Geotechnical Engineer

Position Overview The Geotechnical Design Engineer will provide technical expertise for the planning, analysis, and design of geotechnical solutions for Transmission & Distribution (T&D) infrastructure, including overhead transmission lines, substations, underground cable systems, and associated civil works. The role supports safe, reliable, and cost-effective designs by integrating geotechnical engineering principles with utility standards, construction methods, and site-specific ground conditions. Key Responsibilities 1. Geotechnical Analysis & Design Perform soil-structure interaction analysis for transmission line structures, substation foundations, and cable installations. Design shallow and deep foundations (spread footings, drilled shafts, piles, anchors, micropiles). Develop geotechnical design parameters based on soil investigation data. Conduct geotechnical modelling including slope stability, settlement analysis, bearing capacity assessments, liquefaction studies, and seismic evaluations. Design ground improvement solutions such as soil stabilization, compaction, grouting, and erosion mitigation. 2. Site Investigation & Data Interpretation Prepare scopes for geotechnical site investigations including drilling, in-situ testing (SPT, CPT), and lab testing. Review borehole logs, test results, and geotechnical reports to evaluate subsurface conditions. Provide geotechnical recommendations during route selection and substation siting. 3. Transmission & Distribution Support Provide foundation design for transmission towers/poles, equipment pads, gantries, and transformer foundations. Evaluate geohazards such as landslides, erosion, flooding, subsidence, and expansive or corrosive soils that may impact T&D assets. Support design of underground cable systems including trench stability, duct bank bedding/backfill design, and HDD bore path geotechnical assessments. 4. Construction & Project Support Provide engineering support during construction, including responding to RFIs, reviewing contractor submittals, and addressing unforeseen ground conditions. Participate in site visits to assess constructability and verify compliance with geotechnical recommendations. Collaborate with civil, structural, electrical, and environmental teams through all project phases. 5. Standards, Documentation & Quality Prepare geotechnical calculations, design reports, foundation drawings, and technical memos. Ensure designs comply with applicable codes (e.g., ASCE, AASHTO, IEEE, Eurocode, BS/EN, IS codes, utility standards). Maintain high standards of quality, safety, and regulatory compliance. Required Qualifications Bachelor’s degree in Geotechnical, Civil Engineering, or related field (Master’s preferred). 2–8+ years of geotechnical design experience; T&D or utility sector experience preferred. Proficiency in geotechnical analysis software (PLAXIS, GeoStudio, L-Pile, AllPile, STAAD Foundation, gINT, etc.). Strong understanding of soil mechanics, foundation design, and geohazard assessment. Ability to work on cross-disciplinary engineering teams and manage multiple projects. Strong technical writing and communication skills. Preferred Qualifications Experience with overhead transmission line foundation design (33 kV–765 kV). Experience with substation ground design, earthing, and civil works. Familiarity with HDD crossings and trenchless technologies. Professional Engineer (PE/CEng/Chartered) or working toward licensure. Soft Skills Problem solving and analytical thinking Collaboration with multidisciplinary teams Strong documentation and reporting skills Ability to work under deadlines and manage priorities