Crash CAE-Technical lead

4 weeks ago

Pune, India Tata Technologies Full time

Designation :Technical Lead- Structural CAE

Education :BE/B.tech/ME/M.tech

Experience :3 to 8 years

Loc: Pune


Job Description:


  • Full vehicle crash simulation model assembly, simulation and results post processing
  • Basic understanding of crash safety requirements/ regulations. Strong basic engineering fundamentals and vehicle crashworthiness.
  • FE model building of full vehicle model for crash analysis at various phases of product development.
  • Provide feedback and design guidelines to design teams based on crash simulations
  • Engineering of structure for meeting crashworthiness targets using CAE tools like LS-DYNA
  • Create analysis report to highlight current status of performance target achievement and improvement required in the design if targets are not met.
  • Experience in vehicle structure development for GNCAP and Euro NCAP loadcases is required
  • Provide countermeasures to meet target crash performance under the guidance of CAE lead engineer and interactions with design teams and other cross functional teams.
  • Achieving correlation between simulation model & test
  • Application of DOE techniques to solve crashworthiness problems
  • Develop and supervise component tests for simulation model correlation
  • Review crash simulation guidelines and create guidelines for new procedures/ simulations
  • Benchmarking study of competitors products
  • Verify proto build against engineering releases and test requirement
  • Issue modelling guidelines to FE modelling team
  • Material modelling for various automotive parts including metals, plastics, rubber, foam etc.
  • Crash CAE tools such as LS-DYNA , PAM-Crash, Oasys Primer suit, Ansa/Meta post
  • DOE techniques
  • Presentation skills
  • Full vehicle knowledge
  • Vehicle structural crashworthiness
  • Regulatory and NCAP (Euro NCAP and GNCAP) crash test requirements and protocols
  • Occupant injury mechanisms

  • CAE Engineer-Crash(Seating)

    3 weeks ago

    pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating)Education :BE/B.tech/ME/M.techExperience :6-10 YearsJob Requirements:· Creation of Seating CAE Models (Row1, Row2, etc)· Able to mesh the seat parts as per the relevant meshing standards using Hypermesh.· Able to build seat models using proper connections methodology using Hypermesh, Primer.· Able to debug seat...

  • CAE Engineer-Crash(Seating)

    3 weeks ago

    Pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating)Education :BE/B.tech/ME/M.techExperience :6-10 YearsJob Requirements:· Creation of Seating CAE Models [Row1, Row2, etc]· Able to mesh the seat parts as per the relevant meshing standards using Hypermesh.· Able to build seat models using proper connections methodology using Hypermesh, Primer.· Able to debug seat...

  • CAE Engineer-Crash(Seating)

    3 weeks ago

    Pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating)Education :BE/B.tech/ME/M.techExperience :6-10 YearsJob Requirements:· Creation of Seating CAE Models [Row1, Row2, etc]· Able to mesh the seat parts as per the relevant meshing standards using Hypermesh.· Able to build seat models using proper connections methodology using Hypermesh, Primer.· Able to debug seat...

  • CAE Engineer-Crash(Seating)

    3 weeks ago

    Pune, India Tata Technologies Full time

    Designation : CAE Engineer-Crash(Seating) Education :BE/B.tech/ME/M.tech Experience :6-10 Years Job Requirements: · Creation of Seating CAE Models (Row1, Row2, etc) · Able to mesh the seat parts as per the relevant meshing standards using Hypermesh. · Able to build seat models using proper connections methodology using Hypermesh, Primer. · Able to debug...

  • Senior Manager

    1 day ago

    Pune, India Tata Motors Full time

    Position Summary with Job ResponsibilitiesPosition Description FormatPosition Name Engineer Crash Simulation, Crash & Safety Position level L5DEM position name Lead Crash Simulation,Crash & Safety DEM position level L4FEM position name NA FEM position level NAPurpose of the positionthe positions exists?will happen if there is no one in the position (no one...

  • CAE Engineer-Crash

    3 weeks ago

    pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safetyEducation :BE/B.tech/ME/M.techExperience :6-10 YearsLoc : PuneJob Requirements:· Creation of CAE Models (System level / BIW / Full Vehicle)· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full...

  • Senior Manager

    4 weeks ago

    Pune, India Tata Motors Full time

    Position Summary with Job Responsibilities   Position Description Format Position Name Engineer Crash Simulation, Crash & Safety Position level L5 DEM position name Lead Crash Simulation,  Crash & Safety DEM position level L4 FEM position name NA FEM position level NA Purpose of the position the positions exists? will happen if there is no one in...

  • Senior Manager

    1 week ago

    pune, India Tata Motors Full time

    Position Summary with Job Responsibilities  Position Description FormatPosition Name Engineer Crash Simulation, Crash & Safety Position level L5DEM position name Lead Crash Simulation, Crash & Safety DEM position level L4FEM position name NA FEM position level NAPurpose of the position the positions exists? will happen if there is no one in the...

  • CAE Engineer-Crash

    3 weeks ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safety Education :BE/B.tech/ME/M.techExperience :6-10 YearsLoc: PuneJob Requirements:· Creation of CAE Models [System level / BIW / Full Vehicle]· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full...

