Plastics Injection Moulding Maintenance

4 months ago

Pune Maharashtra, India SAI PLASTICS Full time

4 To 5 Years Experience in Plastics injection moulding maintenance.

1. Knowledge about energy saving projects & energy efficiency.

2. Utilization of energy

3. Energy Management in APFC panels, cooling towers, chillers, oil filtration.

4. Ensures maintenance conforming to set standards (minimum machine stoppage,

5. minimum breakdowns, on time preventive maintenance for all plant equipment’s).

6. Enforces all documents/ records in place and up to date as per the department work instructions.

7. Ensure all documents/ records are effectively implemented and followed.

8. Ensures proper identification for all plant equipment’s.

a. Responsible for corrective and preventive actions on non-conformance.

9. Responsible for Training of team members on department work instructions / records.

10. Ensure department goals are achieved.

11. Should have thorough knowledge in the field of electrical, mechanical and electronics (if possible).

12. Should be capable of reading machine drawings and electrical circuits.

13. Should have knowledge of pneumatics, hydraulics.

14. PLC knowledge would be an advantage.

15. Should have thorough knowledge of all engineering machine equipment’s

16. (Injection moulding machines, assembly machines, special equipment’s and

a. plant equipment’s).

17. Should have worked in a commercial manufacturing / Injection moulding industry.

18. Should have handled at least manpower of 10members.

19. Should have knowledge of all moulding equipment’s like, Desiccant driers/ Dehumidifier driers / Dew point control measures.

20. Should have sufficient knowledge of 5S, Value engineering, why-why analysis.

21. Should be committed to work for smooth plant function.

22. Toggle, greasing & searching hydraulic & electrical fault

23. Preventive maintenance of hydraulic as well as electrical control

24. House wiring like Single Phase wiring new wirings of plant.

25. HT & LT Circuit of an Injection moulding plant

26. Check machines observed the abnormality and take the actions.

27. Planning and handling break down maintenance activities of injection moulding their related utility equipment.

28. Working as shift Engineer and reducing the breakdown hours of the machines by effective troubleshooting.

29. Maintenance of lubrication system on each shutdown.

30. Supervising and control the skilled and unskilled work man powers.

31. Knowledge of work permits, special permit, height work permits, and hot pass issued to external sources of engineering vendors, and service technicians.

32. Follow up maintenance of inspection, manuals, machine wise history data, Shift wise reading update.

33. Managing spares stock & Handling Supplier Base.

34. Primary team member of Energy Management system.

Pay: ₹25,000.00 - ₹40,000.00 per month

Work Location: In person

  • Plastic Injection

    3 months ago

    Bhosari, Pune, Maharashtra, India SAI PLASTICS Full time

    REQUIRED CANDIDATE FOR PLASTICS INJECTION MOULDING MACHINE POST - MOULD CHANGER & MOULD MAINTENANCE CANDIDATE SHOULD KNOW HOW TO CHANGE MOULD & HOW TO DO MAINTAINANCE OF MOULD CONTACT NO - 7796437037 Pay: ₹15,000.00 - ₹20,000.00 per month **Benefits**: - Health insurance - Provident Fund Schedule: - Day shift Work Location: In person

  • Plastic Injection Mould Supervisor

    7 months ago

    Ranjangaon Ganpati, Pune, Maharashtra, India Ganeshay enterprises placement services.. Full time

    **1/2 Year experience in Plastic Injection Moulding.**: - **Handle 30-40 Manpower.**: - **Knowledge of material like as PVC & Engineering Material.**: - **Knowledge of Basic Tool Maintenance.**: - **Knowledge of basic machine maintenance.** **Salary**: ₹25,000.00 - ₹30,000.00 per month **Benefits**: - Provident Fund Schedule: - Rotational...

  • Injection Moulding Supervisor

    1 month ago

    Vasai, Maharashtra, India Technique Safety Devices Pvt Ltd Full time

    Plastic Injection Moulding Unit Supervisor Join a veteran Security Seal Manufacturing Company as a Plastic Injection Moulding Unit Supervisor. We are looking for a skilled and experienced professional to oversee our moulding operations. Key Responsibilities: 1. Production Planning, Execution & Workforce Management: Plan daily production schedules, allocate...

