Engineering Manager

1 day ago

chennai, India Larsen & Toubro Full time

General Management skills:

Candidate must be experienced in supervising engineering teams on multiple projects. Must work well with other electrical, mechanical, and civil/structural engineers, designers, CAD operators, procurement / execution teams and Site teams. Candidate must have strong verbal and written communication skills;  Willingness for local travel Assigns personnel to projects with the capabilities required to successfully complete the assigned tasks. Provides planning so that current and future manpower requirements are met. Performs employee evaluation. Monitors job performance so that personnel can be recommended for promotion or be provided with additional training as required. Develops scopes of work, assumptions and clarifications, and man-hour estimates in response to Requests for proposals.

Responsibilities:

Design Responsibilities:

Design Calculations:

Project DBR preparation understanding the nature of contract, scope, interfaces, design risks, balancing between technical matters and BOQ/ Cost provisions. Accurately performs and/or checks electrical design calculations starting from load list preparation, substation equipment sizing, Power system analysis using ETAP including load flow, short circuit, motor starting studies and device coordination studies. Power cable sizing, Earthing resistances and sizing, Lightning protection risk studies, Lighting design using DIALux. Should be conversant in using Microsoft Excel with ability to do programming using VBA and to automate calculations.  Should be thorough and conversant with BIS, IEC, IEEE, NBC, CPWD, CBIP, IE & CEA rules. Should have a very good multi-disciplinary understanding to effectively Interface with various other Lead Engineers.  Should be able to maintain a cordial relationship with client clearing all questions and comments timely and to obtain approvals by promptly resolving client issues. Provides training so that new employees are indoctrinated into company work procedures, familiarized with company standards, and develop a sense of the quality required for the work. In addition, provides training to the team on a periodic basis so that they are abreast of all latest requirement.

Layout Engineering, Estimation and BOQ:

Should be conversant with Hands on overview / working knowledge on BIM software such as REVIT, PDMS etc.. and 2D CAD software such as AutoCAD, Microstation etc.. Should have knowledge to refer, review, understand, interpret and comment on drawings/ layouts of civil (RCC, Steel framed, Foundations / Piles, Deck slabs, Tunnels, Jetties, Retaining walls etc..), Mechanical (P&ID, Equipment layouts, Piping, HVAC, PHE, Fire protection etc..), ELV (Control system, BMS SCADA, Fire alarm, CCTV, Public addressing, Filed instrumentation etc..)  Conceptualizing, development, detailing and preparation of GFC drawings / Shop drawings for Electrical substation including Oil/ Dry type transformers, HT AIS and GIS switchgears upto 33kV, LT switchgears, Diesel generators, UPS, Battery chargers, MV & LV VFD, MV & LV Soft starters, Static frequency convertors, High power AC-DC convertors, Cope panels etc…addressing detailed civil interfaces like foundation, oil pit, trenches, openings / cutout, sleeves and general operation, maintenance and material handling arrangements as necessary as per IE rules and other statutes. Preparation of basic, detailed, GFC Single line diagrams with all necessary relay protections, metering, indication, operation, controls, safety interlocks, redundancies, protection grading and coordination strictly meeting contract / statutory requirements. Working knowledge on relaying & protection of Switchgears, transformers, cables, motors, VFD, UPS, Soft starters is a must. Preparation of basic, detailed and GFC / Shop drawings of Lighting, Cable tray, Earthing, lightning, conduiting/ wiring drawings etc.. Preparation of power & control cable schedule, tray sizing, earthing schedule etc.. Preparation of signal interface matrix for Electrical switchgear, electrical motors / VFD/ Soft starters with the Instrumentation control system. Preparation of inputs for buildings/ commercial spaces with BMS SCADA. Expertise / working knowledge in cathodic protection, Hazardous area classification and flame proof equipment is preferred. BOQ/ BOM estimation 

Procurement, installation, commissioning and handover

Understands the various contracting methods and able to prepare RFQ with complete information on the scope, datasheets, specification, drawings, interfaces, risk factors.  Ability to critically evaluate, weight the alternatives and technically bring all vendors at par and clear the offers technically for commercial proceedings covering all the risks of conflicts avoiding cost implication with the supplier. Ability to review the vendor technical submissions thoroughly w.r.t the technical, contractual, site related installation & commissioning and constructability aspects.  Should have attended factory inspection of routine and type tests for all the electrical equipment and have a working knowledge on the codes and standards governing the factory testing of equipment.

Should be able to offer technical assistance to site from installation to handover as necessary. 

