who having with & without Experience in can apply. **Position: Machine Operators and Trainee Engineers** Company: Sri Gowrish CNC Pvt.Ltd Exp: 0 to 10 Years Years in Machines **(Operator cum Setter)** Qualification: ITI, Diploma & B.E Mech and ECE, Any Essential Skills:...
-
CNC Operator
5 months ago
Coimbatore, India HARSHA CNC Full timeDiploma/ITI/BE in mechanical engg - MIN 3-5 years work experience with CNC machines as operator - Good Knowledge in CNC machineries, processes, - Ability in decision making at critical situations **Salary**: ₹13,000.00 - ₹15,000.00 per month **Benefits**: - Provident Fund Schedule: - Rotational shift Supplemental pay types: - Overtime pay -...
-
Turning / Milling (CNC/vmc)
6 months ago
Coimbatore, India Hire Hubb Full time**JOB DESCRIPTION: CNC/VMC** - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing of basic inspection instruments - Jaws setting - Fixture setting Facilities - Accommodation-free - Food-available **CONTACT HR : 9043540381** **Job Types**: Full-time, Permanent,...
-
CNC Milling Setter
5 months ago
Coimbatore, Tamil Nadu, India Hire Hubb Full timeOperating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections CNC machine and setting. Part setting and programming 2D & 3D. Verified machines setting and programme control data for accuracy. Set controls and regulated speed, feed, coolant flow and angle of cut. Daily work management like action plan monitoring rework and...
-
CNC Turning and Milling Setter-annur
5 months ago
Coimbatore, Tamil Nadu, India Hire Hubb Full time**JOB PROFILE** Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing of basic inspection instruments - Jaws setting - Fixture setting **CNC setter** CNC machine and setting. Part setting and programming 2D & 3D. Verified machines setting and programme control data for...
-
CNC Turning and Milling Setter-saravanampatti
5 months ago
Coimbatore, Tamil Nadu, India Hire Hubb Full time**OPERATOR**: **JOB PROFILE** - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing of basic inspection instruments - Jaws setting - Fixture setting **CNC machine and setting.** Part setting and programming 2D & 3D. Verified machines setting and programme control data for...
-
Milling Machine Operator
5 months ago
Coimbatore, Tamil Nadu, India Hire Hubb Full timeJob Description: Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections CNC machine and setting. Part setting and programming 2D & 3D. Verified machines setting and programme control data for accuracy. Reading and interpreting technical blueprints and design models. Loading raw materials into the CNC machine. **Job...
-
CNC Turning
6 months ago
Coimbatore, Tamil Nadu, India Chakaradhara Aerospace & Cargo Private Limited Full time**Technician ( CNC Turning / Milling Machine operator)** Exp: 2 years to 10 years Location: Coimbatore Education: Diploma/ Eng Degree - Perform the process as per Process Drawings and the observed and measured dimensions are recorded in TPI QC1. - Understand the process requirement as per process drawing and start the production for shift output. -...
-
Openings for CNC and Vmc Operator
5 months ago
Coimbatore, India Hire Hubb Full timeJob Description**: - CNC Operator** - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing od basic inspection instruments - Jaws setting - Fixture setting - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections -...
-
CNC Turning
5 months ago
Coimbatore, Tamil Nadu, India Hire Hubb Full timeo Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing od basic inspection instruments - Jaws setting - Fixture setting **Job Types**: Full-time, Permanent, Fresher **Salary**: ₹12,000.00 - ₹25,000.00 per month **Benefits**: - Health insurance Schedule: - Day shift -...
-
CNC & Vmc Operator
6 months ago
Coimbatore, Tamil Nadu, India Hire Hubb Full timeJob Description: Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections CNC machine and setting. Part setting and programming 2D & 3D. Verified machines setting and programmer control data for accuracy. Reading and interpreting technical blueprints and design models. CNC Setter, Milling Operator, Resetting, Offset,...
-
CNC Operator Programmer
6 months ago
Coimbatore, India Hire Hubb Full timeOperating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing of basic inspection instruments - Jaws setting - Fixture setting CNC setter JOB PROFILE CNC machine and setting. Part setting and programming 2D & 3D. Verified machines setting and programme control data for...
-
CNC Operator
6 months ago
Coimbatore, India New Star Engineering Full timeSet-up and manage CNC machines to perform different jobs including drilling, grinding and milling. - Ensure the CNC machine operates in accordance with the guidelines of the company. - Oversee the machines while they execute the tasks and make the necessary changes to produce improved results. - Check machinery on a daily basis to guarantee functionality. -...
-
CNC (Turning Operator)
6 months ago
Coimbatore, India Hire Hubb Full time**JOB DESCRIPTION: CNC OPERATOR** - Operating of CNC turning/Milling machine - Tool/work offset setting - Offset corrections - Program corrections - Inspection - Handing of basic inspection instruments - Jaws setting - Fixture setting Facilities - Accommodation-free - Food-available Fresher or Experience CONTACT HR : 9043540381 **Job Types**: Permanent,...