  • Injection Moulding Supervisor

    7 months ago

    Hadapsar, Pune, Maharashtra, India Bluemark Promotions LLP Full time

    **Job Summary** **Key Responsibilities**: - Lead and oversee the injection molding team to guarantee effective production procedures. - Responsible for Molds assembly, Maintenance & Quality of Molds. - To guarantee a high-quality final product, monitor and regulate the injection molding processes - To guarantee continuous production, inspect and...

  • Injection Moulding Machine Operator

    2 months ago

    Vasai, Maharashtra, India ABHIJEET DIES & TOOLS PVT LTD Full time

    **Job Title**: Plastic Injection Molding Operator **Company**: Abhijeet Dies & Tools Pvt Ltd - Naigaon **Location**: Naigaon, Maharashtra **Job Type**: Full-Time **Key Responsibilities**: - Basic knowledge on Injection/Blow moulding machines. - Basic knowledge on plastic materials. - Production & trials of Mould as per production Plan, Maintenance work...

  • Injection Moulding Machine Supervisor

    7 months ago

    Bhosari, Pune, Maharashtra, India SAI PLASTICS Full time

    Lead and oversee the injection molding team to guarantee effective production procedures. * - Responsible for Molds assembly, Maintenance & Quality of Molds. * - To guarantee a high-quality final product, monitor and regulate the injection molding processes * - To guarantee continuous production, inspect and troubleshoot injection molding machinery. * -...

  • Plastic Injection Molding

    7 months ago

    Pune, Maharashtra, India SOHAM TALENT LINK PVT. LTD. Full time

    Department: - P.E Job Responsibilities: - Plastic injection molding m/c maintenance - Electrical Maintenance of Moulding Machinery - Utility maintenance work - HT,LT maintenance work - Shift handling work Designation: - Engineer Qualification: - Diploma,B.E(Electrical) Experience: - 5 to 7 yrs **Salary**: - 20k-27k CTC **Job Types**: Full-time,...

  • Injection Moulding Operator

    7 months ago

    Bhosari, Pune, Maharashtra, India SAI PLASTICS Full time

    **Required Injection Moulding Operator** **इंजेक्शन मोल्डिंग ऑपरेटर आवश्यक आहे** **इंजेक्शन मोल्डिंग ऑपरेटर की आवश्यकता है** Pay: ₹15,000.00 - ₹20,000.00 per month Schedule: - Day shift Work Location: In person

  • Injection Moulding Machine Operator

    7 months ago

    Dhayari, Pune, Maharashtra, India Anushka Corporate Solutions Full time

    **Post - Injection Moulding Machine Operator** *Industry - Plastic / Engineering* Education - Mechanical Engineering / PPT / CIPET / Polymers *Experience - 01-02 yrs. -------------------------------- - *Location - Pune - nanded CIty Own bike must Duty Hrs - 8.00 - AM - 8.00 PM **Salary**: ₹15,000.00 - ₹16,000.00 per month Schedule: - Monday to...

  • Moulding Machine Operator-shirwal

    9 hours ago

    Pune, India HR innovation corporation solutions Full time

    **Post - Moulding Operator on Roll** **Canteen Facility - 50 %** **Location - Shirwal, Dist. Satara** **Experience - 01-05 yrs** **Salary - Depend on skills** Educational Qualification: ITI/ Diploma/ BE Mechanical / PPO / Diploma in CIPET **Duty Hrs - 7.00 - 6.00 PM- Shift wise work Rotational as per Production** **Note - Relocated can apply** **Job...

  • Toolmaker Injection Mould

    7 months ago

    Bhosari, Pune, Maharashtra, India 3D Manufacturing Solutions Full time

    Mould Assembly, Specially new and Old Injection Mould. Well Knowledge to Assembling of Gauges and Fixture. Operation Milling Machine ,Surface Grinder Machine.Drilling, Tapping. Lathe machine. To analysis the problem and solve them Mould preventive maintenance. Pay: ₹15,184.58 - ₹28,000.00 per month **Benefits**: - Health insurance - Paid time...

  • Supervisor - Production (Injection Molding)

    3 weeks ago

    Pune H.O, Pune, Maharashtra, India Ashvini Magnets Pvt Ltd Full time

    _**No Online Interview Will be conducted Designation: Supervisor - Production (Injection Molding) Qualifications: Diploma in Plastic Molding Technology / BTE / CIPET with relevant experience. Experience: 2-4 years in a reputed automobile or auto ancillary industry Package: 2.0 to 3.75 Lakhs per annum. Job Requirements: A. Extensive Experience in Mold...

