CNC Bender Operator

2 weeks ago

Gautam Budh Nagar, India Shail International Group Full time

**Role & responsibilities**:

- Operating machine and maintenance
- Bending and rolling of various parts according to issued drawings
- Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
- Positions and clamps end stops on machine to set specified location of bend.
- Inserts or screws plug stops into guide wheel to set specified degree of bend.
- Positions workpiece against end stop.
- Locks holding clamp and guide clamp onto workpiece.
- Lubricates workpiece with oil.
- Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
- May slide mandrel into tubing instead of using guide clamp.
- May preheat workpiece, using hand torch or heating furnace.
- May use hand-powered bending machine for short runs.
- May fill tubes or pipe with sand, resin, or lead to prevent wrinkling or collapsing during bending operation.
- May heat tube, using torch, and manually bend tube or pipe around forming blocks.
- May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.
- May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator I; Tube-Bending-Machine Operator I.

Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Positions and clamps end stops on machine to set specified location of bend.
- ITI minimum along with knowledge of drawings
- 3 Years of Experience in operating a CNC sheet metal bending machine

**Salary**: ₹10,000.00 - ₹20,000.00 per month

**Benefits**:

- Leave encashment
- Paid sick time

Schedule:

- Day shift

Supplemental pay types:

- Yearly bonus

Application Question(s):

- How many years of CNC bending machine operating experience do you have?

**Experience**:

- total work: 1 year (preferred)

**Speak with the employer**
+91 8448996056

  • CNC & Vmc Operator

    2 months ago

    Gautam Budh Nagar, India Taalin Machinery & Robotics Pvt. Ltd. Full time

    VMC machine operators, or CNC machinists, manage computer numeric controlled (CNC) equipment from setup to operation, producing parts and tools from different resources including metal knowledge of VMC and CNC machine G-CODE and M-CODE **Job Types**: Full-time, Fresher **Salary**: ₹10,200.00 - ₹16,500.00 per month **Benefits**: - Cell phone...

  • CNC Operator

    3 weeks ago

    Gautam Budh Nagar, India dessin le arte Full time

    **Summary** **At Dessin Le Arte, we're dedicated to creating a Stone crafts and designer stone wall panels. Our products are related to Exterior and interior products, and we’re in search of a, passionate CNC Operator to help us bring the future of creativity to life.** **Role and Responsibilities** - Produce machined parts by programming, setting up,...

  • CNC Machine Operator

    2 weeks ago

    Gautam Budh Nagar, India Core Minds Tech Solutions Full time

    Position-CNC Machine Operator Location - Greater Noida Salary 18000 se 22000 Exp 1-3 years Education-ITI/Diploma **Job Types**: Full-time, Regular / Permanent **Salary**: ₹15,000.00 - ₹20,000.00 per month **Benefits**: - Food provided - Health insurance - Provident Fund Schedule: - Day shift - Flexible shift - Rotational shift Supplemental pay...

  • CNC Operator

    5 days ago

    Gautam Budh Nagar, India dessin le arte Full time

    SummaryAt Dessin Le Arte, we're dedicated to creating a Stone crafts and designer stone wall panels. Our products are related to Exterior and interior products, and we're in search of a, passionate CNC Operator to help us bring the future of creativity to life.Role and Responsibilities Produce machined parts by programming, setting up, and operating a...

  • CNC Operator

    3 weeks ago

    Laxmi Nagar, Delhi, Delhi, India Okie placement services private limited Full time

    CNC Operator? The CNC Operator is responsible for safely loading and unloading raw materials and setting up any equipment or accessories needed during production. They also calibrate all necessary items according to manufacturer guidelines to run smoothly. Pay: ₹12,000.00 - ₹25,000.00 per month **Benefits**: - Cell phone reimbursement Schedule: -...

  • CNC Operator

    2 weeks ago

    Viman Nagar, Pune, Maharashtra, India Speed Job Solution Full time

    **Vacancy for CNC Grinding Machine Operator**: **Total : 4 no's** **Qualifications: DME/ITI** **Experience: Min. 6 month as CNC Grinding Machine Operator** **Machines: Reishauer Fanuc Control** **Company: Top Brand MNC at Viman Nagar.** **Salary : 20,000-25,000/- Per Month** **Job Location: Viman Nagar, Pune** **Contact us for more details: ...

  • CNC Operator

    2 weeks ago

    Sahibzada Ajit Singh Nagar, Ludhiana, Punjab, India Emmbros Forgings Pvt. Ltd. Full time

    CNC operator for Steel Forging and Machining, manufacturing Auto components for Tractors, trucks. Shafts, gears, Pinion. - **Setting up and operating CNC** machines as per the job. - **Loading & unloading **workpieces and check proper setting. - Understanding **designs, Dimension/measurement and Crucial parameters**. - Prepare a test **run to check if the...

  • CNC Operator

    7 days ago

    Sahibzada Ajit Singh Nagar, Ludhiana, Punjab, India Emmbros Forgings Pvt. Ltd. Full time

    CNC operator for Steel Forging and Machining, manufacturing Auto components for Tractors, trucks. Shafts, gears, Pinion. - **Setting up and operating CNC** machines as per the job. - **Loading & unloading **workpieces and check proper setting. - Understanding **designs, Dimension/measurement and Crucial parameters**. - Prepare a test **run to check if the...

  • Shearing Machine Operator

    2 weeks ago

    Gautam Budh Nagar, India Krishna Ventures Ltd Full time

    Need Shearing Machine Operator. Should have minimum two years experience of operating the shearing machine. CNC shearing machine operator will be preffered. Should be 12th pass, ITI will be preffered. **Job Type**: Regular / Permanent **Salary**: From ₹15,000.00 per month **Benefits**: - Paid sick time Schedule: - Day shift Supplemental pay...