  • Piping Engineer

    2 months ago

    Chennai, India Padink Engineering Full time

    We are looking for a highly skilled and detail-oriented Piping Engineer to join our engineering team. The ideal candidate will have a strong background in piping design and engineering, with experience in planning, designing, and overseeing the installation of piping systems. As a Piping Engineer, you will be responsible for ensuring that piping systems are...

  • Piping Engineer

    2 months ago

    Chennai, India Padink Engineering Full time

    Job DescriptionWe are looking for a highly skilled and detail-oriented Piping Engineer to join our engineering team. The ideal candidate will have a strong background in piping design and engineering, with experience in planning, designing, and overseeing the installation of piping systems. As a Piping Engineer, you will be responsible for ensuring that...

  • Electrical and Instrumentation

    2 months ago

    Chennai, India Padink Engineering Full time

    Job DescriptionWe are seeking a highly skilled and motivated Electrical and Instrumentation (E&I) Engineer to join our team. The ideal candidate will have a strong background in electrical engineering and instrumentation, with experience in designing, implementing, and maintaining control systems and electrical equipment. You will be responsible for ensuring...

  • Electrical and Instrumentation

    2 months ago

    Chennai, India Padink Engineering Full time

    We are seeking a highly skilled and motivated Electrical and Instrumentation (E&I) Engineer to join our team. The ideal candidate will have a strong background in electrical engineering and instrumentation, with experience in designing, implementing, and maintaining control systems and electrical equipment. You will be responsible for ensuring the...

  • Engineer

    2 weeks ago

    Chennai, India Hyundai Engineering Co. Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC)Be a part of something big. Here's an opportunity for you to join with us.Current Vacancies:Looking for Engineers from Oil and Gas, Petrochemical Plant backgroundProcess Engineer - Exp: 4 - 10 yearsRotating Machinery Design Engineer - Exp: 4 - 15 yearsStationary Equipment & Package Design Engineer - Exp: ...

  • Engineer

    2 weeks ago

    Chennai, India Hyundai Engineering Co. Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC)Be a part of something big. Here's an opportunity for you to join with us.Current Vacancies:Looking for Engineers from Oil and Gas, Petrochemical Plant backgroundProcess Engineer -Exp:4 - 10 yearsRotating Machinery Design Engineer -Exp:4 - 15 yearsStationary Equipment & Package Design Engineer -Exp:4 - 12...

  • Engineer

    2 weeks ago

    Chennai, India Hyundai Engineering Co. Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC)Be a part of something big. Here's an opportunity for you to join with us.Current Vacancies:Looking for Engineers from Oil and Gas, Petrochemical Plant backgroundProcess Engineer -Exp:4 - 10 yearsRotating Machinery Design Engineer -Exp:4 - 15 yearsStationary Equipment & Package Design Engineer -Exp:4 - 12...

  • Engineer

    2 weeks ago

    Chennai, India Hyundai Engineering Co. Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC) Be a part of something big. Here's an opportunity for you to join with us. Current Vacancies: Looking for Engineers from Oil and Gas, Petrochemical Plant background Process Engineer - Exp: 4 - 10 years Rotating Machinery Design Engineer - Exp: 4 - 15 years Stationary Equipment &...

  • Engineer

    2 weeks ago

    Chennai, India Hyundai Engineering Co. Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC) Be a part of something big. Here's an opportunity for you to join with us. Current Vacancies: Looking for Engineers from Oil and Gas, Petrochemical Plant background Process Engineer - Exp: 4 - 10 years Rotating Machinery Design Engineer - Exp: 4 - 15 years Stationary Equipment & Package Design Engineer...

  • Engineer

    2 weeks ago

    Chennai, India Hyundai Engineering Co. Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC) Be a part of something big. Here's an opportunity for you to join with us. Current Vacancies: Looking for Engineers from Oil and Gas, Petrochemical Plant background Process Engineer - Exp: 4 - 10 years Rotating Machinery Design Engineer - Exp: 4 - 15 years Stationary Equipment & Package Design Engineer...

  • Engineer

    4 weeks ago

    Chennai, India Hyundai Engineering & Construction Co.,Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC)Be a part of something big. Here's an opportunity for you to join with us.Current Vacancies:Looking for Engineers from Oil and Gas, Petrochemical Plant background:Process Engineer - Experience: 4 - 10 yearsRotating Machinery Design Engineer - Experience: 4 - 11 yearsStationary Equipment & Package Design...