  • CAE Analyst-Crash

    4 days ago

    Pune, India Tata Technologies Full time

    Designation :CAE Analyst-Crash & safetyEducation :BE/B.tech/ME/M.techExperience :3-6 YearsLoc: PuneJob Requirements:· Creation of CAE Models [System level / BIW / Full Vehicle]· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full vehicle...

  • CAE Analyst-Crash

    5 days ago

    Pune, India Tata Technologies Full time

    Designation :CAE Analyst-Crash & safetyEducation :BE/B.tech/ME/M.techExperience :3-6 YearsLoc: PuneJob Requirements:· Creation of CAE Models [System level / BIW / Full Vehicle]· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full vehicle...

  • CAE Engineer-Crash

    3 weeks ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safety Education :BE/B.tech/ME/M.techExperience :6-10 YearsLoc: PuneJob Requirements:· Creation of CAE Models [System level / BIW / Full Vehicle]· Able to model/debug passenger car full vehicle structural models using Primer.· Able to set up and simulate frontal, side, and rear impact models.· Able to run CAE full...

  • CAE Engineer-Crash

    3 weeks ago

    Pune, India Tata Technologies Full time

    Designation :CAE Engineer-Crash & safety Education :BE/B.tech/ME/M.tech Experience :6-10 Years Loc : Pune Job Requirements: · Creation of CAE Models (System level / BIW / Full Vehicle) · Able to model/debug passenger car full vehicle structural models using Primer. · Able to set up and simulate frontal, side, and rear impact models. · Able to run CAE...

  • CAE-Crash & Safety (Analyst)

    4 weeks ago

    pune, India Tata Technologies Full time

    Designation :Tech Lead_Crash & Safety (Analyst)Education :BE/B.tech/ME/M.techExperience :6-10 YearsLoc: PuneTool skillset- Ansa, LS-Dyna, MetaPost, AnimatorDomain - Interior Trims, IP & Console•Proficient in FE modelling, connection & integration of Pillar trims, IP & Console CAE Models using Ansa•Should be able to make markup for IP & CONSOLE, TRIMS...

  • CAE-Crash & Safety (Analyst)

    4 weeks ago

    Pune, India Tata Technologies Full time

    Designation :Tech Lead_Crash & Safety (Analyst)Education :BE/B.tech/ME/M.techExperience :6-10 YearsLoc: PuneTool skillset- Ansa, LS-Dyna, MetaPost, AnimatorDomain - Interior Trims, IP & Console•Proficient in FE modelling, connection & integration of Pillar trims, IP & Console CAE Models using Ansa •Should be able to make markup for IP & CONSOLE, TRIMS...

  • CAE-Crash & Safety (Analyst)

    4 weeks ago

    Pune, India Tata Technologies Full time

    Designation :Tech Lead_Crash & Safety (Analyst)Education :BE/B.tech/ME/M.techExperience :6-10 YearsLoc: PuneTool skillset- Ansa, LS-Dyna, MetaPost, AnimatorDomain - Interior Trims, IP & Console•Proficient in FE modelling, connection & integration of Pillar trims, IP & Console CAE Models using Ansa •Should be able to make markup for IP & CONSOLE, TRIMS...

  • CAE-Crash & Safety (Analyst)

    4 weeks ago

    pune, India Tata Technologies Full time

    Designation :Tech Lead_Crash & Safety (Analyst) Education :BE/B.tech/ME/M.tech Experience :6-10 Years Loc: Pune Tool skillset- Ansa, LS-Dyna, MetaPost, Animator Domain - Interior Trims, IP & Console •Proficient in FE modelling, connection & integration of Pillar trims, IP & Console CAE Models using Ansa •Should be able to make markup for IP & CONSOLE,...

  • Lead Engineer-CAE

    1 week ago

    Pune/Pimpri-Chinchwad Area, India Lear Corporation Full time

    Job Description:Understand customer requirements / project scope and deliverables and effective project management.SOR and DVP Plan and execution.Co-ordinate with Design & Product Engineering Teams for technical reviews / support.Responsible for developing project timeline and execute projects.Manage internal CAE & Engineering Reviews.Perform CAE-Test...

  • Sr. Analyst

    3 weeks ago

    Pune, India Tata Technologies Full time

    Designation :Sr. Analyst - Crash and Safety Education :BE//ME/ Experience :7-10 Years Loc: Pune Tool skillset - Ansa, LS-Dyna, MetaPost, Animator Domain - Interior Trims, IP & Console •Proficient in FE modelling, connection & integration of Pillar trims, IP & Console CAE Models using Ansa •Should be able to make markup for IP & CONSOLE, TRIMS...

  • Cae- Crash

    4 weeks ago

    Pune, India Tata Technologies Full time

    Tool skillset - LSDYNA, Hyperworks, Oasys Primer, D3PLOT, reporter, Hyperworks TCL/TK, Oasys javascript - Occupant Safety - The CAE Engineer will responsible to carry out automotive full vehicle occupant analysis and model build. Airbag details, seat belt routing, dummies injury evaluation, positioning. - Restraint Safety - Airbag ( passanger, driver etc )...