Fatigue and Damage Tolerance Lead Engineer

4 weeks ago

Bengaluru, India Expleo Group Full time

Overview:

This position is for Fatigue and Damage Tolerance Lead Engineer

Responsibilities:

  • Establishing (with Head of Function where appropriate) the engineering plan of tasks necessary to properly discharge the project requirements including any derived requirements.
  • The configuration control to secure a baseline and any consequent change management of the engineering baseline.
  • Optimising the achievement of engineering requirements.
  • Recording engineering justifications in support of project requirements.
  • Technical risk assessment.
  • During a project initiation phase, setting up checklists compliant to customer and internal requirement. During the life of the project, maintaining the checklists to take into account any evolution of requirement and conclusion of continuous improvement analyses.
  • Managing work performed to meet contract/order and regulatory requirements including engineering reviews performed by or on behalf of the Chief Engineer. Where appropriate, ensuring that "experts" outside of the project team who can contribute to the design review are invited to attend.
  • In the event that conflicts should arise between operational requirements and exercising of technical governance, the matter shall be referred through the Technical Governance route to the responsible Chief Engineer.
  • Ensuring the correct level of procedures have been adhered to:
  • In the generation of analyses, design schemes, drawings.
  • In the carrying out of engineering tasks
  • By ensuring that suitably authorised and qualified personnel are employed on the project
  • Ensuring that the necessary corrective actions are implemented to checked deliverables prior to authorisation and issue.
  • Recommending training and contributing to appraisals of junior and graduate engineers.
  • Is in possession of or working towards delegated signatory.

Qualifications:

BTech/MTech

Essential skills:

  • Knowledge of aircraft Fuselage and wing structure and aircraft loads
  • Experienced in spectrum generation and Kt Calculation
  • Good in Fatigue and Damage Tolerance (F&DT) calculations of Airbus aircrafts (fuselage section)
  • Well versed in ISAMI modules (including crack models, joint models) and ISAMI template preparation
  • Should have Fatigue and Damage Tolerance experience related to Single Aisle, Long Range and A350 programs
  • F&DT Analysis of Junctions, notches, unfolding radius, lugs & pins
  • Sizing and stress analysis of the Fuselage and Wing Structure and interfaces by means of hand calculations, numerical simulations (FEM)
  • Experience in numerical modeling, post-processing and reporting of the results
  • Very well-versed in stress dossier writing
  • Good in excel macros
  • Knowledge of Airbus processes and procedures
  • Expertise in the below tools is required
  • ISAMI
  • Hyperview (post processing knowledge)
  • Catia V5, PASS SSI (Basic Knowledge)
  • Nastran/Patran
  • Microsoft Office
  • Airbus Supply

Desired skills:

  • Visual basic and or python programming knowledge.
  • Automation of repeatable tasks / processes.
  • Experience in initial Design Stress (Static, FDT and FEM) tasks of Aircraft Structures.

Experience:

8 to 12 years

  • Fatigue & Damage Tolerance Engineer

    1 week ago

    Bengaluru, Karnataka, India Capgemini Full time ₹ 8,00,000 - ₹ 12,00,000 per year

    Consultant - Fatigue & Damage Tolerance Engineer Capgemini is hiring below position:- Designation: Consultant Experience: 4–6 Years Job Skill: Fatigue & Damage Tolerance Engineer Location: Bengaluru Note: Please mention the Designation while sharing your CV for reference. To apply, please email your CV.

  • Fatigue & Damage Tolerance Engineer

    20 hours ago

    Bengaluru, Karnataka, India Capgemini Full time ₹ 8,00,000 - ₹ 24,00,000 per year

    At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world's most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and...

  • Fatigue & Damage Tolerance Engineer

    1 day ago

    Bengaluru, Karnataka, India Capgemini Engineering Full time ₹ 8,00,000 - ₹ 12,00,000 per year

    At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world's most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and...

  • Fatigue and Damage Tolerance Lead Engineer

    2 weeks ago

    Bengaluru, Karnataka, India Expleo Full time ₹ 20,00,000 - ₹ 25,00,000 per year

    This position is for Fatigue and Damage Tolerance Lead EngineerResponsibilitiesEstablishing (with Head of Function where appropriate) the engineering plan of tasks necessary to properly discharge the project requirements including any derived requirements.The configuration control to secure a baseline and any consequent change management of the engineering...

  • Fatigue and Damage Tolerance Engineer

    3 weeks ago

    Bengaluru, India Capgemini Full time

    Job Description At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world's most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide...

  • Fatigue and Damage Tolerance Engineer

    2 weeks ago

    Bengaluru, Karnataka, India Expleo Full time ₹ 12,00,000 - ₹ 36,00,000 per year

    ResponsibilitiesThe translation of customer specifications into engineering solutions including the identification and mitigation of technical risk.The production of engineering calculations that are necessary to support any conceptual or detail engineering solution for which they are responsible.The detailing of engineering solutions in accordance with...

  • Aircraft (Airframe) Fatigue and Damage Tolerance (F&DT) Analysis Engin

    4 days ago

    Bengaluru, Mysuru, India Infosys Full time ₹ 12,00,000 - ₹ 36,00,000 per year

    Role & responsibilities:Identification of PSE ( Principal Structural Elements )Calculate Stress Concentration Factor. Wide Spread Fatigue Damage Factor, effect in fatigue due to Size, Material, joints, Machining quality, technology process, etc.Fatigue Index CalculationFatigue Equivalent Stress Calculation and extraction of Reference StressesFatigue Spectrum...

  • Fatigue and Damage Tolerance

    2 weeks ago

    Bengaluru, India Tata Technologies Full time

    Senior Airframe Engineer job involves investigating and producing Fatigue and damage tolerance justifications solutions for design deviations and existing repairs for simple and complex Primary Structures of metallic Fuselage Structure. **Following are the core responsibilities** Conversant with AIRBUS F&DT methods processes & terminologies In depth...

  • Fatigue and Damage Tolerance Engineer Aerospace Structures

    3 days ago

    Bengaluru, Karnataka, India Astrica Technologies Full time ₹ 8,33,333 - ₹ 25,00,000 per year

    •Proficiency in tools like NASGRO, FRANC3D, MSC Fatigue, NASTRAN/PATRAN, Hyper Mesh.•Strong understanding of fatigue phenomena, fracture mechanics, and regulatory compliance. Specializing in rotary-wing aircraft. FAR/CS 25.571, 29.571, MIL-STD-1530)

  • Senior Lead Engineer

    5 days ago

    Bengaluru, Karnataka, India RTX Full time ₹ 8,00,000 - ₹ 12,00,000 per year

    Date Posted: Country:IndiaLocation:North Gate Business Park Sy.No 2/1, and Sy.No 2/2, KIAL Road, Venkatala Village, Chowdeshwari Layout, Yelahanka, Bangalore, Karnataka Position Role Type:UnspecifiedJob Title: Senior Lead Engineer Position OverviewThe Senior Lead Engineer will lead structural analysis activities for metallic and composite aerospace...