  • CNC Machine Operator

    4 days ago

    Devendra Nagar, Raipur, Chhattisgarh, India Studio 9 Full time

    CNC Machine operator. Artcam Software knowledge would be an added advantage. will be responsible for hadling & maintaining CNC machine **Salary**: ₹7,000.00 - ₹11,000.00 per month **Benefits**: - Flexible schedule Schedule: - Day shift Supplemental pay types: - Overtime pay - Performance bonus - Yearly bonus **Education**: - Diploma...

  • Vmc Operator Programmer

    1 week ago

    Gautam Budh Nagar, India Taalin Machinery & Robotics Pvt. Ltd. Full time

    Job Description: To handle CNC & VMC machine OPERATING / SETTING / PROGRAMMING / TOOLING / MAN POWER HANDLING having Knowledge of CAM and Manual Programming **Salary**: ₹17,000.00 - ₹30,000.00 per month **Benefits**: - Cell phone reimbursement - Health insurance - Paid sick time - Provident Fund Schedule: - Day shift Supplemental pay types: -...

  • CNC Operator

    1 week ago

    R. T. Nagar, Bengaluru, Karnataka, India AAA-POTEZ TECHNOLOGY INDIA PVT Full time

    Role : CNC Operator Prefered Industry : Aerospace Experience : 1 + min year Qualifications : Diploma / ITI Compensation : On current CTC Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc. Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings...

  • CNC & Vmc Operator

    2 weeks ago

    Nehru Nagar, Coimbatore, Tamil Nadu, India TRUSERVE ENGINEERS INDIA PRIVATE LIMITED Full time

    Truserve Engineers India Private Limited is seeking a full-time CNC Turning Operators for our on-site facility located in Coimbatore near Airport. Other responsibilities include monitoring machines and ensuring proper machine function, inspecting finished products, and identifying areas of improvement in daily operations. Able to handle 2 CNC Turning...

  • CNC Setter/operator

    2 months ago

    Udham Singh Nagar, India Daksh Manpower & Management Service Full time

    CNC Operator / supervisor opening -01 CTC- 15-20/ depends on interview and experience **Salary**: ₹15,000.00 - ₹20,000.00 per month **Benefits**: - Health insurance - Provident Fund Schedule: - Day shift Supplemental pay types: - Performance bonus Work Location: In person **Speak with the employer** +91 7248100026

  • Shearing Machine Operator

    5 days ago

    Gautam Budh Nagar, India Krishna Ventures Ltd Full time

    Need Shearing Machine Operator.Should have minimum two years experience of operating the shearing machine.CNC shearing machine operator will be preffered.Should be 12th pass, ITI will be preffered.Job Type: Regular / PermanentSalary: From ₹15,000.00 per monthBenefits: Paid sick timeSchedule: Day shiftSupplemental pay types: Yearly bonusAbility to...

  • CNC Operator

    2 months ago

    Sahibzada Ajit Singh Nagar, Ludhiana, Punjab, India Riva Systems (P) Ltd Full time

    - Lathe Machine (Bench Lathe, Centre lathe,) - Milling Machine (Horizontal Milling, Vertical Milling) - Granding Machine (Surface and Clandrical Grander) - C.N.C. Machine (CNC Turning Center) - Drilling Machine (Bench and Piller type) - Slotter Machine ( Standard Slotter) - Shapper Machine (Gear and Hydrallice type) **Salary**: ₹18,000.00 per...

  • CNC Operator

    2 weeks ago

    Sahibzada Ajit Singh Nagar, Ludhiana, Punjab, India SRISHTECH METAL CASTING (I) PVT.LTD Full time

    we need cnc plasma operator. please contact on this number 7527078512 Pay: ₹10,427.00 - ₹15,000.00 per month **Benefits**: - Cell phone reimbursement - Paid sick time - Provident Fund Schedule: - Morning shift Supplemental pay types: - Overtime pay

  • CNC Operator

    2 months ago

    Sahibzada Ajit Singh Nagar, Ludhiana, Punjab, India SRISHTECH METAL CASTING (I) PVT.LTD Full time

    we need cnc plasma operator. please contact on this number 7527078512 **Salary**: ₹10,427.00 - ₹15,000.00 per month **Benefits**: - Cell phone reimbursement - Paid sick time - Provident Fund Schedule: - Morning shift Supplemental pay types: - Overtime pay **Speak with the employer** +91 7527078512

  • CNC Turning Operator

    3 days ago

    Moti Nagar, Ludhiana, Punjab, India VISION FINANCE Full time

    Required CNC operator - ITI or fresher in any trade can be apply - Machining Experienced will be advantage - Knowledge of Fanuc Controller - Knowledge of Instruments - Knowledge of tools, setting etc. - Shift work only day time 12hrs - Incentive will be given on extra work hours **Job Types**: Full-time, Permanent, Fresher **Salary**: ₹13,500.00 -...

  • CNC Turning Operator

    3 weeks ago

    Moti Nagar, Ludhiana, Punjab, India VISION FINANCE Full time

    Required CNC operator - ITI or fresher in any trade can be apply - Machining Experienced will be advantage - Knowledge of Fanuc Controller - Knowledge of Instruments - Knowledge of tools, setting etc. - Incentive will be given on extra work hours - Shift work day 11 hrs - 12 hrs only **Job Types**: Full-time, Permanent, Fresher **Salary**: ₹13,500.00 -...