  • Moulding Pvc Fittings

    7 months ago

    Mumbai, Maharashtra, India wafi h.r.solutions pvt ltd Full time

    KUWAIT REQUIREMENT POSITION: OPERATOR PVC MOULDING PVC FITTINGS SHOULD BE CONVERSANT WITH OPERATION & MAINTENANCE OF INJECTION MOULDING PRODUCING PVC FITTINGS.sHOULD HAVE KNOWLEDGE AND EXPERIENCE OF CHANGING MOULDS AND DIES. MINIMUM 3 YEARS EXPERIENCE QUALIFICATION : SSC + 2 YRS OR ITI PLASTIC DIPLOMA. Schedule: - Day shift **Experience**: - total...

  • Production Planning Manager for Plastic Injection Moulding

    4 weeks ago

    Pune, Maharashtra, India Helvoet Rubber & Plastic Technologies Full time

    Job Overview:We are seeking an experienced Production Planning Manager to join our team at Helvoet Rubber & Plastic Technologies. As a key member of our production planning department, you will be responsible for ensuring the efficient planning and execution of our production processes.Key Responsibilities:Develop and implement effective production plans to...

  • Designer (Plastic Inj.moulds) - vasai

    7 months ago

    Mumbai, Maharashtra, India SN Recruitment Full time

    We are a leading manufacturer and supplier of **Injection Moulded Engineering Plastic Components **for various Industries having compliance with the **ISO 9001:2008 standards**, certified by IQNET/RINA. Since our inception in 1988 has established itself as a leading supplier in India for Submersible Pump Components made of **Engineering Plastics**, like...

  • Injection Moulding Company

    6 months ago

    Chakan, Pune, Maharashtra, India SP Consultancy & Enterprises Full time

    75k to 1.10Lack per Month | _place_ Chakan (PUNE) on roll **Job Responsibilities**: - Urgent Requirement PLANT HEAD for Injection Moulding Company Education: Any Diploma/Any Degree Experience: 10+ Years as Plant Head or Production Head or Production Manager in Injection Moulding Production Department Salary: 75k to 1.10Lack per Month *Job Location: Talwade...

  • Production Supervisor

    6 months ago

    Pune, Maharashtra, India Ashvini Magnets Pvt. Ltd. Full time

    Qualification : Any Graduate / ITI - PPO with relevant experience Experience : minimum 1- 3 years Location : Pune Job Profile: Mould Loading, Mould Setting etc. Connecting all auxiliary equipment’s like MTC, Robot and Grinders etc. Controlling Operators on various machines, and responsible for achieving the production of plastic moulded parts as...

  • Supervisor - Production (Injection Molding)

    2 months ago

    Chakan, Pune, Maharashtra, India Ashvini Magnets Pvt Ltd Full time

    Designation: Supervisor - Production (Injection Molding) Qualifications: Diploma in Plastic Molding Technology / BTE / CIPET with relevant experience. Experience: 2-4 years in a reputed automobile or auto ancillary industry Package: 2.5 to 3.5 Lakhs per annum. Job Requirements: A. Extensive Experience in Mold Process Setting, Robot Handling. B....

  • Supervisor - Production (Injection Molding)

    7 months ago

    Hinjewadi, Pune, Maharashtra, India Ashvini Magnets Pvt Ltd Full time

    Designation: Supervisor - Production (Injection Molding) Qualifications: Diploma in Plastic Molding Technology / BTE / CIPET with relevant experience. Experience: 2-4 years in a reputed automobile or auto ancillary industry Package: 2.5 to 3.5 Lakhs per annum. Job Requirements: A. Extensive Experience in Mold Process Setting, Robot Handling. B....

  • Production Supervisor

    7 months ago

    Pune, Maharashtra, India Ashvini Magnets Pvt. Ltd. Full time

    Qualification : Any Graduate / ITI - PPO with relevant experience Experience : minimum 1- 3 years Location : Pune Job Profile: Mould Loading, Mould Setting etc. Connecting all auxiliary equipment’s like MTC, Robot and Grinders etc. Controlling Operators on various machines, and responsible for achieving the production of plastic moulded parts as...