  • Engineer

    4 weeks ago

    Chennai, India Hyundai Engineering & Construction Co.,Ltd. Full time

    HYUNDAI ENGINEERING CHENNAI PRIVATE LIMITED (GEC)Be a part of something big. Here's an opportunity for you to join with us.Current Vacancies:Looking for Engineers from Oil and Gas, Petrochemical Plant background:Process Engineer - Experience: 4 - 10 yearsRotating Machinery Design Engineer - Experience: 4 - 11 yearsStationary Equipment & Package Design...

  • Electrical and Instrumentation EI Engineer

    4 weeks ago

    Chennai, India Padink Engineering Full time

    We are seeking a highly skilledand motivated Electrical and Instrumentation (E&I) Engineerto join our team. The ideal candidate will have a strong backgroundin electrical engineering and instrumentation with experience indesigning implementing and maintaining control systems andelectrical equipment. You will be responsible for ensuring thereliability and...

  • EXIM Manager

    6 hours ago

    chennai, India Sanmar Engineering Corporation Full time

    Sanmar Engineering is looking for EXIM Manager Work Location: Karapakkam ,Chennai Exp : 15 to 20 years exp in Imports & Exports JOB CONTENT Imports & Exports co-ordination and liaisoning with Banks KEY RESPONSIBILITIES 1) Expertise in filing of BOEs, SBs 2) Knowledge on HS Codes, FTAs, COOs 3) Experience in handling and coordinating with CHAs, Freight...

  • EXIM Manager

    2 weeks ago

    chennai, India Sanmar Engineering Corporation Full time

    Sanmar Engineering is looking for EXIM ManagerWork Location: Karapakkam ,ChennaiExp : 15 to 20 years exp in Imports & ExportsJOB CONTENTImports & Exports co-ordination and liaisoning with BanksKEY RESPONSIBILITIES1) Expertise in filing of BOEs, SBs2) Knowledge on HS Codes, FTAs, COOs3) Experience in handling and coordinating with CHAs, Freight Forwarders4)...

  • EXIM Manager

    2 weeks ago

    Chennai, India Sanmar Engineering Corporation Full time

    Sanmar Engineering is looking for EXIM Manager Work Location: Karapakkam ,Chennai Exp : 15 to 20 years exp in Imports & Exports JOB CONTENT Imports & Exports co-ordination and liaisoning with Banks KEY RESPONSIBILITIES 1) Expertise in filing of BOEs, SBs 2) Knowledge on HS Codes, FTAs, COOs 3) Experience in handling and coordinating with CHAs,...

  • EXIM Manager

    2 weeks ago

    Chennai, India Sanmar Engineering Corporation Full time

    Sanmar Engineering is looking for EXIM Manager Work Location: Karapakkam ,Chennai Exp : 15 to 20 years exp in Imports & Exports JOB CONTENT Imports & Exports co-ordination and liaisoning with BanksKEY RESPONSIBILITIES 1) Expertise in filing of BOEs, SBs 2) Knowledge on HS Codes, FTAs, COOs 3) Experience in handling and coordinating with CHAs, Freight...

  • EXIM Manager

    1 day ago

    chennai, India Sanmar Engineering Corporation Full time

    Sanmar Engineering is looking for EXIM Manager Work Location: Karapakkam ,Chennai Exp : 15 to 20 years exp in Imports & Exports JOB CONTENT Imports & Exports co-ordination and liaisoning with BanksKEY RESPONSIBILITIES 1) Expertise in filing of BOEs, SBs 2) Knowledge on HS Codes, FTAs, COOs 3) Experience in handling and coordinating with CHAs, Freight...

  • EXIM Manager

    2 weeks ago

    Chennai, India Sanmar Engineering Corporation Full time

    Sanmar Engineering is looking for EXIM Manager Work Location: Karapakkam ,Chennai Exp : 15 to 20 years exp in Imports & Exports JOB CONTENT Imports & Exports co-ordination and liaisoning with BanksKEY RESPONSIBILITIES 1) Expertise in filing of BOEs, SBs 2) Knowledge on HS Codes, FTAs, COOs 3) Experience in handling and coordinating with CHAs, Freight...

  • Piping Engineer

    3 hours ago

    chennai, India Areawell Energy Engineering Pvt. Ltd. Full time

    Engineers – PipingPiping Stress Engineer:Experience:5 to 10 YearsJob Location:ChennaiJob Profile:· Conduct pipe stress engineering of piping systems as per ASME, ANSI B31.3 code needs using Caesar II software program.· Perform evaluation of nozzle loads or vessels stress utilizing WRC 107/297 capability of Caesar II program.· Develop engineering...